Msm7kCpuSpeed - An application for overclocking the MSM7k SoC on the Raphael. The same processor is present on the Diamond, Rhodium and the Topaz, so it should work on all of these devices. It was able to underclock to 57MHz and overclock up to 710MHz, using small 19.2MHz steps. It can clock even further, but it depends on the quality of the processor in your device where the limit for you lies.
Notes on overclocking:
1) AT YOUR OWN RISK
2) Only works while connected to AC power
3) The "604MHz" OC frequency is a special one. Only with this frequency set, you can remove AC power without having a lockup. So: after you overclock and want to remove your USB cable, set it to 604MHz first! You'll see it go back to the default 528MHz a second after you remove the cable. That's something the device does, not the app.
4) Overclocking while on battery gives insta-hang.
5) "Apply at boot" is disabled as under- or overclock would hang at boot.
More information is available on the applications webpage.
· The CPU speed is calculated from the actual clock registers, not via some dll or shady method
· CPU speed is updated every 250ms
· A small dot blinks on each update so that you can see if your device hangs or not.
· Under- or overclock by moving the slider
What's New in This Release:
· Enabled apply at boot option (Choose wisely, if your device hangs on boot, you'll need a hard reset)
· Fix app crash (trackbar exception) when going into standby
· Increased max freq to 902.4MHz for those fortunate enough
· SoD/hang on battery/etc not fixed yet
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Requirements:HTC Raphael/Diamond/Topaz/Rhodium
Supported operating systems:
Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
Camera Patch for Memory Card for HTC Touch Camera Patch for Memory Card for HTC Touch - There have been instances when, after recording a video clip to a memory card, there was a long delay before the 4 icons (Camera, Send, Delete, and View icons) were displayed on the Camera screen
MySettings Use MySettings for direct access to the Windows Mobile Control Panel entries
Touch Power Touch Power - StandBy, Soft Reset, Power Off for TF3D. Short press on "Power button": Kill manila & Launch "Touch Power". When TF3D isn't started just press Power button to load TF3D...Auto standby with Worstenbrood - TF3D Stanby
Associate Associate - Associate allows you to associate certain file-types you choose with a program and icon. Thus, if certain types of files no longer run after a program has been uninstalled, you can re-associate them with another program
Shake'n'wake Shake'n'wake - This utility creates a message queue and monitors power notifications. When the device is suspended, this application is put in unattended mode allowing it to continue running. Also the GSensor is requested to stay awake so it can remain to be polled
Kai's - Today Cell Info Kai's - Today Cell Info - Today CellInfo shows important informations of the phone on the Today Screen. Name of the Network, Homezone, signal strength, GPRS or UMTS available or connected, W-LAN and Bluetooth.
Today Plugin for the Today Screen
Name of the Network, e.g
Kai's Outlook Pack.Net Kai's Outlook Pack.Net - 17 chosen Pocket Outlook programs for Pocket PC 2003, 2003 SE, WM 5 and for Windows Mobile 6 Professional. Use all possible opportunities of your Windows Mobile. You save more than 110 US$ compared to single purchase.
Birthdays & Anniversaries (This program lists your birthdays and anniversa..
Kai's Auto Softreset.Net Kai's Auto Softreset.Net - Dieses Programm fuhrt selbstandig, jeden Tag ein Softreset zu einer bestimmten Zeit durch.
Zeit einstellbar (z.B
isMToday isMToday is simply a CHome/Titanium plugin which displays your Alarms (G-Alarm or Klaxon) and your Profiles (G-Profile)
HTC EndKey HTC EndKey gives quick access to lock, vibrate and flight functions
Other Software by developer «Martijn Stolk»:
LeoExtendedNotifications LeoExtendedNotifications is a small app that blinks the keypad when there are notifications.
If you also use KeypadLedControl, you may get some irregular blinking during notifications. Nothing serious
LeoCpuSpeed LeoCpuSpeed is an app to control the speed of the CPU
KeypadLedControl KeypadLedControl By default the keypad lights turn off after 10 seconds when the device comes out of standby. This little application keeps the light on while the display is on
TorchButton TorchButton Dropped your keys? Finding something behind the bench? Performing surgery on a computer and need to find that jumper on the mainboard?
This is a simple application built for some HTC devices that have a hardware LED, normally used to take pictures in the dark. However the LED can be used as a handy pocket flashlight
