PDServo is a linear math model of a proportional/psuedo derivative control system. This means that the feed forward compensation is proportional and the feedback compensation is both proportional and differential. This is most common in electric motor servos with tachometer as well as potentiometer feedback. This model, being linear, applies mostly to small signal stability analysis. Large command inputs will usually saturate current limits, which would greatly affect overall performance. Also, non linearity's such as coulombic and static friction as well as backlash are not included, which can also significantly influence performance. This program is useful as a first cut design/analysis of a servo system, which will later be enhanced with nonlinear simulation/analysis.
To use PD Servo first initialize all the physical parameters taking care to use consistent units. I edit the file using the edit option of the main keys of MtrxCal. Then define the period and frequency ranges and their increments. This will most likely take several iterations to get the best combination. Then switch to matrix keys and execute the program. If all parameters are properly defined, a graph of the gain will appear. Tap the screen and the phase plot will appear. Tap again and the step response will be plotted. Finally, after another tap, a list of computed performance parameters will appear such as the natural frequency, resonance frequency, damping ratio, time constant and settling time.
Like it? Share with your friends!
Supported operating systems:
Palm OS 4.x, Palm OS 5.x
Similar Software:
EasyCalcPro EasyCalcPro - A very simple calculator. Enter a list of up to 30 numbers and labels. Keep your calculations secret.
· Enter up to 30 numbers with labels
· Use a password to encrypt labels and values.
· 13 Exchange rates
SciCalc by Jenkins SciCalc by Jenkins features decimal, binary and hexadecimal display (with unique scrolling display for binary output), common mathematical formulae and engineering conversion routines as well as all common trigonometric, logarithmic and memory functions
DonCal (DA) DonCal (DA) is a simple, colorful and small 8 digit DA calculator (DA = Desk Accessories) and is not a hack and therefore doesn't need Teal Master or X-Master.
DA's are little applications that you launch while you're in another application
FormulaCalc (Palm OS) FormulaCalc (Palm OS) - FormulaCalc is a general purpose calculator which accepts algebraic formulas and computes their values.
The formulas:
* Use common algebraic expressions with the normal multiply before add rules.
* Can have up to 26 inputs from stored data.
* Can store results in up to 26 storage locations
SoftBase Parser SoftBase Parser - enables you to evaluate easily any kind of mathematical functions.
You can use up to 6 function parameters named x, y, z, u, v, w.
Furthermore it is possible to change the base of the input and output value (e.g. binary or hexadecimal) and the angular unit (e.g. degree).
Example:
Set function to
-sin(x*cos(x))^(1/x)
and x to the value
0
DensCalc DensCalc is a sea water equation of state calculator for the Palm OS.
It will compute any two of the following four parameters: temperature, conductivity, salinity, and density, from the other two parameters and it will do this for any depth in the ocean
Coconut Free Edition Coconut Free Edition - Coconut emulates the programmable, scientific Hewlett-Packard HP-41CX calculator on your Palm.
With Coconut you get:
The full power of the standard calculator for professionals, sold more than 1.8 million times.
The original look-and-feel of the HP-41CX, adaptable to all grayscale/color levels supported by your Palm device
Stato Statistic calculator (statistic result, scartterplot, individuals chart,Histogramm,Moving Average,CuSum chart...)
PercentCalc PercentCalc - Percentage calculator:
# Percentage Increase
Returns to Formula
A + X% = B (or A-X% = B)
The third value when the other two values are known.
# Relationship Equation
Returns to Formula
A: 100% = B: X%.
The third value when the other two values are known
Maths Maths is a Graphical Enhanced Calculator with up to 15 decimal places, trigonometric, hyperbolic, exponential functions and much more... Very light (28k), simple to use and very accurate. It can solve equations for you. To see how it works, visit Maths page at http://all
Other Software by developer «ADACS»:
PDAcalc matrix (PocketPC) PDAcalc matrix (PocketPC) - Use this calculator for your basic and linear algebra calculations. Using matrices allows you to perform far more powerful calculations with less instructions. Instead of using one value at the time use a matrix or vector containing hundreds of values. Features:
Uses same syntax as high-end mathematical programs like matlab
Left right intergration This program was used for a MAT 220 Calculus I class to compute left and right approximations of an intergral from A to B
ThinkDB2 CplxCalPro functions ThinkDB2 CplxCalPro functions - this database contains the description of all CplxCalPro functions, version 3.01
PDAcalc units (PocketPC) PDAcalc units (PocketPC) is a conversion calculator that can quickly and easy translate different units of measure. It can translate days into seconds, Celsius into Fahrenheit, foreign currency into domestic currency, how many gallons a container of certain dimensions can hold, and much much more
Chained reactions (CplxCalPro) Chained reactions (CplxCalPro) - The present document has been written as an introduction to the emulation of successive chained biochemical reactions with the CplxCalPro graphical calculator on a Palm platform.
The law which, in this instance, was assumed to link the variables is similar to other ones found in various fields of human knowledge
