GpsMap- With GPSMap, you can use your own maps to display your position.
FEATURES
displays location and waypoints on a map, displays compass or latitude/longitude;
add, remove maps;
add, remove a waypoint by typing its coordinates or marking its location on map;
calibrate maps manually or importing from OziExplorer;
phone standby mode can be switched off;
connection to the GPS device is restored automatically;
position source could be selected (Network based positioning also usable);
correct mapping even for different projection systems
metric/imperial/nautical units.
NEW:save route into WP/CSV/KML file.
STARTUP
(Optional) Start the GPS device;
Start the application, select the desired device (only at the first run, you can change it later in Settings);
Current position displayed
DISPLAY
Text: current position in WSG 84 format, speed, direction, altitude is displayed (text is red if no connection or no valid position is received from GPS device) Map: current position is displayed with a yellow-black dot in the center of the screen (the map moves as position changes, dot always remains in the center). Dot blinks with red if no connection or no valid position is received from GPS device. Waypoint are also shown on map in order to help users to reach they desired position. Compass: shows heading, points of compass, and direction of the next waypoint (other waypoints are also shown).
REQUIREMENTS FOR MAPS
should be in GIF, JPG, PNG or BMP format;
do not use too large maps, it will e.g. above 1000x1000 pixel, because the loading of the images will be slowed down, use several maps if large are should be covered.
select one or more files or directories (for directiories, all applicable files in the directories will be added to the list) using the joy, then press OK;
the map will be listed, with a red X mark, which means that is not calibrated yet, and it may not be used until it is calibrated.
HOWTO CALIBRATE A MAP ON THE PHONE
For calibrating a map, you have to go to at least two different places on the map by foot, by car, by bus, etc., with the GPS device and your phone. Both times, you have to locate your position on the map by selecting Options/View and calib. at the list of the maps. Press 'I am here' to record your positon (a red dot will show it on the map). After you have set at least three places, the red X mark at the list of the maps will become a green sign.
You can calibrate a map on your PC with OziExplorer, if you know the coordinates of at least two points on the map.
HOWTO CALIBRATE A MAP ON A PC WITH OZIEXPLORER
Download OziExplorer (http://www.oziexplorer.com), and start the TRIAL version (if you do not have a full version, of course). Select "File/Load and calibrate map image", select the datum (usually WSG-84) and projection system (e.g. Latitude/Longitude).
Add at least two points: select Point 1 on the tab on the right, select the position on the image, then enter the coordinates of that point. Repeat this with another point as Point 2. Please use points far away from each other, e.g. one in the left bottom part of the image, one in the top right part of the image. Select save, then exit.
HOWTO INSTALL A MAP CALIBRATED WITH OZIEXPLORER
copy the map (*.gif, *.jpg, *.png, *.bmp) and the calibration file (*.map) to the phone (e.g. with PcSuite, into the same directory);
navigate through the directory structure pressing the joy left or right, select one or more files (the icon for maps with calibration files will be "OZI") or directories (for directiories, all applicable files in the directories will be added to the list) using the joy, then press OK;
the map will be listed, with a green sign, which means that it is calibrated.
HOWTO DISPLAY YOUR POSITION USING A MAP
After calibrating a map, you can use it to display your position. Press FIRE to set the selected map as default, or set it to 'Automatic'. In automatic mode, always the map available for the current position will be displayed.
Panning: your position is in the center of the map, however, you can pan the map using the joystick (press the joy to make it centered again).
Zooming: you can zoom in or out using the * and the # keys.
HOWTO ADD WAYPOINT USING MAP SCREEN
Go to the Map screen, and use the joystick to move the map;
When a map is moved, a crosshair will shown up in the middle of the screen;
In Options menu choose "Add this waypoint" then press "OK".
SETTINGS
Always on: prevent the phone from going into standby mode (to switch off the screen) - works only if a map is displayed and the position is valid.
Positioning: select the position source. If you do not have a GPS device, Network based could be a choice, but please note that this requires an Internet connection and initiates a connection each 30 seconds, so a flat rate is recommended.
Always on: prevent the phone from going into standby mode (to switch off the screen).
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Other Software by developer «Viking Informatics Ltd»:
AnchorAlert AnchorAlert checks how far your vessel has drifted from its anchor point and sounds an alarm when the value exceeds the specified distance.
USAGE
Start the application, that will automatically connect to the predefined GPS (see Settings). You will see your latitude/longitude on the
main screen after GPS has a fix position
DVDPlayer DVDPlayer - Play movies, videos fullscreen on your phone, with many features like fast forward and backward
CellPos Records the position of gsm cells automatically using a Bluetooth-capable GPS receiver
DVDPlayer for Nokia Communicator DVDPlayer for Nokia Communicator - Fullscreen playback of DivX/XviD AVI movies, e.g. ripped from your DVD movies.
Functions:
fullscreen playback, 65565 colors;
start at a user-defined position;
fast forward and backward.
Ripping DVD movies
If you want to play DVD movies, the first step is to rip the DVD into an AVI file using a DVD ripper program
DVDPlayer S90 Fullscreen playback of DivX/XviD AVI movies, e.g. ripped from your DVD movies.
Functions:
fullscreen playback, 65565 colors;
start at a user-defined position;
fast forward and backward.
Ripping DVD movies
If you want to play DVD movies, the first step is to rip the DVD into an AVI file using a DVD ripper program
Wall Wall - Wall is traditional breakout game.
Gameplay is simple, with the object being to get as high a score as possible without letting the ball fall to the floor. The game is made interesting by the use of different blocks and the use of different bonuses that are released when certain blocks are destroyed.
Wall is shareware
WifiRadar WifiRadar - displays nearby access points on a cool animated radar screen - sounds an alarm when an available connection has been found, and displays it on the screen - lists nearby WLAN access point. MAIN SCREEN The main screen shows detected wifi networks
Mp3Player S60 Ultimate media player for listening to music, podcasts, audio books, supporting bookmarks and much more
