PowerSDHC - As you may be aware, most Palm devices that do not carry a "Treo" or "Centro" brand cannot read or write to the new SDHC cards. This leaves everyone owning such devices behind in terms of storage and costs. SD cards top out at 2GB, while SDHC cards are available at 32GB sizes already, and 16GB cards can be obtained for less than $80 USD.
Palm Inc has repeatedly refused to write an SDHC driver for their handhelds. This has long been regarded as a lost cause by most Palm owners. Luckily Palm Inc are not the only ones in power to help. PalmPowerups to the rescue! We've been hard at work creating an SDHC driver for your devices. It is very difficult and has been one of the most complex projects we've ever undertaken here. It is made harder yet since each individual device needs to be uniquely supported and programmed for.
Today we're glad to announce that for for a small set of devices the driver has entered beta testing. Due to huge demand to make the beta available to everyone, it has been decided that the beta will be available for purchase as well. It is more expensive than the final version will be, for reasons that are beyond the scope of this document. Internally we've been using it on our devices, and it works well, so we're reasonably confident that it will work for you too.
There are caveats of course. First, to use cards whose size is 4GB or over, your device needs to support the FAT32 filesystem. Only Palm LifeDrive and Palm TX ship with it included. All other devices will need to install a FAT32 driver. There is only one option for where to get one - Palm Inc. We here at PalmPowerups are currently investigating writing our own due to reasons mentioned later in this document. For now you may download our wrapper and installer for Palm's FAT32 driver. All you need to do is install it to RAM and reset. Your device will now support FAT32. Please note that Palm's FAT32 driver is VERY inefficient and slow when mounting cards. Thus on slower devices it can take up to 30 seconds to recognize an inserted 32GB card. This delay goes down for smaller cards, and when we release out own FAT32 driver, it will go away. Also this delay is not present on LifeDrive and TX devices. Another caveat, which is well known to our customers who purchase PowerDrive, is that PalmOS cannot display card sizes over 4GB or free space over 4GB. This does not mean it cannot use them, just that the display of card size and free space will be wrong. This is usually just a cosmetic error, and will usually not cause errors or problems. We are investigating a possibility of releasing a patch to alleviate this problem, but there is no certainty on this yet.
The following devices are next on the roadmap and should be supported soon:
* Tungsten E
* Tungsten C
* Tapwave Zodiac
* Tungsten T3
The process to get a trial version is simple. First you need to register a username on the PalmPowerups site. Then you need to download the trial version PRC file. Now run it. It will give you your device ID, which will be something like 2134CD6E. Write this down. Your device will now reset; this is normal. Now click here and fill in the required data. Please be very careful to fill it in correctly. when you do this, you will be given a link to download a keyfile. Download it and save it to a safe location, you will not be able to re-download it. You now need to install it to RAM of your device. Do so, and run PalmSDHC again. It will blink and return to the launcher screen. The SDHC driver is now active. Your device will get your attention and tell you about the trial expiration and limitations. You will have unrestricted access for 3-4 days, after which the driver will become read-only and speed-limited to a very low speed of 50 KB/s. At this point you may delete it and soft reset to remove it, or purchase it to get a new key file, that will not expire.
This is a beta version, so please report any bugs and problems you may have with it. Of course when the release version comes out, you will be entitled to the upgrade for free. The release version is coming later, and will cost $20 USD. Also note that for the beta, the driver must stay in ram, and you must run it after a soft reset to regain SDHC functionality. This is a precaution against driver conflicts.
As always we're not responsible for any data loss or any damage that may occur as result of using our software and all efforts are made to ensure it does not happen. Please read this document carefully before proceeding.
What's New in This Release:
· Fixed a serious bug. Delete older versions and update to avoid problems.
Like it? Share with your friends!
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Other Software by developer «PalmPowerups»:
MemUnfragment On OS 5.4.9 devices Blazer fragments the dynamic heap at startup, causing bad performance. This application will fix that
DriveMode Patch Allows DriveMode application from Palm to export more then 5 volumes to the PC
Card Size Card Size - For users of PowerDrive or PlmSDHC. PalmOS has a big issue where it will not report card size and free space correctly for cards over 4GB. This hack attempts to work around it, by trying to show how much free space there is up to 4GB, if more is free, 4GB is shown. To use this app, just install to ram and run once. The app will NOT activate after reset
LifeDrive CardInfo Patch Allows renaming of internal volumes and displaying of media types other then SD/MMC and "HardDisk"
Palm Movie Maker Palm Movie Maker - PalmOne, when releasing the Palm Zire 71 clearly said that it was not powerfull enough hardware-wise to record video, and of course this created quite an upstir in the Palm user community. Personally, this was the palm of my dreams, except for that problem, but I bought it anyways, becuse my old Sony N610C was dieing
FAT32 FAT32 - FAT32 driver for OS5 devices without it. Allows use of 4GB cards on those devices
