Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
Zevele's Blinker Zevele's Blinker - This application blinks the device LED every few seconds. The idea is to have some notification that the device is still alive.
· Blink the LED every few seconds. If the battery level is below the threshold, orange led is blinking otherwise the green on is used
Sparkler Sparkler - This program converts your PocketPC computer into a sparkler.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer. For free support on installing email me
TorchButton TorchButton Dropped your keys? Finding something behind the bench? Performing surgery on a computer and need to find that jumper on the mainboard?
This is a simple application built for some HTC devices that have a hardware LED, normally used to take pictures in the dark. However the LED can be used as a handy pocket flashlight
Kai's Screen Rotator.Net Kai's Screen Rotator.Net - With this free program you can turn the screen in all 4 directions. You can lay the program on a button for fast access. This program is of special interest for devices where a rotate function is not more available, e.g. HTC Touch Diamond
PLToggle PLToggle is a small app that toggles the display orientation back and forth to the rotation of your choice, without the need for the g-sensor.
The default installation includes the settings screen (available from your start menu), and the application itself, which is available via a long-hold of the call button
O2Flash O2Flash - Flashlight application for Windows Mobile. O2Flash is integrated into the O2Compass installer, but if you need it alone...
What's New in This Release:
· The application does not let the phone to sleep, so the flash doesn't turn off when the screens turn off
TouchLockPro TouchLockPro is designed not to interfere with running applications and is a multipurpose locking application. Other locking solutions are often specific for locking only incoming calls/SMS. A lot of locking solutions also place a (transparent looking) Window on top of the running application (e.g
SnowMan SnowMan - This program displays a snow man and displays a holiday banner.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer. For free support on installing email me
WVGAFIX3 WVGAFIX3 -This program allow you to change screen resolution. WVGA<->VGA and WQVGA<->QVGA.
Program designed mostly for devices with wide screens - 800x480 or 400x240 (Toshiba G900, SE Xperia X1, HTC Touch HD, HTC MAX 4G).
So if game or program don't work in wide mode you can try it in normal VGA/QVGA mode. Probably it will work
Rotate Screen Toggles the screen orientation from portrait to landscape and vice versa
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device AnyDATA ASP-500GA
