AutoActiveSync - Installation Note: Install 2.5 and then unzip 2.5.2 and copy to program files folder (before that stop service and exit configurator!).
AutoActiveSync is a software to auto-connect via BT when in range of Bluetooth cradle (your device could be on or suspended).
There are two settings:
• first: select device from list (device must be paired – this device is computer with ActiveSync profile)
• second: select interval of searching (in suspend and in powered on mode) – this settings are in milliseconds. Please don’t set less then 15000 (15 sec)! Remember that less value cause your device to more often wake up from suspend to unattended mode and check for device if is in range (this could drain battery).
How does it work? It is looking for some system states before looking for specified by user BT cradle and allowing to connect:
• device can’t be connected to cradle (any other connection by USB or manual via BT will be detected)
• device can’t be connected to BT A2DP or BT Hands Free (this is to prevent of audio interruptions)
• device must be charged over “VeryLow” state (I think this is around 20%) or being connected to charger
Usage. After installing please run AutoActiveSync from start menu (this is only configurator - you must configure it before first usage). Then just run the service (on first tab). After restarting device service will autostart (via startup folder in Windows directory). Please note, that application can crash before accepting usage of unsigned dll's!
Warning! Remember, that not only searching for device via BT could drain your battery. When ActiveSync is connected via BT and device is in suspend mode in real it is unattended mode. It mean, that for example CPU is working normally (not in deep suspend) and draining battery.
Registry. This software store settings in registry, right here: HKCU/Software/AutoActiveSync
What's New in This Release:
· Bug fix for scheduling (now tested) and new feature - allow enable wifi using Comm Manager when autodisabled after connecting to A2DP or ActiveSync.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
CellGauger CellGauger is a graphical gauge of the level of signal from your cell phone tower
Call Rejector Reject unwanted calls or advertisement calls
Kai's Phone Spelling System .Net Kai's Phone Spelling System .Net - Do you often need to spell words and phrases on the telephone? There are several standards. The most common is ''Englisch/Nato/ICAO''. If you want for example spell ''Hello'' , then you say: Hotel, Echo, Lima, Lima, Oscar
DriveReply 2.1 for Windows Mobile 6.0-7.0 (src 2) DriveReply allows the user to comfortably focus on operating their vehicle and know that any callers or text messages that are inbound, will not go unanswered. Instead, their inbound contact has been answered with a responsible message that the recipient is driving and will contact them in the near future
DTMFCallingCard DTMFCallingCard - DTMFCallingCard is a quick way of entering your calling card number to a phone booth or phone via DTMF. Set your calling card number in the 'Options'. When you want to call a person place the speaker of the PocketPC to the mouthpiece of the phone and tap the button to send the card number via DTMF
DtmfButtonser DtmfButtonser - DtmfButtonser is a DTMF dialer for Windows Mobile. The app lets you create contact buttons with cellular DTMF extension codes attached.
To each button you can assign a name, phone number and DTMF code. After pressing a button, the application will dial the phone number and then it will send the DTMF tones to the number
PhoneCodes PhoneCodes - PhoneCodes contains a list of phone codes that might be helpful.
PhoneCodes requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
LeoExtendedNotifications LeoExtendedNotifications is a small app that blinks the keypad when there are notifications.
If you also use KeypadLedControl, you may get some irregular blinking during notifications. Nothing serious
CallsCSV CallsCSV creates a CSV report of your incoming and outgoing phone call logs. Just tap the button and enter the name for the CSV file. The app will create a CSV report of all the calls you have made or received on your phone and convert it to a CSV file. NOTE: Each device has a maximum number of calls it archives (e.g. 300 calls for Samsung)
Dynamic Operator Name This program monitors your bill using USSD, and shows your current balance instead of the operator name
Other Software by developer «dmkpoznan»:
not found
Comments on AutoActiveSync:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
AutoActiveSync is compatible with your device AnyDATA ASP-318
