Introduction
-------------------------------------------------
This program, PSP is a plug-in that runs on a custom firmware.
Sony Akira Makoto on normal firmware does not work.
It is routine, self-responsibility in any event.
Not to give anything to play and a prolonged failure to suddenly freeze.
Overview
-------------------------------------------------
Reassign the button, any button and set the batter,
Macro functions are performed automatically to certain operations.
Rensha settings, so that you can press to leave the state,
RPG and can be kind of a battle without the use of automatic rubber band and scheelite.
Macro function is to record the specific behavior, you can repeat it.
The analog stick adjustment or re-assigned function,
You may be able to cover some of the analog sticks and broken loose button.
I do not work with 3.71M33.
Firmware does not work with less.
PSP-2000 and PSP-3000 because the activity does not have to know,
RAM does not use the extension.
Installation
-------------------------------------------------
The following files are included with the ms0: / seplugins copies.
macrofire.prx
macrofire.ini
Then, ms0: / seplugins in
vsh.txt
game.txt
pops.txt
Add the following in their path.
ms0: / seplugins / macrofire.prx
If these files do not exist, please create.
After going to write RIKABARIMODO, Plugins item
Where the plug-in needed to Enabled.
However, VSH on "Internet browser" in the works is limited, and macro functions Rensha function does not work.
This is to address the concerns that they were offensive to other sites that mock these capabilities,
We want to ease the restrictions and measures.
The sample configuration file folder remap the re-set button assignments,
Remap settings menu is actually read from the configuration file.
MacroFire to run, this folder is not required.
analog_to_dpad.ini key is assigned to cross the analog stick,
dpad_to_analog.ini assigns to cross key analog stick.
Usage
-------------------------------------------------
When you start the game, using the two volume buttons (+ and - keys) and then by pressing the Start menu.
This button can be changed in the configuration file.
See below "configuration file" please refer to the item.
The basic key is the following menu.
↑ ↓: Move items
← →: Change Option
○ button: the decision of the items
e button: Back
START button: exit immediately Menu
This is a typical operation, the functions of other items,
May have another operation.
In this case, may have been written about how to manipulate the screen under each key.
Functions
-------------------------------------------------
MacroFire Engine
Or switch to activate this plugin.
Roll button and macro functions and features will affect all functions.
OFF immediately after the game starts it is, if you use the cross using the key switch to ON.
You can set the initial state in the configuration file.
Buttons to launch the menu
MacroFire game set in the button to display the menu.
The menu button you want to see here is set to ON, by pressing a button combination in the game,
MacroFire can display the menu.
You can set the initial state in the configuration file.
Buttons to toggle the engine state
MacroFire Engine without a menu ON / OFF button to switch between sets.
The button where you want to use the switch is set to ON, by pressing a button combination in the game,
If the MacroFire Engine OFF to ON, OFF ON switch to it.
You can set the initial state in the configuration file.
Tuning the analog stick sensitivity
Position and sensitivity of the analog stick to set the dead zone.
Details are included manual_analogsens.txt please
Remap settings
Set the re-allocation.
Details are included manual_remap.txt please.
Rapidfire settings
Sets of automatic fire.
Details are included manual_rapidfire.txt please.
Macro settings
And will run the macro function.
Details are included manual_macro.txt please.
Configuration file
-------------------------------------------------
Macrofire.ini and preferences,
Rensha configuration file, the macro file format is the same with the exception of some.
For more information, please see the included manual_ini.txt.
Work order
-------------------------------------------------
Adjust the analog stick, re-assign button, burst, macro,
These functions are handled by the order from the menu in a row.
In other words, after the re-allocation adjustment buttons and analog sticks,
Rensha processing, the results of macro-blazing after the treatment is used.
For example, in re-assign button, ○ e button □ button and then press the button simultaneously,
Settings button and automatic fire from e □ RAPID to the mode button,
○ at the push of a button, e □ is blazing a button and two buttons.
Known issues
-------------------------------------------------
- Back to the game screen to exit the menu screen is distorted for a moment.
- "Portable SSHO regionally everyday" burst mode, why does "RAPID" does not work.
"AUTO-RAPID" is to work.
To look at the press of a button on the left by way of something like that is a priority there.
Further cause is unknown.
Specifications
-------------------------------------------------
- Displaying the contents of the menu screen LCD (liquid crystal display) and the extent to leave off automatically,
Reflected a split second after the game at the end of the menu, it may be left to degenerate quickly.
In this case, if the game BGM, but a black screen as well BGM keeps ringing,
If there is no BGM, so careful to stay on the line power seems to freeze on the surface.
If you are in this state, PSP can resolve the brightness by pressing the Change button.
- The menu in the middle of a file access,
Will leave access lamp blinks and Memory Stick.
However, it seems that the visit has been really, is not particularly harmful.
However, when the state is to fetch a list of files,
Save the settings and macro Rensha / time out to run a load.
If the timeout is returned to the game once, and may try again later.
- Too bad English.
Not limited control.
Future Plans
-------------------------------------------------
- To switch settings for each game to load at startup.
- Remap settings to be more easy to use interface.
- Save the file / RODODAIAROGU,
To make the operation a little more about the files.
- Organize the code.
Finally
-------------------------------------------------
Although often seen with a light, plug-in is not a formal mechanism,
PSP games to work on is not considering the presence of plug-in.
Therefore, do not forget the game that always precariously freeze.
The game can be saved to save the行IMASHOU frequently.
Acknowledgments
-------------------------------------------------
This software, PSPLink has benefited greatly from the source code.
If you do not have this software and this is difficult.
And if there is no PSPSDK custom firmware, and there was such a development in itself.
Thank you take this opportunity.
Thanks all the developers of the PSPSDK, the PSPLink and the CFW.
If you got an error while installing Themes, Software or Games, please, read FAQ.
Similar Software:
X-Flash X-FlashWasn't it just a few days ago when Art released v16b of the application X-Flash? As it is in fact just three days ago, it seemed so outdated already when Art dropped by again today with a new version complete with several improvements
Easy Homebrew Downloader Easy Homebrew Downloader
Coder Poison_xtreamlua just released a new build for the useful program Easy Homebrew Downloader (EHD) over at QJ.NET PSP Development Forum. This helps users to download and install some of the current homebrew games and applications out there to date
XGEN UPDATER DC + UPDATER + testing tool XGEN UPDATER DC + UPDATER + testing tool from Yoshihiro:
This tool let you install the firmware 5.50 GEN-B2 Full directly without any patch
and on any psp so PSP fat and psp slim TA-79 > TA-88V2 from any custom firmware or kernel exploit .
for the firmware 5.50 put your 5.50 updater on root of your memory stick renamed 550.PBP
GoblinPSP GoblinPSP
Moscas user of our forum, issuing GoblinPSP, PC program from a variety of functions.
GoblinPSP there will indeed carry out operations to back up the data on your memory stick, load and / or delete your backup UMD and also to launch programs like RemoteJoy and USBIsolader
aLoader aLoader
aLoader is an ISO loader developed by ardi for use with 6.20 TN-HEN.
Changelog:
Fixed some bugs (do not remember exactly what)
ISO Tool Launcher is no longer used. Now use your own
PSPident PSP coder Yoti is back in the homebrew scene to release a new version of PSPident, a handy homebrew application, originally coded by jas0nuk, that identifies the model of your handheld and displays all the necessary info about your PSP's motherboard
2.71 SE-C Custom Firmware 2.71 SE-C Custom Firmware
Just a few short minutes after releasing HEN D, Dark_AleX has just released 2.71 SE-C Custom Firmware, the update to the new golden firmware
PSPident Homebrew developer Yoti has recently updated PSPident, a handy homebrew tool that provides a handful of information about your handheld and and displays all the necessary info about your PSP's motherboard
DevHook Firmware Installer DevHook Firmware Installer
Ah, DevHook. Just the sheer mention of it sends shivers down the spine. So, you can just imagine our joy (and we're enjoying yours now) when homebrew coder Sleepy566 dropped by QJ Forums and informed us about an updated version of Tommydanger-original DevHook Firmware Installer.
In the last version, v0
Custom Firmware Extender 3.0 Custom Firmware Extender 3.0 From the readme:
========================= =======
CUSTOM FIRMWARE EXTENDER 3.0
========================= =======
CFE 3.0 IS FOR PSP SLIM ONLY. TESTED ON CFW 5.00, SHOULD WORK ON CFW 4.01
"Custom Firmware Extender" is a set of plugins that will add some extra options to your SONY PSP.
With "cfe "3
Comments on MacroFire 2.4.1:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Please, select device to check if MacroFire 2.4.1 supports it
