touchAble Navigate around your live set with the touch of a finger, tweak Lives mixer, instruments and fx with full automapping and unlimited tracks & parameters.
touchAble allows live users to walk away from their computer and perform live from anywhere within Wi-Fi range while keeping latency at a minimum.
Play your favorite synths with the unique double keyboard or record your rhythms with the 16 drum pads, including 5 velocity steps & octave selectors.
Access the most important transport and clip functions without losing focus on your set and tweak the same set with two iPads with the unique Dual-User-Mode.
do you need to adjust volume, launch a new clip and play a device? Don't worry - a smart and intuitive screen menu empowers the user to arrange and switch modules on the fly.
touchAble does not require any midi-mappings as it uses LiveOSC to communicate directly with the LiveAPI
Installation could not be any simpler:
- Download touchAbleServer and install it on your Mac or PC
- Enter your Hosts Ip-Address on your iPad
- Press connect.
- Within a few seconds your set will be ready.
· Scrollable representation of your Session View in Live
· Clips, tracks & scenes with full color, name and status feedback
· Scalable Clipgrid from 4x2 to 15x8
· Access to arm, solo, mute & stop functions
· Access to Volumes, returns A-D, panning, monitors, resets, master & return volumes of up to 16 tracks at once
· Scared of clipping? Output-meters provide feedback of each tracks/masters/returns output-levels
· Choose between relative / absolute faders
· Access your vsts, audiounits and native live plugins or toggle them on & off from a scrollable overview
· Navigate and control unlimited parameters with bank switches
· Native Templates
· Never lose a parameter in the heat of a set: parameter name & value feedback directly inside the faders.
· Control 2 devices at the same time
· 128 note velocity sensitive Keyboard
· Perform with 2 keyboards in full screen mode
· 8/16 velocity sensitive Drum Pads with Access to all 128 Sample slots within Live
· Change parameters of clips : pitch, detune, loop, length, position
· Easy access to transport functions: play/stop, record, tempo, midi overdub, cue level, metronome, nudge up/down, midi record and launch quantization
What's New in This Release:
· Fixed Bug that would prevent adding custom servers if no Server was automatically found.
What's New in 1.3.1:
· Fixed: App not connecting with more than 10 Return tracks.
· Fixed: Repeated starting and stopping of clips in a track within short times killed connection.
What's New in 1.3:
Clips:
· added Loop menu to clip module. Do loops on the fly - on whole tracks or on already prepared loops. think Traktor looping - Keep loops that you like.
· added keep loop feature which allow you to save the new loop made as new clip.
· Added beatjump / loopjump menu to clip module. Do beatjump / loopjump of a set size in the currently playing clip of a track.
· track header buttons in the clip module now function as 'jump to active clip' buttons. For group-tracks they allow to fold and unfold the tracks.
Mixer:
· Completely rebuilt mixer
· added crossfader to mixer
· added A/B control to mixer
· added support for as many sends as you like + name of the send tracks are now displayed.
· added possibility to show as many faders at once as you like - and you can decide which!.
· added the possibility to control return tracks the same way you can control normal tracks
· added "+" mode to fullscreen for double length faders for precision tasks
· added snap mode to mixer
Drums:
· added velocity sensitivity mode to drum pads
Devices:
· Added Impulse native template
· Added Auto Filter native template
· Added Pingpong Delay native template
· Track Header buttons in the Device Selection View will switch Lives view to the device chain of the respective track.
XYPad:
· snapshots will be saved with saved templates of XY pad now
· after morphing / playing / stopping snapshots the dots will not be affected by gravity till touched
General:
· Added support for 4 iPads
· Added possibility to link several ipads and setting their relative positions.
· touchable will prefer a wired connection if available (MyWi etc)
· design & layout changes throughout the app
· added 16 tracks mode
· triple quick taps on relative faders will: bring the fader to max value if it is done on top of the fader, bring the fader to the exact middle value if you tap around the middle part, and bring the fader to 0 value if you tap on the bottom part.
· Finally touchable will connect via bonjour - tests show that almost no setup is needed to connect
New Settings:
Clips:
· Lock navigation in Clip grid - On / Off: If enabled, clips will start immediately after touching - but you won't be able to scroll in the clip grid
· Slide Clips to launch in Nav Lock Mode - On / Off: Makes it possible to slide e.g. a row of clips in different tracks to start them
Devices:
· Always Open Device View 8 - On / Off: If enabled, devices will always show the FX8 view instead of switching to FX32 for devices with more parameters.
Mixer:
· Relative Crossfader - On / Off: same as relative faders elsewhere - just for the crossfader
· Hide Mutes - On/Off: If enabled, mutes are hidden from the view.
· Max Shown Controls for 2/4/8/16 tracks mode (0-8, 0 being disabled): You can set the maximum amount of controls shown per channel in each of the different sizes. When changing size the mixer will automatically show/hide faders depending on your preference.
General:
· Link iPads - On / Off: enables or disables automatic following of secondary ipads.
Bugfixes:
· arm / exclusive arm fixed
· numerous fixes for smaller issues / crashes / performance improvements
What's New in 1.2.1:
· XY Pad Reverse now works as advertised
· Fixed crash when adding MIDI or Audio Tracks
· It is now possible to exchange XY Pad recordings via iTunes
What's New in 1.1.1:
· After updating - Please download the new Server & Scripts from touch-able.com. Please make sure to use the newly installed Server and select "TouchAbleScript1" as a control surface in Live.
New Features:
· Different colors for stop toggles depending on the playing status of the corresponding track
· Send & volume faders reflect the color of the corresponding track in Live
· A second tap on "Volume" in the Mixer-menu while showing 4 tracks will enable slim Volume + Send A/B/C faders at once for each track.
· Do a long tap on a clip to focus its waveform within Live and select it for Clip Manipulation
· Momentary mode on Device Page. When toggle mode is active (Button in the lower left corner of the device module) you can do a long press on a device to only momentarily change its state. To toggle the device do a short tap.
· Playing position indicator for non-looped clips.
· for clips that start playing normally and start looping at a later time we added a playing position indicator that shows the time remaining till the loop (up to 16 bars)
· Clips & Stop buttons now flash in sync with the bpm of the set currently controlled
Fixed:
· • Under some circumstances it was not possible to enable / disable devices
· Stop button for track 1 not flashing
· Meters not being shown after changing width of clips
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Apple iOS 10.x (iPad), Apple iOS 11.x (iPad), Apple iOS 12.x (iPad), Apple iOS 4.2.x (iPad), Apple iOS 4.3.x (iPad), Apple iOS 5.0 (iPad), Apple iOS 6.0 (iPad), Apple iOS 7.0 (iPad), Apple iOS 8.x (iPad), Apple iOS 9.x (iPad), Apple iPhone OS 3.2.x (iPad)
Similar Software:
TPControl for iPhone/iPad TPControl for iPhone/iPad - TPControl lets you control your AMX system from wherever you are using your iPhone, iPod touch, or iPad. Looking, feeling and working just like an AMX Touch Panel, TPControl is easy to add to existing or new AMX installations. The app supports Voice Control, AMX Intercom, TPCLockOut, TPCloud updates, G3/G4
Touchpad Elite Touchpad Elite - Control your computer wirelessly with the multi-touch features of the new MacBook line!
To right click, tap the screen with two fingers at the same time (two finger tap).
To drag, tap the screen twice, then drag (tap-tap-drag).
For a full list of controls, visit jaaduvnc
Remote Remote Control iTunes and Apple TV using your iPhone, iPod touch, or iPad over your Wi-Fi network. Choose playlists, songs, and albums as if you were right in front of your computer or Apple TV. From anywhere in your home change a song, pick a playlist or browse through your entire library
Tunes Remote Tunes Remote - Remote control your iPod Touch or iPhone music library or your favorite Internet Radio stations!
Please clear all cashes on the Remote or use the Refresh button after upgrading / before editing radio stations.
Note: to control iTunes on your Desktop you would want to use the Apple 'Remote' application
eController eController - Additional programming required for custom use. Before downloading, please visit: elxcontrol
GoToMyPC (Remote Desktop) GoToMyPC is the fast, easy and secure way to instantly connect to your Mac or PC, with access to all of your files, programs and network. And now you can take it to go with GoToMyPC for iPad.
No more filling up flash drives, worrying about forgotten files or late nights in the office. With GoToMyPC, everything you need is always just a few taps away
LEGO MINDSTORMS Robot Commander for iPhone/iPad LEGO MINDSTORMS Robot Commander for iPhone/iPad - LEGO MINDSTORMS Robot Commander allows you to command EV3 robots from your iPhone, iPad or iPod touch.
The app connects to the EV3 Intelligent Brick via Bluetooth and enables you to interact with the robot in multiple ways.
Supported models include EV3RSTORM, R3PTAR, TRACK3R, SPIK3R and GRIPP3R
iScreen iScreen - Need more screen estate? iScreen turns your iPad, iPhone or iPod into an additional wireless screen for your Mac. iScreen boosts your productivity by increasing the size of your computer's desktop.
Usage and Installation
· Before you can start using iScreen the installation of the Mac drivers is required
Splashtop Remote Desktop for iPhone & iPod Splashtop Remote Desktop for iPhone & iPod - The highest performance remote access application bringing your entire computer to your iPhone or iPod touch, featuring full video and audio support! See your desktop, use your regular web browser with Flash and all of your bookmarks, watch movies, and access any application or file on your computer
Viewer for Axis Cams for iPhone/iPad Viewer for Axis Cams for iPhone/iPad - This app allows you to view and control your Axis Network Camera using your iOS device. Cameras are easily accessible over both mobile phone and WiFi networks.
When you start the application, you will see views from all configured cameras. Double tapping on a camera view will open the video stream in a bigger window
Other Software by developer «AppBC»:
not found
Comments on touchAble:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
touchAble is compatible with your device Apple iPad 4