Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
DevState DevState - This is today plug-in for Pocket PC 2003 and Windows Mobile 5.0. This enables to add mainly 3 functions on your today screen like below:
- Displays Memory/Storage status.
- Displays Battery/Power status and it has following function.
>> Soft reset.
>> Turn off your device
Awady ScreenOff A small handy tool to turn off your Pocket PC screen without turning off the device itself
VoiceHiding VoiceHiding is a voice recorder that turns off the display when recording (hidden recorder). Select 'Record Hidden' from the toolbar and the program will start the voice recorder and power off/disable the display. Press the power button to view the display and stop the recorder. NOTE: It is illegal to record a person without permission in some countries
Kai's Flash Light Kai's Flash Light - Use your Pocket PC as flashlight in the dark
Any color selectable
Adjust Brightness
Fullscreen and clear screen (without buttons)
New: Lightning Background in any interval from 100 ms to 5 sec.
Device don't Power Off!
System requirements:
Pocket PC 2000, 2002, Windows Mobile 2003 & SE, 5.0, 6
CrystalBall CrystalBall - This program displays a glowing colour crystal ball on your PocketPC. It can be used by palm readers and future predictors that use a crystal ball.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
Gyroscope Gyroscope - This program displays a flashing circle that you can adjust the speed.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer. For free support on installing email me
Firecracker Firecracker - This program is a firecracker with 5 second fuse.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer. For free support on installing email me
Easy FlashLight Easy FlashLight is a simple utility the turns your Windows Mobile device into a flashlight. Easy Flashlight has built in controls to change your backlight settings. With full screen several fun silhouettes you can make being caught in the dark fun
Pocket PC Mirror 3.2 Pocket PC Mirror 3.2 - Great for a quick rearview mirror, especially in those cubicle situations. Also good for a last minute checkup before those pesky board meetings. Either way, it's a another great application from Pocket PC Advantage
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device Axia A308
