LeoCpuSpeed is an app to control the speed of the CPU. Started out as a test to determine if the "1ghz hack" was genuine or not, and ended up to be able to control cpu speed and to overclock to some degree.
Notes on auto-apply speed at startup
1) Disable autoscaling
2) Select the cpu speed you want
3) Menu > Apply speed at boot
Notes on overclocking
1) Obviously overclocking is completely at your own risk, as you could harm your device. Luckily, in most cases, your device will just lock up and you'll need to restart your device (remove battery, re-insert and turn on again).
2) The green buttons were the overclock settings that have been successful 9 out of 10 times. The orange speeds have been successful like 5 out of 10 times. The red speeds have never worked for me yet.
3) The higher the speed, the more unstable. This is mainly because I don't have a way to increase voltage of the core.
4) Overclocking only works on AC power! When on battery power, the overclock will work but will be undone within 500 milliseconds by the OS. Something within the OS, or a driver, or the radio rom, enforces the proper CPU speed every 500ms.
Notes on battery
I have seen only very very miniscule differences on battery usage when using 998MHz all the time. You really wouldn't notice the difference if it were at 998MHz all the time, or at 768MHz (default). The only thing you _do_ notice, is that it feels snappier.
Try playing a decent movie in TCPMP or coreplayer with autoscaling on, and try again with autoscaling off and at 998mhz. Huge difference. (Note that some ROMs already have autoscaling disabled and will run at 998MHz all the time, like CleanEX. You won't notice a difference there obviously.)
· Updates CPU speed every half second (calculated from the processor registered directly! not from some driver)
· Can stress the CPU to show you that it goes up to 998mhz under load (when idle speed is less than 998mhz)
· Disable autoscaling so that you can control the speed yourself
· Select the speed you want by moving the slider or pressing 768/998 presets
· Automatically disable autoscaling and set speed at boot (via menu)
· Overclocking
What's New in This Release:
· For advanced users only: call LeoAutoCpuSpeed.exe with a custom performance level to set that speed (and disable autoscaling if enabled). So, calling "LeoAutoCpuSpeed 12" will set it to 768MHz. And FYI, 18 = 998MHz.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Requirements:HTC Leo
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
IE Cleaner IE Cleaner - After you use your Pocket Internet Explorer for a while, the documents and URLs that you have accessed are cached in PDA's RAM or flashcard.
IECleaner helps to remove those temporary file in a single click! It detects your PIE setting automatically. There is another program from MobileGX, IECookie viewer lists all "cookies" and manage them
Stayon Stayon - Stayon is an application that stops your Pocket PC from automatically turning off after a set time.
This can be useful when you want to keep looking at information (a form perhaps) for a longer time than is configurable
Softkeys Control Panel Applet (SoftKeyAppletEx) Softkeys Control Panel Applet (SoftKeyAppletEx) - The SoftKeyAppletEx application is a control panel applet that allows to change the applications linked to the softkeys that you find on the today screen since Windows Mobile 2005 is out. So this applet is not for previous versions of Windows Mobile
Pocket Talkit Pocket Talkit - Introduction:
Pocket Talkit was written for the mobile user who does not always find it convenient to use a stylus to enter and retrieve information from their Pocket PC.
With Pocket Talkit information can be accessed without a stylus
Seeker of Special Seeker of Special - You always want find out more info about your PDA, where are all the special directories? SoS is handy. It stands for "Seeker of Special Folders".
It is FREE. But we don't mind if you'd like to donate $3.00 for us to continue the development
ShutDownMe Power Off your Pocket PC by tapping your screen. Only tap the screen and it will Shutdown, just like you press the power key
XGuru An overclocking utility for Intel XScale processors. Compact yet effective
TF3D Standby TF3D Standby - A tool which gets the mobile device into standby while running TF3D without the need for MortScript, S2U2 and so on. It monitors powerstates like S2U2 does and turns off or turns on TF3D which allows the device to go into standby.
What's New in This Release:
· Timeouts are now configurable via register
Awady PPC Saver PPC Saver protects your pocket pc against accidental turn on while you are putting it in your pocket or a tight place
VoiceCentral 3.1 WM5 PPC VoiceCentral 3.1 WM5 PPC - Finalist in the "Speech" category at Pocket PC magazine's 2005, Fifth Annual Best Software Awards With Fonix VoiceCentral, true mobility is now possible through the power of speech
Other Software by developer «Martijn Stolk»:
LeoExtendedNotifications LeoExtendedNotifications is a small app that blinks the keypad when there are notifications.
If you also use KeypadLedControl, you may get some irregular blinking during notifications. Nothing serious
KeypadLedControl KeypadLedControl By default the keypad lights turn off after 10 seconds when the device comes out of standby. This little application keeps the light on while the display is on
Msm7kCpuSpeed Msm7kCpuSpeed - An application for overclocking the MSM7k SoC on the Raphael. The same processor is present on the Diamond, Rhodium and the Topaz, so it should work on all of these devices. It was able to underclock to 57MHz and overclock up to 710MHz, using small 19.2MHz steps
TorchButton TorchButton Dropped your keys? Finding something behind the bench? Performing surgery on a computer and need to find that jumper on the mainboard?
This is a simple application built for some HTC devices that have a hardware LED, normally used to take pictures in the dark. However the LED can be used as a handy pocket flashlight
