Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
TouchResponse TouchResponse - This program is a touch driver to handle the touchscreen presses and vibration. TouchResponse will vibrate on touch.
A settings program exists to configure how the vibration works. Since this is a touch driver, there is no program you need to run to start it
CurtainCall CurtainCall - new pocket pc software screen locker for Windows Mobile.
CurtainCall features:
* Battery Meter
* Tasks current / overdue
* Scratch Caller Picture to answer and ignore incoming calls (Scratch down 50% to answer scratch horizontal 50% to send to voicemail
Mobile FlashLight Mobile FlashLight - Many people today carry mini-flashlights on the end of their key chain. Apparently there is a need for this type of device because many stores sell them near the cash registers in the checkout lines. I wonder why these mini-flashlights are so popular when almost everyone has a mobile phone today
LEDLuxLevel LEDLuxLevel is a LED flashlight that automatically turns on when you are in the dark and off again when the light sensor is exposed to light. Simply tap the button to start/stop the sensor. It works on Samsung Omnia Lite, Omnia Pro, Armani, Omnia II, SCH i920, Omnia II, TOmnia II, Jack, Intrepid and Oz Omnia
Slide2Unlock Pro Slide2Unlock Pro is a simple lock/unlock application which has the iPhone style slide unlocking. It can be used as a screensaver while you don't use your device.
- Slide2Unlock Pro is a freeware, you can use it without any charge, however, you can donate to motivate me to add more powerful features.
V1.05 (Feb
CEBeans FlashLight CEBeans FlashLight - This program converts your Pocket PC into a flashlight.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
Force High Resolution Force High Resolution - Many applications display poorly on Pocket PC VGA as they don't support VGA mode, but use "double pixelisation". There's a work-around for this problem without having to go to "Full VGA" (as SE_VGA and OzVGA do). But this requires adding a little file next to each specific executable
TouchLockPro TouchLockPro is designed not to interfere with running applications and is a multipurpose locking application. Other locking solutions are often specific for locking only incoming calls/SMS. A lot of locking solutions also place a (transparent looking) Window on top of the running application (e.g
Kai's Flash Light.Net Kai's Flash Light.Net - Use your Pocket PC as a flashlight. You can use the whole brightness of the screen, set color, choose from different lamps and let it blink
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device AnexTEK moboDA 3160
