Zevele's Blinker - This application blinks the device LED every few seconds. The idea is to have some notification that the device is still alive.
· Blink the LED every few seconds. If the battery level is below the threshold, orange led is blinking otherwise the green on is used.
· If the radio is turned off or there is no signal, another orange blink occurs (in addition to the regular one).
· When the phone is charging the orange LED lights constantly, every few seconds a sequence of green blinks according to the batter level occurs (20-40% - 1 blink, 40-60% - 2 blinks, 60-80% - 3 blinks and 80-100% - 4 blinks). If the battery is fully charged - the green led lights constantly.
· Blink interval and length can be set via the registry.
· Running the link once starts the application, on blink sequence occurs. Running the link again shuts the application, off blink sequence occurs.
· Blink sequence for the normal, low battery, no-signal, on and off blink sequences can be set via the registry
What's New in This Release:
· Fixed issue where Blinker halts at midnight.
What's New in 1.6:
· Fixed issue where custom LED id's were not saved.
What's New in 1.3:
· Blinker can now use the notification system instead of directly check the Stores. This can be configured in the setting, under "Use WM Notifications".
· Blinker can be configured to load on startup from the settings window.
· Improved performance.
· Some minor interface improvement to the settings dialog
What's New in 1.2:
· Added possibility to set the green/orange LED id.
· Added possibility to set the SMS store name.
· Improved error handling in case SMS store is not found
What's New in 1.1:
· Added notifications for new message (SMS/EMail/Voice), missed calls and wireless status.
· Added possibility to blink the keypad light as-well.
· Added separate delay interval on new message or missed call.
· Tweaked the unattended mode. The halting problem still exists, but it seems better now.
· Added a configuration utility. To run it press the Blinker shortcut again (after blinker is already running).
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 2003, Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
Backstep Backstep - This is a simple utility that will toggle the backlight of a Compaq iPaq from Off-Low-High-Low-Off each time it is run. There is no user interface, it just does its job and exits. I have assigned it to the record button on my iPAQ, so that I can easily toggle the backlight off and on whenever I wish
BacklightTimer BacklightTimer powers off your PocketPC display for a set time interval. Select the hours/minutes and tap the button to power off your PocketPC display. Once the timer has finished the program will turn on the display. NOTE: You can also press the 'On' button on your device to power on the display
Pocket Flashy Pocket Flashy-this 15 KB utility can help your friend identify you in a dark big party hall. Just Start the application and it will start flashing in various colours in the client area of the screen. Just a touch with your finger on the screen will stop the flash. Touch again to continue the flash
ColorPicker ColorPicker - An amusing freeware that will let you personalize every one of your screens, without exception, by modifying the color of the components you want (title bar, menu backgrounds, etc...), like the Appearance tab of Windows Display Properties.
Also there are schemes available. In short, everything you need to see life through ... rose-tinted lenses
Keylight Activate / Deactivate the keyboard LEDs on Treo 700w/750v, HTC TyTn, MDA Pro, MDA III and others
PowerOptions PowerOptions is a software for HTC devices that allows you to easily soft reset, shut down, turn off backlight and put the device into standby mode.
A high priority was to use only "safe" functions, which will not harm the device. The shutdown method for one is the same HTC uses
disCali disCali - disCali disables the "Align Screen" that pops up whenever you press the middle D-PAD button + Message Button.
Instructions:
1. Install the cab.
2. Run "disCali" form Start Menu > Programs, this will disable the align screen function from your entire device until soft-rest (even from the control panel).
3
BlackMe BlackMe is a tool that turns the screen off while you don't need it.
You can use it while logging gps data (for example with WMMiniGPS), when you connect your device to the desktop to sync/recharge it, when you're listening to music with an mp3 player, etc...The best method to use this program is to associate a button to it (through Settings->Buttons)
GfxBoost GfxBoost - activates "QTV" mode for specific surfaces. This makes for example DirectDraw display smoother and: a bit slower or significantly faster, depending on how you look at it. It also seems to have a small effect on Direct3D/OpenGL.
This is a bit tricky! If you will benchmark it the result will be lower FPS. However, it will actually appear faster
CrystalBall CrystalBall - This program displays a glowing colour crystal ball on your PocketPC. It can be used by palm readers and future predictors that use a crystal ball.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
Other Software by developer «Zevele»:
Zevele's SimplePiano Zevele's SimplePiano - A simple piano application for Windows Mobile.
· WVGA, VGA, QVGA, HVGA versions.
· It has three octaves.
· Record and Playback.
· Dualtouch via the PinchToZoom events
· Customizable skins.
· Customizable sounds (currently include Piano, Acoustic Guitar & Violin)
Zevele's AutoLoudspeaker AutoLoudspeaker is an application that will automatically turn on the loudspeaker when the phone is away from the ear, and turns it off when it is near the ear.
AutoLoudspeaker is fairly simple to use. When running the application a service starts. If the shortcut is pressed again, a notification message pops and the user can choose to close the service
