AutoBacklight for HP iPaq 415x PPC - HP iPaq 415x is a great Pocket PC, but its backlight control system doesn''t support backlight brightness change automatically when connected to (or disconnected from) AC power (charging). Most of the other HP iPaq PPCs have this feature though.
This AutoBacklight utility solves the problem. It will set the backlight brightness to the highest when a 415x is connected to the charger (and charging). The backlight brightness will turn to normal (the default setting) automatically when charger is disconnected.
AutoBacklight is a very small program which takes less than 8kb memory. It works for HP iPaq 415x PPC only. There is no UI or whatsoever. Just run AutoBacklight once to enable it. Run again to disable it (if you choose to).
Installation and user guide:
1. Download the AutoBacklight zip file, copy the cab file to your PPC then install (with any file explorer)
Note: two shortcuts will be created automatically. One is under WindowsStart MenuPrograms, the other is under WindowsStartUp (to enable AutoBacklight after a reset).
2. Run AutoBacklight (by clicking on any of the above shortcuts). Now if your PPC is charging, the screen backlight will turn to full brightness (in a couple of seconds).
3. To disable auto backlight, just run AutoBacklight again and confirm the action (click on the "Yes" button). The backlight brighness will be turned to normal when AutoBacklight is disabled.
4. Uninstall: you''ll have to disable AutoBacklight before you can uninstall it.
AutoBacklight is FREE.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 2003
Similar Software:
QWERTY Backlight Timeout Changer QWERTY Backlight Timeout Changer - On many of the Windows Mobile devices with hardware keyboard there is no way to adjust the backlight on the keys to your liking. This little application lets you set the timeout to whatever you want
RotateSE270 .NET RotateSE270 .NET - This little program rotates the screen on Windows Mobile 2003 SE devices in 270 degrees. Its perfect to be used in Today Screen Launchers.
THIS TOOL IS FOR WINDOWS MOBILE 2003 SECOND EDITION, PLEASE READ THE REQUIREMENTS BEFORE YOU WRITE A REVIEW SAYING THAT THIS DOES NOT WORK IN ANY OTHER OPERATING SYSTEM
Torche Torche - When you have need to make a light open this program and with a simple click your camera FLASH is ON!!!! It's very important to have this program... In this installation install the program in folder Windows/Torche. In this folder you find another file "dllSAMSUNG", you must install also this file..
Extended Control Extended Control - Pocket PC Control Panel settings are notoriously difficult to access. Extended Control puts configurable icons on your today screen which provide direct access to frequently used settings.
In addition, there's a running display of used program memory, storage memory and battery strength percentages
PocketForce PocketForce - PocketForce is an application that turns your PocketPC (Compaq iPAQ in particular) into a $500 flashlight.
It fills up the display with white color and turns the backlight to the maximum brightness setting (iPAQ only). Tap on the display to turn it into a black mirror
VJCandela VJCandela - Turn you phone into a super bright torch!
This program is used to permit control of the flash light on the Universal family of HTC Phones, to allow it to be used as a torch etc.
Note: this may cause damage to your hardware over prolonged periods! I don't see why it should, but use at your own risk
TouchLockPro TouchLockPro is designed not to interfere with running applications and is a multipurpose locking application. Other locking solutions are often specific for locking only incoming calls/SMS. A lot of locking solutions also place a (transparent looking) Window on top of the running application (e.g
PowerOptions PowerOptions is a software for HTC devices that allows you to easily soft reset, shut down, turn off backlight and put the device into standby mode.
A high priority was to use only "safe" functions, which will not harm the device. The shutdown method for one is the same HTC uses
Screen Alive Screen Alive is a simple application that easily and temporarily overrides your screen power settings so that the screen will not dim or shut off while Screen Alive is running
Other Software by developer «fengwei»:
HardReset for Pocket PC HardReset for Pocket PC is a tiny but handy utility which does nothing but does a hard reset for your PPC. Just like you do a hard reset by pressing those combination keys (quite difficult sometimes). You can put it on your Today Screen so you don''t need to press on those combination keys each time you do a hard reset
SoftReset for Pocket PC SoftReset for Pocket PC is a tiny but handy utility which does nothing but does a soft reset for your PPC. Just like you press on the soft reset hole (or button). You can put it on your Today Screen so you don''t need to press on the soft reset hole/button each time you do a soft reset. Just simply press on the SoftReset icon (wherever you put it)
ScreenLock for Pocket PC ScreenLock for Pocket PC is a very small and handy tool to turn off a PPC's display, and lock all the hardware keys, including power button. It'll keep your PPC alive even without any program running. It'll help you to save battery power while streaming or downloading big files, or playing music
ScreenToggle for Pocket PC ScreenToggle for Pocket PC is a tiny but handy utility which does nothing but turns ON or OFF the PPC's display.
Run once, it'll turn off the display. Run again, it'll turn off the display.
Use this tool to preserve battery power, yet still keeping it alive to let it continue processing.
Especially useful when playing MP3 or streaming the net on your PPC
PowerOff for Pocket PC PowerOff for Pocket PC is a tiny but handy utility which does nothing but turns OFF your PPC. Just like you press on the Power Button. You can put it on your Today Screen so you don't need to press on the Power Button to turn off your PPC. Just simply press on the PowerOff icon (wherever you put it)
BatteryTime (Today Plugin) for Pocket PC BatteryTime (Today Plugin) for Pocket PC is a small Today Screen plugin which monitors battery's uptime since last charge and displays the current battery charge percentage on PPC's Today Screen.
There is no option or whatsoever. Just install and your battery will be monitored. When the PPC is connected to a charger, the uptime will be reset to zero
