|
PocketShield Have you ever accidentally ignored an incoming call? Have you ever accidentally answered a call and left the caller 'talking to your pocket'? Have you ever accidentally dismissed reminders or alarms? …or 'never heard of them'? Has your mobile phone ever freezed because of too much 'touch input'? Have you ever had programs mysteriously starting 'by themselves'? Has your ear ever started a program? Has your phone ever drained out batteries too fast because of being ON inside your pocket?
If you answered 'YES!' for any of the questions above, then this is great news for you!
What is?
PocketShield is an intelligent locking/unlocking application. Prevents accidental touch on the phone screen specially when it is turned on not precisely by you. For example: when receiving calls, email notifications, SMS, alarms, etc. As you may have experienced, PocketPCs “wake up” whenever any of these events occur, they will also wake up when batteries are low, and randomly when phone signal changes antenna depending on your location. But the problem is: what if the phone is inside your pocket in that moment? or inside its case or pouch? Touch screens will take any touch over it as a user input, and arbitrary “touching” could cause many undesired results! (refer to questions on top).
“But Windows Mobile has a built in screen locker!”
Yes, Windows Mobile locks the screen, but unlocks the Answer and Ignore buttons as soon as a call rings, so doesn't help. The same happens when any notification pops up, the Snooze and Dismiss buttons are enabled even when screen is locked, leaving them vulnerable to any accidental touch.
Oh! Now I see… So, how it works?
PocketShield completely locks the screen when phone wakes up and is inside your pocket or case, and unlocks it automatically as soon as you take it off. Magic? Now a days, most phones come with an integrated light sensor, PocketShield uses this sensor to determine if the phone is inside something(without light reaching it). So if it’s receiving light it is probably because you have it in your hand, or you have it over your desk, or someplace where there would be no reason to have it locked.
Interesting… But what if it’s dark or it is night?
Good question! If that’s the case, you still have 5+ extra unlock options:
* Hand gesture, moving it in a particular way.
* Slide your finger over the screen from the top towards down.
* Stylus out.
* Press D-pad round button.
* Application permissions
You can combine any of the 5 unlocking mechanisms, as they are designed to work together. Choose the configuration that suits you better!
So, during day, unlocking is going to be 100% automatic, no need to worry. Only at night (or when no light) you would need an alternative way to unlock.
· Auto lock, no need to worry about locking, just turn off(sleep) your phone and feel confident.
· Screen auto-unlock when out of pocket, or when light available.
· Screen unlock by sliding finger from top towards down (vertical sliding for improved hand ergonomics)
· Unlock by gestures (flipping or shaking phone).
· Customizable hardware keys blocking.
· 5+ ways to unlock, 6+ for the Touch Pro.
· Answer calls by gestures, or slide.
· Vibration feedback when you unlock or when auto-unlocks.
· Digital clock with date option. 12H or 24H option.
· Displays caller name, number and contact picture for incoming and outgoing calls.
· Displays missed calls, reminders, alarms, SMS, email.
· Subtle and accurate battery indicator.
· Manual lock.
· Option to directly power off device when manually locked .
· Auto power off after 20 seconds if never unlocked (battery protection).
· Screen protection during calls (or after calls)
· Customizable layout and/or background image.
· Skins/themes supported
· Application permissions for unlock
· System settings helper
Non-activated software will have a 10 second count down screen shown randomly saying that you are using the trial (this will not interfere with phone calls). It will be also restricted to 1 theme download.
What's New in This Release:
· Fixed random crash when receiving calls
What's New in 3.7.0.6:
· Fixed issues with Screen Off warning for apps in "Except when" list.
What's New in 3.7.0.5:
· Fixed tasks without icons
· Fixed crash when trying to dismiss alarm notification
· Fixed crash with some skins when alarm active (need to reinstall skin)
· QVGA version updated
What's New in 3.7.0.3:
· Fixed error if NetCF3.5 not installed
· Added "slide to hide" notification from lockscreen without unlocking (will not dismiss the original notification).
· Added option to close all open apps (from apps notification, slide over the red side)
· Language updates
What's New in 3.7:
· New notification for running apps
What's New in 3.6:
· Facebook contact picture integrated to caller ID screen (if synced to FB via Sense)
· Changed: if "Lock after call" enabled will also lock if call ended while dialing
|
Similar Software:
|
 | ScreenCap
ScreenCap, or Screen Capture saves a screenshot with whatever is currently on the Pocket PC screen.
ScreenCap is very easy to use. Start ScreenCap and then start which ever program's screen you wish to capture. When you have the screen you want to capture on the Pocket PC, press one of the buttons on the Pocket PC |  | BlackMe
BlackMe is a tool that turns the screen off while you don't need it.
You can use it while logging gps data (for example with WMMiniGPS), when you connect your device to the desktop to sync/recharge it, when you're listening to music with an mp3 player, etc...The best method to use this program is to associate a button to it (through Settings->Buttons) |  | SmartLight Automatic Backlight
Tired of the display backlight going out when you are looking at the screen - e.g. while thinking about the right word for an sms? Wouldn't it be nice if your phone knew when you needed the light and when not? SmartLight does just that: Once you have opened an application, the backlight stays on - until you close or hide the application, switching the light off automatically |  | BugLight
BugLight - This program displays a flashing light to attract bugs to the computer and away from you when you are outside.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer |  | SpoonTorch
SpoonTorch - Does your phone or PDA not have an external light on it? Do you want to use your phone's screen as a light?
This application lets you quickly create a white screen to use as a torch.
· Single tap of the screen to make the whole screen turn white. Tap again for the menu.
· Switching to fullscreen, backscreen brightness is set to maximum |
|
 | LEDFlashlight
LEDFlashlight - turns your PocketPC into a LED flashlight. Simply tap the button to power on the camera LED light and tap again to power it off. It works on Samsung Omnia Lite, Omnia Pro, Armani, Omnia II, SCH i920, Omnia II, TOmnia II, Jack, Intrepid and Oz Omnia |  | ChristmasBulbs
ChristmasBulbs - This program displays rotating colour lights on your PocketPC display. Select 'start/stop' from the toolbar to start or stop the lights.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer |  | LavaTube
LavaTube - Place a glass tube on the circle and tap start. This program will send different colour light into it.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer |  | Battery Pack Pro
Battery Pack Pro-Battery life, memory space, network connection, world time, weather and more. Everything you need, displayed on your today screen. Battery Pack Pro allows you to fully customize your today screen with the things that matter most to you. Personalize the tab view by adding as many programs as you like and launch them with a single click |  | Sparkler
Sparkler - This program converts your PocketPC computer into a sparkler.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer. For free support on installing email me |
|
|
