Zevele's Blinker - This application blinks the device LED every few seconds. The idea is to have some notification that the device is still alive.
· Blink the LED every few seconds. If the battery level is below the threshold, orange led is blinking otherwise the green on is used.
· If the radio is turned off or there is no signal, another orange blink occurs (in addition to the regular one).
· When the phone is charging the orange LED lights constantly, every few seconds a sequence of green blinks according to the batter level occurs (20-40% - 1 blink, 40-60% - 2 blinks, 60-80% - 3 blinks and 80-100% - 4 blinks). If the battery is fully charged - the green led lights constantly.
· Blink interval and length can be set via the registry.
· Running the link once starts the application, on blink sequence occurs. Running the link again shuts the application, off blink sequence occurs.
· Blink sequence for the normal, low battery, no-signal, on and off blink sequences can be set via the registry
What's New in This Release:
· Fixed issue where Blinker halts at midnight.
What's New in 1.6:
· Fixed issue where custom LED id's were not saved.
What's New in 1.3:
· Blinker can now use the notification system instead of directly check the Stores. This can be configured in the setting, under "Use WM Notifications".
· Blinker can be configured to load on startup from the settings window.
· Improved performance.
· Some minor interface improvement to the settings dialog
What's New in 1.2:
· Added possibility to set the green/orange LED id.
· Added possibility to set the SMS store name.
· Improved error handling in case SMS store is not found
What's New in 1.1:
· Added notifications for new message (SMS/EMail/Voice), missed calls and wireless status.
· Added possibility to blink the keypad light as-well.
· Added separate delay interval on new message or missed call.
· Tweaked the unattended mode. The halting problem still exists, but it seems better now.
· Added a configuration utility. To run it press the Blinker shortcut again (after blinker is already running).
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 2003, Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
EmergencyFlasher EmergencyFlasher - EmergencyFlasher can display a flashing light and it can be used when in emergency situations, at night.
EmergencyFlasher requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
ScreenCap ScreenCap, or Screen Capture saves a screenshot with whatever is currently on the Pocket PC screen.
ScreenCap is very easy to use. Start ScreenCap and then start which ever program's screen you wish to capture. When you have the screen you want to capture on the Pocket PC, press one of the buttons on the Pocket PC
Morse Torch Morse Torch - convert your mobile into a pocket torch! This torch comes with a PTT key that allows you to use the torch for sending a message in morse code. The programm uses the mobile's flashlight LEDs.
Try the free demo version! This program is designed to work with HTC HD2, no other models have been tested for compatibility so far
O2Flash O2Flash - Flashlight application for Windows Mobile. O2Flash is integrated into the O2Compass installer, but if you need it alone...
What's New in This Release:
· The application does not let the phone to sleep, so the flash doesn't turn off when the screens turn off
SoftNest discoSTROBE SoftNest discoSTROBE - The most stupid Application in the world
This Application simulates a Disco Strobe with various speeds (including random) and random optional colors.
Now you can simulate a Disco with your device, just put your favorite dance music, turn on discoSTROBE and have fun.
FREE $19
CEBeans FlashLight CEBeans FlashLight - This program converts your Pocket PC into a flashlight.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
BlackMe BlackMe is a tool that turns the screen off while you don't need it.
You can use it while logging gps data (for example with WMMiniGPS), when you connect your device to the desktop to sync/recharge it, when you're listening to music with an mp3 player, etc...The best method to use this program is to associate a button to it (through Settings->Buttons)
SpoonTorch SpoonTorch - Does your phone or PDA not have an external light on it? Do you want to use your phone's screen as a light?
This application lets you quickly create a white screen to use as a torch.
· Single tap of the screen to make the whole screen turn white. Tap again for the menu.
· Switching to fullscreen, backscreen brightness is set to maximum
Kai's Flash Light.Net Kai's Flash Light.Net - Use your Pocket PC as a flashlight. You can use the whole brightness of the screen, set color, choose from different lamps and let it blink
ScreenBlanker ScreenBlanker - This program allows you to blank the display of your PocketPC screen.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
Other Software by developer «Zevele»:
Zevele's SimplePiano Zevele's SimplePiano - A simple piano application for Windows Mobile.
· WVGA, VGA, QVGA, HVGA versions.
· It has three octaves.
· Record and Playback.
· Dualtouch via the PinchToZoom events
· Customizable skins.
· Customizable sounds (currently include Piano, Acoustic Guitar & Violin)
Zevele's AutoLoudspeaker AutoLoudspeaker is an application that will automatically turn on the loudspeaker when the phone is away from the ear, and turns it off when it is near the ear.
AutoLoudspeaker is fairly simple to use. When running the application a service starts. If the shortcut is pressed again, a notification message pops and the user can choose to close the service
