Categories: Multimedia & Graphics, System Utilities
Upload date: 21 Jan 11
Developer: Zevele
License: Freeware
Downloads: 6221 File Size: 343 Kb
AutoLoudspeaker is an application that will automatically turn on the loudspeaker when the phone is away from the ear, and turns it off when it is near the ear.
AutoLoudspeaker is fairly simple to use. When running the application a service starts. If the shortcut is pressed again, a notification message pops and the user can choose to close the service. As long as the service runs the loudspeaker will automatically switch on if the proximity sensor is unblocked and off if it is blocked (only during an active phone call).
· Switch the loudspeaker according to the proximity-sensor or g-sensor.
· Answer an incoming call by gesture (wave your hand in front of the proximity-sensor).
What's New in This Release:
· Add ability to automatically answer a call when the proximity sensor is blocked (altec1000's request). This feature can be set by selecting the "Block" gesture in the settings window. The gesture first waits for the sensor to be unblocked for a certain amount of time, after which it checks that the sensor is blocked for a second period of time - only if both periods were fulfilled AutoLoudspeaker will answer the call. Two registry keys were added: BlockGestureOpenDelay - Sets the minimum period (in msec) the sensor has to be unblocked before checking the block status. BlockGestureBlockDelay - Sets the minimum period (in msec) the sensor has to be blocked before answering the call.
· Add command-line controls (to Start/Stop the service). Two commands are available: quit - Stops the service. update - Force AutoLoudspeaker to reread the settings from the registry.
· Changed the notification behavior. Now pressing the notification immediately brings the Settings application.
· I've included the proximity-sensor registry keys of Omnia2 reported by O2amksin.
· Some minor code and gui changes.
What's New in 1.5:
· Reverted to the polling method of v1.3 for the Proximity-Sensor (it just works better). This should also solve the exception on devices with no proximity sensor.
· Fixed issue where AutoLoudspeaker failed to create a shortcut in a non-English localizations.
· Fixed issue where the notification icon remained visible when the service was closed from the settings application.
· Fixed an issue where the delay occurred also before turning the speaker off (instead of just before turning it on).
· Added a short vibration before changing the loudspeaker state. The vibration length can be set via the registry value: HKCU/Software/AutoLoudspeaker/VibrationLength (default: 20ms). The vibration LED index can be set via the value: HKCU/Software/AutoLoudspeaker/VibrationLED (default: 1 - this is the one for the HD2).
· If proximity sensor is not detected (it's registry keys are missing) the possibility to select the proximity method is disabled in the settings application.
· Some performance improvement for the "managed service" code
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 2003, Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Pocket Multimedia Pack Pocket Multimedia Pack - Includes:
Pocket e-Piano
Pocket SuperDraw
PlayNote
Windows Media Player Skin
IMPORTANT NOTE: For PocketPC2003, you may have to install eMbedded Visual Basic Runtime for Windows Mobile-based Pocket PC 2003 available at
http://msdn.microsoft
FakeCamera FakeCamera - This program makes it sound like you have a camera and are taking pictures. Tap the button or the joypad or action buttons to to make the camera sound.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
ProgressRecorder ProgressRecorder is a high definition 44Khz mono voice recorder. It allows you to set a 'maximum time' to each recording. Select 'Record' from the toolbar and enter the name for the file to the recorder and tap the 'Stop Record' button to stop the voice recorder. NOTE: The program overrides the default WindowsCE wave format settings
MicrophonePC MicrophonePC converts your PocketPC into a microphone for your desktop PC computer. Connect the speaker input jack the headphone jack and tap the button to enable the microphone. The program also has a slider that you can use to adjust the power out level of the amplifier. NOTE: Make sure your PC speaker input is compatible with your headphone jack
DogCaller DogCaller - This program allows you to record a message that you use to call your dog. Tap the button to play back the dog call.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
VoiceMonths VoiceMonths - This program is a WAV voice note explorer based on file dates. Select 'Update Database' from the toolbar and the program will create calendars of the WAV files for the current months. Tap on the wav to play.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
Wing Audio Recorder (QVGA) Wing Audio Recorder (QVGA) - Wing is our designed conception. Based on the user's convenience is our develop direction. Friendly user interface and easy operation make user fly in the windows mobile system with the WING
RecorderPhone RecorderPhone is a high quality (44Khz) phone tap recorder with dialer. When you enter a phone number the program will start the voice recorder and the dial the number. The program records the conversation into a wave file. You can explore the and playback the wave files in the built in file explorer interface
VoiceNumberer VoiceNumberer - This program allows you to make voice notes with a counter and prefix. Set the start count and prefix in the 'options' setting. Each time you make a voice note the wave file name is named as the current number count.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
Other Software by developer «Zevele»:
Zevele's Blinker Zevele's Blinker - This application blinks the device LED every few seconds. The idea is to have some notification that the device is still alive.
· Blink the LED every few seconds. If the battery level is below the threshold, orange led is blinking otherwise the green on is used
Zevele's SimplePiano Zevele's SimplePiano - A simple piano application for Windows Mobile.
· WVGA, VGA, QVGA, HVGA versions.
· It has three octaves.
· Record and Playback.
· Dualtouch via the PinchToZoom events
· Customizable skins.
· Customizable sounds (currently include Piano, Acoustic Guitar & Violin)
