Platforms: iPhone, iPad, iPod Touch, Apple iPhone OS
Categories: Business & Profession
Upload date: 6 Aug 13
Developer: Schogini Systems
License: Commercial
Price: 2.99 $
Downloads: 57
Arduino Simulator - Learn and DIY Safely - 85% of the Arduino Kit buyers just play with sample codes! Here is a "ready go" app that gives you the same feel of a fully assembled Arduino Kit!!
Change the pre-defined values in the code to see LEDs blink, play with additional modules like LCD Screen, Stepper Motor, Servo Actuator and DC Motor.
Safe for kids who are interested in electronics.
For all age groups!!
Environment friendly!
This Arduino Simulator appliaction gives the user the freedom to work without the basic setup of hardware and software.
Tutorial can be found at: schogini.com/tutorials/arduino/
More..
The developer can make the necessary changes in the code - delay, pin number, and state - 0 (low) 1 (high) - and check it immediately. The app shows the breadboard, complete with 14 LED pins.
You can drag and place the wires in the correct positions to connect to Arduino. If the wires are placed according to the code, then it will show the expected results. Once satisfied, you can save the tested code and email it. The code can be copied and used in an actual project just as easily.
More details:
This app comes with several options:
Blink LED: The simplest thing you can do with an Arduino is to see physical output: to blink an led.
With this app, you can customise the given code, upload and execute the program to get the blinking LED.
Digital Pins: Digital pins come in two state, either ON or OFF state. An ON state is HIGH (1) and OFF state is LOW (0).You can use these digital pins either as input or output pins. Use the function pinMode() to configure the pins either to INPUT or OUTPUT. The default mode is INPUT if you do not specify them using pinMode().
Arduino and LCD: Describe and simulate the working of LCD display with examples.
Arduino and motors:Describe and simulate the working of different motors such as dc, servo and stepper motor.
LED Matrix: A setup, that can work as a 8x8 LED matrix driver.
Touch Sensor: A circuit that can sense the touch.
Tone Generator: Describes a setup for create midi tones using arduino.
Arduino Piano: You can create, program and play piano keyboard.
Seven Segmented Display: Describes how to control a seven segmented display using arduino.
Arduino and light Sensor (ldr): Read the output values from an ldr and according to that, controls an LED.
Ultra Sonic Distance Sensor: A setup for finding distance from a point using arduino and ultrasonic distance sensor.
Arduino and PIR sensor: Describes and demonstrates, how we can connect a PIR sensor to a microcontroller board (arduino) and the response according to a motion near to it.
Note: You cannot add your own lines of codes into the arduino. You can only edit the specific parts of the given codes.
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Apple iOS 10.x (iPad), Apple iOS 10.x (iPhone), Apple iOS 11.x (iPad), Apple iOS 12.x (iPad), Apple iOS 12.x (iPhone), Apple iOS 4.0.x (iPhone), Apple iOS 4.0.x (iPod Touch), Apple iOS 4.2.x (iPad), Apple iOS 4.2.x (iPhone), Apple iOS 4.2.x (iPod Touch), Apple iOS 4.3.x (iPad), Apple iOS 4.3.x (iPhone), Apple iOS 4.3.x (iPod Touch), Apple iOS 5.0 (iPad), Apple iOS 5.0 (iPhone), Apple iOS 5.0 (iPod Touch), Apple iOS 6.0 (iPad), Apple iOS 6.0 (iPhone), Apple iOS 6.0 (iPod Touch), Apple iOS 7.0 (iPad), Apple iOS 7.0 (iPhone), Apple iOS 7.0 (iPod Touch), Apple iOS 8.x (iPad), Apple iOS 8.x (iPhone), Apple iOS 8.x (iPod Touch), Apple iOS 9.x (iPad), Apple iOS 9.x (iPhone), Apple iOS 9.x (iPod Touch), Apple iPhone OS 3.1.x, Apple iPhone OS 3.1.x (iPod Touch), Apple iPhone OS 3.2.x (iPad)
Similar Software:
Video Laser Level Video Laser Level - This unique application utilizes the iPhone 3.1 Video Overlay support to position virtual red laser lines over your live video.
The laser lines can be used to correctly align and level objects like picture frames, furniture, etc
seeLevel seeLevel - seeLevel is an augmented reality clinometer that let you measure angles of objects viewed through the camera. This greatly increases the the usability of the iPhone as a Clinometer/Level
Clinometer Pro (Inclinometer) Clinometer Pro (Inclinometer) - Finally a quality Inclinometer or Clinometer.
An inclinometer or clinometer is an instrument for measuring angles of slope (or tilt), elevation or inclination of an object with respect to gravity
Seismometer Seismometer - Measure everything that vibrates, shakes or moves. Or why not an actual earthquake?
Seismometer uses your iPhone's built in accelerometer to measure movements in two axes, calculate the resulting energy and draw the results on a rolling logarithmic scale.
What's New in This Release:
· iPhone 5 support
What's New in 2
Arduino Simulator Full Pack Arduino Simulator Full Pack - 85% of the Arduino Kit buyers just play with sample codes! Here is a "ready go" app that gives you the same feel of a fully assembled Arduino Kit!!
Change the pre-defined values in the code to see leds blink, play with additional modules like LCD Screen, Stepper Motor, Servo Actuator and DC Motor
A Metal Ruler A Metal Ruler provides on screen measurements with reasonable accurate readings. Just place an object on the screen then slide your finger on the screen to move the ruler to the length of the object. The measurement is indicated in Analog and Digital using both English and Metric Units
Linpack (iPhone/iPad) Linpack (iPhone/iPad) - The LINPACK Benchmarks are a measure of a system's floating point computing power. They measure how fast a computer solves a dense N by N system of linear equations Ax = b, which is a common task in engineering. The solution is obtained by Gaussian elimination with partial pivoting, with 2/3A·N3 + 2A·N2 floating point operations
Caliper Pro Caliper Pro - Finally a portable ruler or caliper that looks nice and has plenty of functionality.
A caliper (British spelling also calliper) is a device used to measure the distance between two symmetrically opposing sides.
This digital caliper shows results in inches and centimeters (cm-mm)
Builder Pro Builder Pro includes over 400 formulas used by builders
Other Software by developer «Schogini Systems»:
Hey Diddle Hey Diddle - Hey Diddle is an enchanting narration of the classic nursery rhyme for the preschool, bedtime or on the go for children. Illustrated with beautiful graphics, scenes and voice recordings, kids will enjoy listening to this delightful poem again and again
KHET KHET - KHET is a game that combines lasers with classic strategy. Players alternate turns moving Egyptian-themed pieces having two, one or no mirrored surfaces. All four types of pieces (pharaoh, anubis, pyramid and scarab) can either move one square forward, back, left, right, or diagonal, or stay in the same square and rotate by a quarter twist
Itsy Bitsy Spider Rhyme Itsy Bitsy Spider Rhyme - Itsy Bitsy Spider is an enchanting narration of the classic nursery rhyme for the preschool, bedtime or on the go for children. Illustrated with beautiful graphics, scenes and voice recordings kids will enjoy listening to this delightful poem again and again
Red Riding Hood - 3D Parallax Red Riding Hood - 3D Parallax - Interactive, learn to read story for your kid. Let your toddlers imagination grow with this simple animated story
3D Globe Pro 3D Globe Pro - An amazing way to twirl the world!
This 3D globe can be rotated with a swipe of your finger. Spin it to the right or left, and if you want it closer zoom in, or else zoom out
Bulls N Cows Bulls N Cows - A fun mind puzzle that uses logic to challenge your thinking. Pit your brains against the computer with this math game.
It is adapted from an old code-breaking paper and pencil game for two players that may date back a century or more, but is still considered a challenging game. It is sure to keep you engaged for a long time
Arduino Simulator - Full Pack Arduino Simulator - Full Pack - 85% of the Arduino Kit buyers just play with sample codes! Here is a "ready go" app that gives you the same feel of a fully assembled Arduino Kit!!
Change the pre-defined values in the code to see leds blink, play with additional modules like LCD Screen, Stepper Motor, Servo Actuator and DC Motor
