Ep Detect is an accelerometer based mobile phone application that uses advanced signal processing to detect epileptic seizures. It runs on most mobile phones that support SMS messaging, movement detection and GPS position location.
The addition of the seizure detection signal processing enables the phone to function as a wearable seizure detection system, with remote signalling to carers. Epdetect monitors the wearers movements, distinguishing between normal movement and movement associated with a Tonic–clonic seizure. If a seizure is detected, Epdetect will contact your carer with your status and GPS position.
Epdetect will monitor the movement of the person while the phone is in their pocket or worn on a belt. The software will differentiate the movements associated with epilepsy from normal movement.
When a seizure is detected it will warn the person that it is about to send an SMS message to a carer, in the case of a false alarm the person will be able to cancel the SMS alert. The SMS message contains time, GPS coordinates (if the phone has GPS) and a short message, allowing the carer to raise the alarm and take remedial action or call an ambulance. When the person recovers they press a button to cancel the alarm, which will initiate an end of emergency SMS message.
The Epdetect user interface screens:
* Status Message – A "Seizure Detected – press the clear button for 5 seconds to cancel" message will be displayed.
* Audible Alarm – An audible alarm will sound immediately upon detection of a seizure.
* Count Down Timer – A countdown from 30 seconds will be displayed to enable the user to press the cancel button prior to sending the outgoing SMS alert. The countdown timer is adjustable from 1- 60 seconds.
* Clear Button – A large "clear" button graphic is displayed to allow the user to clear the detector active status, which also cancels any outgoing SMS alert. The "clear" button must be pressed for 5 seconds within 30 seconds to prevent the outgoing SMS message.
Alarm Active Screen:
* Status Message – A "Seizure In Progress – press the cancel button for 5 seconds to signal the end of a seizure" message is displayed.
* Audible Alarm – A second audible alarm will continue to play until the alarm active status is cleared.
* Cancel Button – A large "cancel" button graphic is displayed to allow the user to clear the alarm status, which also causes an end of seizure SMS message to be sent. The "cancel" button must be pressed for 5 seconds to cancel the alarm active status.
* Additional Message – A message saying |This person may be having an epileptic fit" will be displayed on screen.
Advanced Options Screen:
* Back-Up Accelerometer Data – Tick box, which if ticked saves the raw accelerometer data that caused the last alarm condition to a file.
* GPS On/Off – Tick box, which if ticked activates the phone’s GPS to generate location information, which is appended to SMS messages.
* Carer No 1 – The mobile phone number of the first carer, this number will receive an SMS message if an alarm condition is active.
* Carer No 2 – Optional, the mobile phone number of the second carer, this number will receive an SMS message if an alarm condition is active.
* Carer No 3 – Optional, the mobile phone number of the third carer, this number will receive an SMS message if an alarm condition is active.
* Alarm Message – The SMS message that will be sent when an alarm is active.
* Cancel Alarm Message – The SMS message that will be sent when an alarm is cleared.
* Detector Active Sound – Selects the warning sound to play when the detector is active.
* Alarm Active Sound – Selects the sound to play when the alarm has not been cancelled (could be an audio file such as; "Help this person is having an epileptic seizure").
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
ProgressSmoke ProgressSmoke is an app that can help you quit smoking. Simply enter the maximum number of cigarettes you can smoke per day and each time you smoke tap the button. Each day reduce your number of cigarettes by one. You can view your day via the graphical progress bar
GlucoseFacebook GlucoseFacebook allows you to to log your Glucose readings to your Facebook 'My Notes' folder. Each time you take a reading enter the reading value and type and any text notes. When you tap on 'Upload Reading' the program will update your FaceBook 'My Notes'. Your Doctor/Nurse can use the PocketPC GlucoseFacebooks to view your logs. This service is provided by FaceBook
MicrophoneRespiration MicrophoneRespiration - can be used to graphically view a persons breathing via sound decibel. Simply have the patient breath in front of the microphone of the PocketPC. The program monitors the sound and when the sound level is over the pre-set setting (exhaling) the program will power on the microphone
SmokeRandomizer SmokeRandomizer - This program can be used to help you to quit smoking. Select the number of times you smoke for a time period and tap the button to create a 'random' schedule.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
DrinkWater DrinkWater - This program can be used to prevent a hangover. Tap the joypad each time you have a drink. Before you sleep drink the equal amount of water.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
NotificationSmoke NotificationSmoke is a simple time span quit smoking method. Each time you use the program increase the number of minutes between each time you smoke. The program displays a chart of the times when you can smoke. NOTE: The program runs in the background and only alerts you when the device is powered on
ContractionTimer ContractionTimer - This program allows you to time contractions and allows you to view and save the log in Pocket Word.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
DepressionTest DepressionTest - This program can be used to find out if a patient has any symptoms of depression. The program is based on a online questionnaire at www.psychcentral.com/depquiz.htm
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
DrinkFTPeds DrinkFTPeds - DrinkFTPeds allows you to use a secure FTP server to track the drinkers that are using the PocketPC DrinkFTPer. The program logs into the FTP server and downloads each drinkers logs in real time.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
SmokeTemplate SmokeTemplate - This program allows you to enter the total maximum number of smokes you will smoke for a time period. Then it generates a text template of the times when you can smoke.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
Comments on Ep Detect:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Ep Detect is compatible with your device Alcatel OT-S988W
