Categories: Internet & Communications, System Utilities, Travel & Navigation
Upload date: 17 Jun 11
Developer: James Larry Gaines
License: Freeware
Downloads: 1427 File Size: 370 Kb
SmartProtect helps you track and recover your phone once stolen or lost.
Features includes:
1. A Thief or Lost Prevention Software with SMS Auto-Responder and GPS Capability created for Windows Mobile Devices.
2. When you forget your phone and can''t remember where you put it, you can SMS your phone to get the exact location via GPS information if your phone has GPS Capability or approximate location based on Cell Location.
3. You can SMS your phone for other information such as IMSI, IMEI or even remotely reboot your phone etc.
4. This software is also equipped with Thief Prevention system which will automatically SMS your partner phone number if the SIM has been changed against the registered SIM.
5. This software supports registration of Multiple SIM Cards and of Multiple Phone Conctacts as Partners.
6. When your phone has been stolen, it will automatically SMS relevant information such as IMEI, SIM Card Number or IMSI, GPS Location if supported or Cell Location.
7. It is able to also auto-delete Phone Memory Contacts if the phone has been stolen.
8. It is password protected and the password is encrypted with AES-Encryption.
9. Its un-install proof. It requires special procedure to uninstall the protection, so even if you uninstall it, it is still working.
10. It has MortScript support.
Note that Cell Location depends on your device. It should be working but the problem is not all devices interfaces with RIL functionality so it may or may not work.
For testing, kindly use Emulation Mode to determine if the application will work on your phone before using these features:
1. Make Phone Unusable
2. Protected Folders
3. Delete Contacts on SIM Change
Emulation mode will run the protection, however on test mode only and not real mode. Therefore, it will just produce a log file to tell you of the action it is supposed to make (however since its a test mode, it does not do that action). If everything is fine, make sure that after testing, to disable the emulation mode.
This software also can accept SMS Commands from the partner phone so that it can return informations as commanded by you explicitly. Here are the SMS Commands that you can send. Note though that the SMS is only accepted when :
1. The SMS came from a partner phone. (You need to register the phone as a partner phone first).
2. The password is correct. Password is based on the password that you have saved when you configure SmartProtect on your phone. The password is authenticated by the phone once the SMS Command is received.
3. When the SMS Command is correct.
The SMS commands syntax is:
::/[command],[password]
example :
::/getGPSLocation,mypassword
Available Commands are:
getIMEI - Retrieves the IMEI Number
lockMyPhone - makes your phone unusable
enableLockPhone - Enable the Lock Mechanism of your Phone. When your phone is stolen, your phone will become unusable.
rebootPhone - Reboots your phone.
deleteContacts -Deletes your mobile phone contacts. It does not delete the SIM Card Contacts.
unregisterPhone - Unregisters the sender as a partner phone.
disableSecurity - Disables the security mechanism of your phone. This requires restart to take effect.
enableSecurity - Enables the security mechanism of your phone.This requires restart to take effect.
getIMSI - Retrieves the IMSI Number.
alertContacts - alerts your contacts that your phone has been stolen.
getCellLocation - Gets the approximate location based on Cell Tower that your phone has registered to.
getGPSLocation - Retrieves the GPS Coordinates.
exitApp - When you use getGPSLocation command, this application stays in the memory. This command exits the application. However, this applications will still be activated if any of the command is received.
registerPhone - Registers your sender as partner phone number.
listCommands - List the commands available for the Software.
versionInfo - Retrieves the current version of the SmartProtect.
deleteProtectedFolders - Removes the protected folders.
disableEmulation - Disabled the emulation mode.
stopAlert- Stops the alertContacts action.
stopAlert- Stops the alertContacts action.
runPreScript- Runs the pre-action MortScript you've defined.
runPostSCript- Runs the post-action MortScript you've defined.
runAllScripts- Runs all the MortScripts you've defined.
Please follow the procedure below to update the software:
1. From the partner phone. SMS your phone with the command ::/exitApp,[password]. This is to make sure that the SMS module is not loaded in the memory or update may fail.
2. Uninstall the SmartProtect. (optional)
3. Install the latest SmartProtect. If you didnt uninstall SmartProtect, it will ask you if you want to uninstall the older SmartProtect. Just click.
4. Once installed, Run SmartProtect to verify that your settings is still there.
5. Once verified, click either exit or save.
6. You will be notified that there's a need to restart the phone. Proceed to restart.
7. To verify its installed, SMS your phone with ::/versionInfo,< password >. This should yield the latest version.
Please follow the procedure below to remove the software:
1. Uninstall SmartProtect from your Mobile Phone.
2. From the partner phone. SMS your phone with the command ::/exitApp,[password]. This is to make sure that the SMS module is not loaded in the memory or update may fail.
3. Install SmartProtectRemove.CAB to your mobile phone.
3. Run the SmartProtectRemove
4. Enter the appropriate password you've configured for SmartProtect. Click on Remove SmartProtect.
5. Reboot/soft reset your phone.
6. To verify that it has been removed, SMS any commands to your phone. It should get thru now.
THOSE WITH SMS MODULE OF SMARTPROTECT NOT WORKING
Kindly run SmartProtect on Emulation Mode and test by sending SMS commands. The emulation mode works for all commands except for disableemulation, versioninfo and listcommands. Then the resulting log, kindly send to me for debugging purposes. Note that in emulation mode, no SMS will be sent out and all actions are recorded on the log file
What's New in This Release:
· Removed Debug Statements.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
SmsStatusbar SmsStatusbar - SmsStatusbar is a SMS sender that sends messages via contact cards. The app allows you to manage .sms files in a file explorer interface and share them via bluetooth.
After tapping on the .sms link, you will be able to compose a SMS to the person. The message will be logged in the archive for the file. Logs can be exported to text or csv files
SMS Tweaker Application for changing the default SMS mode to Threaded mode
phoneAlarm Pro (Pocket PC) phoneAlarm is a Today Screen plugin providing repeating alarms when Email/SMS, missed calls, or voice mail is waiting or when the phone signal or battery is too weak.
· Provides repeating alarms and escalating sound on new SMS/Email, missed calls & voice messages
· 7 Custom Phone profiles with manual / time-based automatic switching
Update for HTC HD2 - New SMS Function Update 2010-01-24 This update for HTC HD2 messaging lets you reach out to your friends and family with instant notifications. Keeping in touch has always been very important, and this update delivers just that: fast and reliable SMS messaging.
Copy the update, which is an .exe file, to your device. To install the update, tap the .exe file and follow the on-screen instructions
SMSTimings SMSTimings - allows you to give your contact information and contact 'time zone' via SMS. Set your contact information and time range in the settings box. When someone wants to know your email address enter their phone number and tap the button to send it via SMS
SMS Announcer (WM5/WM6) SMS Announcer (WM5/WM6) - Ever wanted to send Personalized Text Messages (SMS) with similar content to every contact from your Pocket PC?
Now Send SMS using SMS Announcer which helps you to send personalized text messages to each of your recipients with Template Fields
QDz (Picture Contact Dialer + Mailer) QDz (Picture Contact Dialer + Mailer) - QDz is a simple application for Contact.
- Phone call
- Mail (SMS, Outlook E-mail, Hotmail, MMS, POP3)
- Camera
Operation:
5 navigation buttons :
(1) Move to left tab
(2) Move to right tab
(3) Move to upper contact list.
(4) Move to lower contact list.
(5) Select and show contact detail.
Keyboad :
'A' - 'Z' .
SmsStatuser SmsStatuser - SmsStatuser allows you to update a preset SMS contact of your current status with a few taps. Set your contact SMS number in the options. Select the status type, location and any notes. When you tap the button the program will send a SMS with your current status
rk-SMS Switch rk-SMS Switch - This application can trigger a command line based on the SMS received. Built upon the idea of 'Push LIKE mail' where the device gets the SMS notification on 'New mail' from your email service. rk-SMS Switch intercepts the SMS and based on the SMS sender and/or message text executes the command line (such as /Windows/tmail.exe) to synchronize the emails
FNSuite FN Suite for Windows Mobile 5 and 6 by Faber Nitor
SIM Change SMS alert
Send SMS to lock/unlock phone
wipe all data
delete callogs/contacts/images/videos/sounds/sms/email
Remote Data Deletion by SMS
Any unauthorised sim card change will trigger a secret text message to your alternative mobile number
Other Software by developer «James Larry Gaines»:
not found
Comments on SmartProtect:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
SmartProtect is compatible with your device Acer Tempo F900
