DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
AppLock Theme Blossom Flower AppLock Theme Blossom Flower for Super AppLock - Privacy Holder! Please install Super AppLock
Flashlight Z Flashlight Z - Super Flashlight instantly turn your phone into a bright flashlight! The fastest, brightest, and user user-friendly flashlight. Blinking Mode is also supported and you can easy to adjust the frequency. Features: - Very good flashlight. - Easy and fun. - Blinking Mode supported and easy to adjust the frequency
死點復修器 Dead Pixel Fixer 死點復修器 Dead Pixel Fixer - This simple app is to try to fix any dead pixel in your Android device. Just tap on the dead pixel to proceed the recovery. It stimulates the screen region with flash. Keep your device wake up mode and screen on, let the flash square runs for about 15~30 minutes, the pixel can be repaired. It is free for use
Neon Flash Light Instruction & Feature:
Camera Lamp Light - Uses your phone's camera Light to emit bright light. Note that some devices don't have a camera torch light. In this case the LED Flash Light option will be disabled
Nightlight Free Nightlight Free - Use your Android phone or tablet as a nightlight to illuminate your rooms and hallways. This app display a white screen so that your mobile device acts as an ambient nightlight. You can also use it as a lantern to walk in the dark. App keeps your phone awake and full-bright while this app is running in the foreground
Fingerprint Keypad Lock Screen 1 Fingerprint Keypad Lock Screen 1 - Best feature and what makes this app different than others is the keypad option. You can use a passcode as a backup (or use it by default) to the fingerprint scanner. Just set up a passcode at first launch and you are all set, the app will grant access if the right passcode is entered
My Bright LED Flashlight My Bright LED Flashlight - Enjoy Free Super Bright LED Flashlight with Super Flash feature and Lamp options
Get the Newest and Brightest LED Sleak and Esy to use Flashlight on the Android Market.High Res Flash
#1 flashlight application on the Android Market is now yours for free.
Save your money on expensive flashlights and batteries
SuperDim SuperDim - This requires root privileges on your device and a backlit LCD screen (not OLED).
SuperDim lets you dim the display to very low levels--lower than the OS normally allows (that's why you need root privileges)--to save night vision. This will be particularly useful for serious amateur astronomers.
On some devices you can also turn off LEDs (e.g., power LED)
AdjBrightness AdjBrightness - Adjust screen brightness for *rooted* Android devices. Set the value from 2 ~ 255 just as you like. Auto restore brightness after screen on. Also can lock the brightness
Other Software by developer «leppie»:
not found
Comments on DHD Proximity Sensor Recalibrator:
papa beat:
I hope it wprks
Date: 9 Oct 12
HKG:
This app doesnt work with Sony Ericsson Arc S. Error: "Kernel not supported" -ps_kadc not found.
Date: 9 Nov 12
anil:
sensor
Date: 10 Dec 12
Jawad:
his app doesn't work with sky vega a830L Error: "Kernel not supported" -ps_kadc not found.
Date: 30 Apr 13
jpmurf:
Doesn't work on LG G2 D800 "Kernel not supported" -ps_kadc not found.
Date: 5 Aug 14
deepak:
in lava xolo a600 "Kernel not supported" -ps_kadc not found. same issue
Date: 7 Dec 16
If you noted an error or download link is broken, please, report it via this page or use comments.
DHD Proximity Sensor Recalibrator is compatible with your device BenQ A3c
