Ep Detect is an accelerometer based mobile phone application that uses advanced signal processing to detect epileptic seizures. It runs on most mobile phones that support SMS messaging, movement detection and GPS position location.
The addition of the seizure detection signal processing enables the phone to function as a wearable seizure detection system, with remote signalling to carers. Epdetect monitors the wearers movements, distinguishing between normal movement and movement associated with a Tonic–clonic seizure. If a seizure is detected, Epdetect will contact your carer with your status and GPS position.
Epdetect will monitor the movement of the person while the phone is in their pocket or worn on a belt. The software will differentiate the movements associated with epilepsy from normal movement.
When a seizure is detected it will warn the person that it is about to send an SMS message to a carer, in the case of a false alarm the person will be able to cancel the SMS alert. The SMS message contains time, GPS coordinates (if the phone has GPS) and a short message, allowing the carer to raise the alarm and take remedial action or call an ambulance. When the person recovers they press a button to cancel the alarm, which will initiate an end of emergency SMS message.
The Epdetect user interface screens:
* Status Message – A "Seizure Detected – press the clear button for 5 seconds to cancel" message will be displayed.
* Audible Alarm – An audible alarm will sound immediately upon detection of a seizure.
* Count Down Timer – A countdown from 30 seconds will be displayed to enable the user to press the cancel button prior to sending the outgoing SMS alert. The countdown timer is adjustable from 1- 60 seconds.
* Clear Button – A large "clear" button graphic is displayed to allow the user to clear the detector active status, which also cancels any outgoing SMS alert. The "clear" button must be pressed for 5 seconds within 30 seconds to prevent the outgoing SMS message.
Alarm Active Screen:
* Status Message – A "Seizure In Progress – press the cancel button for 5 seconds to signal the end of a seizure" message is displayed.
* Audible Alarm – A second audible alarm will continue to play until the alarm active status is cleared.
* Cancel Button – A large "cancel" button graphic is displayed to allow the user to clear the alarm status, which also causes an end of seizure SMS message to be sent. The "cancel" button must be pressed for 5 seconds to cancel the alarm active status.
* Additional Message – A message saying |This person may be having an epileptic fit" will be displayed on screen.
Advanced Options Screen:
* Back-Up Accelerometer Data – Tick box, which if ticked saves the raw accelerometer data that caused the last alarm condition to a file.
* GPS On/Off – Tick box, which if ticked activates the phone’s GPS to generate location information, which is appended to SMS messages.
* Carer No 1 – The mobile phone number of the first carer, this number will receive an SMS message if an alarm condition is active.
* Carer No 2 – Optional, the mobile phone number of the second carer, this number will receive an SMS message if an alarm condition is active.
* Carer No 3 – Optional, the mobile phone number of the third carer, this number will receive an SMS message if an alarm condition is active.
* Alarm Message – The SMS message that will be sent when an alarm is active.
* Cancel Alarm Message – The SMS message that will be sent when an alarm is cleared.
* Detector Active Sound – Selects the warning sound to play when the detector is active.
* Alarm Active Sound – Selects the sound to play when the alarm has not been cancelled (could be an audio file such as; "Help this person is having an epileptic seizure").
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
CodeLogs CodeLogs - This program can be used by emergency staff when treating a person for a heart attack.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
FakeSmoke FakeSmoke - If you quit smoking then use this program when you have the urge to smoke rather then a smoke.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
DoctorsSuggestions DoctorsSuggestions - This program can be used each time you see your doctor. Add a new entry and record up to 60 seconds of your doctors advice.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
SmokeBeeps SmokeBeeps - This program can be used when you quit smoking. Each time you smoke tap the button and the program will 'beep' the number of times you smoked for the day. This prevents chain smoking.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
EmailerSmoke EmailerSmoke reports the times when you smoke via Email in real time. Each time you smoke tap the button and the program will send an Email to the preset address to your doctor or quit smoking nurse with the date/time and last date/time you smoked. NOTE: The program places the Email in your OutBox if you are offline
DrinkFacebooks DrinkFacebooks - DrinkFacebooks allows a doctor/nurse to track the patients that are using the DrinkFacebook. You can make categories of patients and for each patient the Facebook PID users code and token. When you tap on the sync button the program will download all of the patients drinking logs. This service is provided by FaceBook
NosePicker NosePicker - This program is for plastic surgeons to give their patients a choice of different types of noses.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
FacebookSmoke FacebookSmoke allows you to update your Facebook app status of the times when you smoke. You can use this to allow a doctor or nurse to monitor the times when you smoke. Each time you smoke tap the button to update FaceBook status. This service is provided by FaceBook
SmokePause SmokePause - This program can be used to help you quit smoking. When you feel like smoking tap the button and enter a number if minutes. Wait until the timer is done to see if you still feel like smoking.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
HeartSounder HeartSounder - HeartSounder is a Windows Mobile app which can be used to slow down or speed up a person's heart using sound.
Simply place the headphones of your mobile device on the patient's chest and choose the desired heart rate (in Beats per Minute). The app will generate a heart beating noise and stimulate the heart
Comments on Ep Detect:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Ep Detect is compatible with your device Asus P560
