DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Beautiful Island Lock Screen Beautiful Island Lock Screen
Get it now!
So awesome!
So pretty!
Best lockscreen ever!
Disco Flash Light Full of Fun and Entertainment Disco Flash Light App will change the screen of your Smart Phone's, Tablet's into a Colorful, Spark winkle, Blinking, Light free App, that would be a different Multiple colors with multiple shining blinking sparkling stars, Blinking glow Dots lines
Flashlight + LED Flashlight + LED - The Flashlight application is a very easy to use and super fast application that converts your Android phone into a handy flashlight either using screen or camera led as a torch (camera led is not present in most devices)
Screen Tester Screen Tester - If you are interested in the health of the screen of your device, here is the application you were waiting.
You can check if your screen has flaws and if the touch screen works perfectly.
Finally you can clarify your doubts, so if you see strange defects in the image, you'll know if it's the screen or otherwise
Strobe Light Strobe Light - Simply an amazing Strobe Light for your Android! Uses your mobile phone's camera flash to simulate a strobe light effect. Never be caught at a rave without it!
Picture this. You are having a party at your house. The cute girl from your biology class is there. Suddenly your bro says 'Hey let's turn this into a rave!' Biology girl is feeling it
Tiny Flashlight + LED Incredibly simple and yet very useful flashlight application. Will use your device's LED if it has one.Note: Your widget may disappear when the app is installed on the SD Card. This is a bug in Android 2.2
No LED No LED - some models of smartphones have no LED indicator which notifies about the missed call, sms or other notifications. Having installed this application you can adjust the reflection of missed events represented as colored elements which will stand for indicators and move on the blocked screen
Smart AppLock : App Protector Smart AppLock : App ProtectorBest and Smart Application Lock for Your Android Phone. This is Easy and Free to Use. Safe your Mobile Apps with this Smart AppLock
Other Software by developer «leppie»:
not found
Comments on DHD Proximity Sensor Recalibrator:
papa beat:
I hope it wprks
Date: 9 Oct 12
HKG:
This app doesnt work with Sony Ericsson Arc S. Error: "Kernel not supported" -ps_kadc not found.
Date: 9 Nov 12
anil:
sensor
Date: 10 Dec 12
Jawad:
his app doesn't work with sky vega a830L Error: "Kernel not supported" -ps_kadc not found.
Date: 30 Apr 13
jpmurf:
Doesn't work on LG G2 D800 "Kernel not supported" -ps_kadc not found.
Date: 5 Aug 14
deepak:
in lava xolo a600 "Kernel not supported" -ps_kadc not found. same issue
Date: 7 Dec 16
If you noted an error or download link is broken, please, report it via this page or use comments.
DHD Proximity Sensor Recalibrator is compatible with your device Altek Leo A14
