SIPChange - SIPChange is for those who can no longer change their defaultIM using the reghacks after upgrading to AKU2.x. No matter what you choose, the keyboard SIP is always selected after a soft reset.
If you aren't having this problem, then you don't need this little app.
The problem occurs because some AKU2 based service or process is changing the SIP back to the keyboard. This happens 4-8 seconds after startup programs run. As such, SIPChange is a workaround of sorts because when it runs at startup it waits 10 seconds before changing the SIP to your selected default.
SIPChange has two execution modes. If executed with no parameter, it presents the list of SIPs available on your device and allows you to select a default. Once set, this information is stored in the registry. If executed with "SET" as the parameter it minimizes itself, reads the default from the registry and waits 10 seconds. When the timeout expires, it sets the Current SIP to your selected default and closes.
How to use:
1. Copy the attached CAB to your device
2. Tap on the cab using file manager to install.
Now open SIPChange by tapping Start->Programs->SIPChange. You will be presented with a list of your available SIPs. Highlight the one you want to become the defaultIM. If you wish, you can change the default delay as well. Now tap the "Select" button. The SIP will be changed to your selection and SIPChange will close.
That's it! The next time you (or your automatic nightly backup) resets your device, the default SIP will be reset to your choice.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
Hot fix for prolonging the time allowed to input PIN on the PIN required screen of HTC Touch Dual Hot fix for prolonging the time allowed to input PIN on the PIN required screen of HTC Touch Dual - When you insert the SIM card for the first time or when you restart the device with the PIN required process enabled, the PIN input prompt only stays active for 1 second and then disappears. If you encounter this issue, install this hot fix to resolve this problem
Hot fix for system hang resulting from Bluetooth usage when memory is low for HTC TyTN II Hot fix for system hang resulting from Bluetooth usage when memory is low for HTC TyTN II - Using Bluetooth when your device is low on available memory (below 10 MB), such as while running several programs at the same time, may cause your device to hang. Download this hot fix to resolve and prevent this problem.
Copy the hot fix, which is an exe file, to your device
ScreenOn ScreenOn - ScreenOn is a tiny utility that does exactly what it states. It turns your Windows Mobile display screen ON.
This is a useful application for automation purposes, where other programs might have turned OFF the screen, and you want to turn it back ON
HComber HComber is an application to change Icons of start menu entries for Windows Mobile 6.5
Hot fix for HTC TyTN II photo quality issue Hot fix for HTC TyTN II photo quality issue - If you zoom in on a captured photo and notice grainy, maze-like patterns within the image itself (this problem is caused by too much sharpness enhancement being applied in bright-light environments), download and install this hot fix to solve the problem
RoamingFix6.5 RoamingFix6.5 - Force roaming on Sprint Windows Mobile 6.5 phones. There are three options: Home, Automatic, and Roaming. Those of you on VZW who use A/B, should not install this cab, as Automatic is the equivalent of Auto B on VZW
TF3D Standby TF3D Standby - A tool which gets the mobile device into standby while running TF3D without the need for MortScript, S2U2 and so on. It monitors powerstates like S2U2 does and turns off or turns on TF3D which allows the device to go into standby.
What's New in This Release:
· Timeouts are now configurable via register
Phone Alert Screen Customized Phone Alert Screen displayed on an incoming call when the phone is locked
Hot Fix for Resolving a Display Flicker of the Title Bar in TouchFLO 3D Hot Fix for Resolving a Display Flicker of the Title Bar in TouchFLO 3D - In some circumstances, you may experience a frequent flickering of the title bar in TouchFLO 3D. If this happens, install this hot fix to resolve this problem.
Copy the hot fix, which is an .exe file, to your device. To install the hot fix, tap the .exe file and follow the on-screen instructions
PTTFix PTTFix - this little application replaces the Cingular PTT service and adds customizable launch capabilities back to that useless PTT button on your Cingular ROM equipped Hermes. This patch initially maps the PTT button to the built in Voice Dialer, but you can re-map the push as well as the hold functions to the application of your choice
myRadar myRadar is a location aware radar application that makes use of Wunderground and Accuweather US web services to show real-time, animated Radar Images of your local area regardless of where in the US you might be. This application requires myLocation services to function automatically.
The program will install to /Program Files/myRadar
mySearch mySearch is a location-aware search application that uses Microsoft Bing to return results based on your current position. Just enter in your search term and press the search button to return location specific results!
If your device has HTC's G-Sensor service then simply orient the screen for landscape or portrait mode
myLocation myLocation- It seems like websites and online services are popping up everywhere that can use location to give you more relevant information. Accuweather and others feature location aware weather sites and Google Maps can accept coordinate information to return location aware search results. Of course, with positional awareness comes controversy
ATI ImageON Fix ATI ImageON Fix - This application fixes the ATI ImageON acceleration bug. This is the bug that causes the screen to "tear" during accelerated video playback using CorePlayer, TCPMP or other players that take advantage of the ImageON hardware acceleration. Once this bug is occurring, the entire screen is unreadable until you somehow exit from the video player
