X1BC (X1 Button Controller) is capable of capturing both short and long presses of panel key, ok key, L/R softkeys, up/down volume keys, and the win key on the slide out KB. The camera half and full press can also be captured and fully configured for short and long half press, as well as short and long full press. Also, the camera key will be ignored while the camera program is open. Capturing each key is all optional. They can be switched by the registry keys detailed in the next post. By default, if the reg keys are not there, none are captured. You can capture the long press only, short and long press, or leave the key alone. Fn key presses are also detected for A, S, D, F, G, Z, X, C, and V keys. Registry strings are used to specify what happens when the key is pressed. You can choose to open execute anything from a program exe to a mortscript to an mp3. You may also configure it to send a character or special key. This allows maximum flexibility.
The program can also make the win key or tab key a ctrl key. There are two modes of operation for each key. For the win key: Short press mode (short press to enable ctrl then press a letter), Long press mode (press letter while holding ctrl). With the tab key, it is still possible to send a tab character: Short press mode (short press to enable ctrl then press a letter; long press sends tab chr), Long press mode (press letter while holding ctrl; short press sends tab chr).
The program also supports vibrate feedback for a press and hold event. The duration is configurable or this can be disabled. Also configurable is the duration you must hold a key for the long press to occur.
To start the key hook, just launch X1BC.exe. If it is already running, launching X1BC.exe again will end the program and restore the keys to default.
What's New in This Release:
· Added special key (&R) for screen rotation
· Added special keys (&Q and &E) for left and right softkeys
· Fixed bug that cause crash if Fn key was assigned to non existent file
· Will now prevent camera app from opening if you reassign camera button
· Changed format of reg settings for camera button
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
Hot Fix to Enhance Response Time for HTC Touch HD Hot Fix to Enhance Response Time for HTC Touch HD - Sometimes the screen stops responding for about 3 to 5 seconds when running an application that needs to use the stylus to click the screen repeatedly within a short time. For example, the windows built-in software like email, SMS, solitaire, etc.
Note: This hot fix can only be installed in ROM version less than 1.19.xxx
Hot Fix for G-Sensor Calibration in HTC Touch Diamond If you encounter a G-Sensor malfunction, for example when playing the "Teeter" game or changing your web browser orientation, install this hot fix so that you can perform the calibration by yourself
ATI ImageON Fix ATI ImageON Fix - This application fixes the ATI ImageON acceleration bug. This is the bug that causes the screen to "tear" during accelerated video playback using CorePlayer, TCPMP or other players that take advantage of the ImageON hardware acceleration. Once this bug is occurring, the entire screen is unreadable until you somehow exit from the video player
iTouch iTouch - Use this application to increase the touchscreen sensitivity of your Windows Mobile Pocket PC.
FOR MAX SENSITIVITY USE FINAL VERSION iTouch_azharsunny.cab
FOR Medium sensitivity USE ( enhances TF3d and everything else!!) touchresponse_azharsunny_enchanced sensitivity
SetSIP SetSIP - Changing SIP (software keyboard) type is both cumbersome (that small finger unfriendly arrow near the SIP icon) and slow (the selection menu does not pop up for a noticeable time). Worse on Topaz (Diamond 2) the menu has 2 levels: one for selecting between Touch Input full QWERTY and Phone Keypad and one for selecting other SIP types
VJPhoneShortcuts VJPhoneShortcuts - Install this app to have a shortcut to the Call History screen and the Speed Dialer Screen on WM5 devices.
Current Tools:
-Enable Speaker Phone
-Jump to SpeedDialer
-Jump to CallHistory
-Load Inbox and check Pop Email (you must be in the Email account to use this, eg not in SMS account. This will be improved in the future
Kai's CE Pack.Net Kai's CE Pack.Net - Package of all new .Net-Applications (134 at this time).
You save more than US$ 900,- vs. buying as single programs.
That means only 47 Cent per program.
Single installation of every program
All programs are full versions, no keycode required
Download as single setup, e.g
FolderPublisher FolderPublisher - This program allows you to browse the folders on your PocketPC. Select 'Create HTML' from the toolbar to create a HTML page with links to all of the files in that folder.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
Hot fix for resolving QWERTY keyboard locking problem in HTC Advantage Hot fix for resolving QWERTY keyboard locking problem in HTC Advantage - The hardware QWERTY keyboard of the HTC Advantage does not work during ongoing phone calls. When a phone call is in progress, no actions or text will come out when keys on the keyboard are pressed. This problem only occurs in the HTC Advantage after it is upgraded to Windows Mobile 6
Hot fix to enable Live Streaming TV function for HTC Touch HD Hot fix to enable Live Streaming TV function for HTC Touch HD - This hotfix will enable Telenor Touch HD users to Stream live TV from the Telenor mobil.telenor.se portal.
Copy the hot fix, which is an .exe file, to your device. To install the hot fix, tap the .exe file and follow the on-screen instructions
Other Software by developer «Jonathan King»:
BTKeepAlive BTKeepAlive runs in the background and checks to make sure Bluetooth is on and turns it on if it isn't. The checking interval in milliseconds can be modified by changing HKCU/Software/JKing/BTKeepAlive/Interval (DWORD). The default value is 60000 (one minute) and if that reg value does not exist 60000 will be used.
BTKeepAlive can also keep discoverable mode on
A2DPSwitch A2DPSwitch toggles the connection to an A2DP headset
Timer X Timer X - A fully featured timer in the palm of your hand! TimerX has features to handle all of your timing needs
