VJTrayLaunch - This program is used to launch any application from the Today Tray.
VJTrayLaunch is only for launching a small number of apps. Don't use it for 15 etc (due to the 32 task limit on WM).
This is a command line application, and can be used to launch any program or shortcut.
Note at this time you cannot use command line parameters for launched programs, although you can make a shortcut and launch that directly.
example usage. Create a shortcut with the following parameters:
"/program files/vijay555/vjtraylaunch/VJTrayLaunch.exe" /windows/notes.exe
This will place an icon in your Today tray to launch the Notes application.
Press and hold on the icon to show a menu to unload the icon.
After installation you will find two example shortcuts in StartMenu > Programs > Vijay555 > VJTrayLaunch
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0
Similar Software:
Manila Today Page (MTP) Manila Today Page (MTP) - This application displays Today plug-ins in one of the Manila pages.
Setup Instructions:
1) Setup MTPInstall.CAB to Main memory
2) Go to programs menu, run MTP Configurator.
3) Choose page to host plug-ins, choose plug-ins you want to enable. Uncheck "TouchFLO 3D".
4) Click apply button. Close configurator
Stayon Stayon - Stayon is an application that stops your Pocket PC from automatically turning off after a set time.
This can be useful when you want to keep looking at information (a form perhaps) for a longer time than is configurable
XCPUScalar 2007 (NEW) XCPUScalar 2007 (NEW) - New XCPUScalar 2007: NEW - TI OMAP processor support, Enhanced Auto scale, Wider Windows Mobile 5 support, Landscape, 240x240 screens. PXA270, PXA271, PXA272, PXA26x, PXA255 and PXA250 XScale processor support. Support for VGA Pocket PC's, Supports CPU speeds upto 728MHz and bus speeds upto 265MHz
SSnap SSnap - The program takes a snap-shot of the state of PPC that is useful for monitoring of changes on PPC, e.g. those made during installation of programs
Windows Media Player Mobile Playlist Maker Windows Media Player Mobile Playlist Maker - Generate .asx playlists for Windows Media Player mobile. Just select a folder, and the program creates playlist of all *.mp3 under the selected folder (including sub-folders).
No installation is needed, just copy the program to the wanted folder and run it
Update for HTC Diamond2 Power LED Notification Update for HTC Diamond2 Power LED Notification - This update for the HTC Diamond2 allows you to see the battery charging status right from the LED. Now enhanced to illuminate green when fully charged, with a quick look you will know when your device is powered and ready to go.
Copy the update, which is an .exe file, to your device. To install the update, tap the
EnumWindowsCe EnumWindowsCe - EnumWindowsCE is a type of TaskManager that lists the running programs on the Pocket PC. Simulating the function of the "Alt+Tab" of a Windows PC, it lets you jump from one program to another
TF3D Standby TF3D Standby - A tool which gets the mobile device into standby while running TF3D without the need for MortScript, S2U2 and so on. It monitors powerstates like S2U2 does and turns off or turns on TF3D which allows the device to go into standby.
What's New in This Release:
· Timeouts are now configurable via register
MS Console MS Console provides a console for application which need one
BAF MSL Grabber BAF MSL Grabber - BAF MSL Grabber is an application to quickly and painlessly give you the MSL code for any CDMA HTC device running Windows Mobile. It sure beats having to do manual hacking or trying to convince Sprint to give it to you over the phone. The MSL is the code you are required to enter to edit any of your radio parameters
Other Software by developer «Vijay555»:
VJSlippyPalm VJSlippyPalm - This is a support app for the the Palm Messaging App.
Once installed, you lose some access to the normal inbox, which you may still want.
Using VJSlippyPalm, you can assign the app to a hardware key.
Running VJSlippyPalm will then launch the Palm Messaging app
VJCandela VJCandela - Turn you phone into a super bright torch!
This program is used to permit control of the flash light on the Universal family of HTC Phones, to allow it to be used as a torch etc.
Note: this may cause damage to your hardware over prolonged periods! I don't see why it should, but use at your own risk
VJKeyPress This program can be used to simulate pretty much any keypress on the PocketPC
VJBrisk VJBrisk - VJBrisk is a small .exe file that can be used to replace another .exe.
eg, If you want to change your (for example) Inbox.exe application and make it launch a third party email application, but the Inbox.exe is somehow hardcoded into a skin or application, then rename VJBrisk.exe to Inbox.exe, and replace the old Inbox.exe with the new one
VJPhoneTools VJPhoneTools - These tools are used with the PocketPC Phone Edition to make an SMS, Email or call from the command line.
This software is a replacement for my old tools, VJSMS and VJDialer.
This replacement is hopefully now Windows Mobile 2005 compatible. This new release features the ability to send an SMS directly, without having to write the text in the SMS editor
VJDeviceLock VJDeviceLock - This program is only for use with the new Phone Roms that provide the Today Plugin, "Device Lock".
This small program can be launched, and it will immediately lock the phone using that plugin.
I'm not sure what it's compatible with - it works on my HTC Universal, and may work on the HTC Wizard
VJBaseHue VJBaseHue - This program is used to set the colour of the SoftKeys and Start Bar on WM5.
Modify the shortcut by adding a number on the end to represent the Hue you want
Use this chart to give you an idea of what value to use
VJPhoneToggle VJPhoneToggle - This program is used to toggle the phone.
If you have worries that the phone is using up too much memory in the background, assign it to a hardware key or a shortcut.
If the phone is open, it will be closed. If it is closed, it will be opened
VJPhoneShortcuts VJPhoneShortcuts - Install this app to have a shortcut to the Call History screen and the Speed Dialer Screen on WM5 devices.
Current Tools:
-Enable Speaker Phone
-Jump to SpeedDialer
-Jump to CallHistory
-Load Inbox and check Pop Email (you must be in the Email account to use this, eg not in SMS account. This will be improved in the future
VJTaskKiller VJTaskKiller - This program is used simply to kill a task by its title.
This is a command line application. It comes in two versions, one normal, one silent that won't show a message box if it can't find the application.
Usage: merely specify the caption of the window you want to close as a command line parameter.
Example usage
