hobDrive is an intelligent trip computer which utilize OBD-II link (USB or Bluetooth) to fetch and analyze vehicle data in realtime.
· Concentration on trip data: MPG, distance run, total fuel consumption, run time, time spent in jams, etc.
· Precise MPG (fuel consumption) analysis and calculations.
· DTC reading, explanation, and clearing
· Sensor data logging facilities for data review.
· Fine grained touch-friendly fluid UI
What's New in This Release:
· New UI Gauges: colored bar, colored round speed bar, improved chart gauges.
· Configuration dialog to setup look and feel of UI Gauges.
· New dialog to enter maintenance records.
· New screen "Events and Fillups" with data analysis and review abilities. Trial HOBD is limited with latest 12 records analysis.
· Extended warnings tracking: hobdrive raises a warning if it finds MIL active, engine overheat or bad fuel trims values. hobDrive now indicates detected errors and warnings with icon and sound (full version only)
· New sensors: - Turbocharger Compressor Inlet Pressure A/B - Exhaust Pressure B1/B2 - Turbocharger RPM A/B
· Sounds added for successfull connection and disconnection events
· Reconnection Time intervals are now configurable.
· New option (disabled by default) to suspend device after hobdrive detects the external AC power was detached
· HOBDrive now can connect to tcp-streamed ELM327 adapters (f.e. WiFi ELM327)
· Option "Keep taskbar" is now enabled again by default (caused problems with not visible low area with buttons on some devices) In case you see an empty space at the bottom of the screen on your device (taskbar area), you may disable this option explicitly to allow hobdrive use this area.
· Workaround for possible unexpected system date change (statistics totally screwed if that happened)
· Improved "keep backlight" support (should work on WM6)
· Fixed possible hangup on very long trips (> 3 hours)
· UI Gauges and charts are now work fast even on lowend devices.
What's New in 0.9.0:
· New settings UI screens. Connection settings, Expert options Settings, Vehicle Settings
· Visual Theme setting is now separated for day/night. Automatic switching is performed (hobdrive only).
· "About sensor" (long tap) screen is improved with extra details.
· Fillup form allows to enter odometer values both in miles/km.
· New experimental option to enable vibration feedback when clicking
· New option to start hobdrive minimized
· New option to disable animations in user interface (for slow devices)
· Included BT support for devices with Widcomm chipset.
· "All Sensors" page is now more compact. Sensor descriptions are removed but available in detailed sensor information dialog by clicking on any sensor's value
· New sensors for lambda values and extended range oxygen (PIDs 0x24-0x2B)
· A number of new themes added
· hobdrive now restores last active screen upon startup
· Fuel and fillup forms now works in currently selected units (metric/imperial).
· Fix in hobdrive where it didn't restored itself upon second rerun.
· Fix in hobdrive fuel related calculations (for some values hobdrive wrongly assumed you always fillup a full tank)
· Fix in DTC descriptions readout (many of available descriptions were not read)
· Fix in hobdrive: now Max value sensors are calculated always correctly
· Log file is now truncated after reaching big (1Mb) size
What's New in 0.8.0:
New features:
· Strong usability improvements: navigation top bar, buttons improvements, better performance.
New screen “Fuel Details” (hobdrive only):
· Fuel economy and consumption in jams/idling, its price
· Total fuel price
· Fuel consumption on a cold engine
· Fuel economy on a hot engine
New screen “Trip details” (hobdrive only):
· Fuel level calculations
· Fueling records tracking
· Odometer tracking
· Average and max speed
· Distance and time on remaining fuel
Minor updates:
Improved sensor output:
· No overlapping
· Time values now separate hours and days
· Floating values now automatically change precision
· border-opacity gauge attribute allows to define borders
· Sensor list screen now includes detailed sensor descriptions
· New PIDS: lambda, baro pressure. Fuel pressure fixed.
· Long Tap (Hold) on any of sensors now raise detailed screen with sensor description
· Screen switching with joystic keys or with navigation bar sections.
· Light theme now has background picture, other improvements to use it when sunny.
· When selection Bluetooth device, a new dialog appears with PIN code request
What's New in 0.6.8:
Major improvements:
· DTC readings on CAN vehicles are now correct, all available ECU codes are displayed
· Autoupdate functionality (Settings -> Network)
· Improved “Clear DTC” button usability, confirmation added
· Added “First Run” message and open port settings automatically on first run
· Sensor data tracking functionality (disabled by default)
· New OBD-II sensors on “Sensors” extra page are available (voltage, fuel rate)
Minor changes/bugfixes:
· Improved status line output
· Fixed rare exceptions on win32
· Screen orientation is now restored on exit
· UI changes: Short term fuel consumption on “General” page is replaced now with “Battery Voltage”
· UI changes: Diagnostic screen is hidden by default (available from “Settings” -> “Screens”)
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 2003, Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
TopSpeed TopSpeed calculates the top speed of your motorcycle in any gear, calculate lobe centers, calculate changes in compression ratio after changing bore and/or stroke
DSSTest Private Pilot Exam for Pocket PC 2003 DSSTest Private Pilot Exam for Pocket PC 2003 - You''ll love our FAA Knowledge Exam Study Software for Pocket PC 2003! Databases for the Private, Commercial and Instrument Pilot exams are available
Pocket Prof: Private Pilot Questions Pocket Prof: Private Pilot Questions - No one seems to have enough time these days. This makes it a challenge for student pilots to find time to study for the FAA Knowledge Test or for licensed pilots to prepare for their next biannual flight review (BFR)
Fuel Control Fuel Control is the power tool to keep the record of your fuel consumption. And able to record fuel cost, distance, fuel quantity, ..etc. Easy to manage the log and able to enter in the multiple unit (e.g. US Gallon,Mile,Kilometer,Litre). It help you to save and control the fuel cost by showing the efficiency and statistics data of your cars
R-DAS Pocket PC software for the AED RDAS flight computer
gPC (gMeter) gPC (formerly known as gMeter) is a mobile application that turns the HTC Touch Diamond/Pro into a vehicle performance computer, by using the onboard accelerometer in these devices.
gPC can measure forward and lateral g forces and it can calculate the Horsepower of a vehicle (wheels or engine), using the device's internal GPS
Meter Minder for Pocket PC 2003 Meter Minder for Pocket PC 2003 helps you avoid those dreaded and costly parking tickets.
First select an advance warning time of 5 to 30 minutes, or None, using the Warning Time selection box.
Check the audibility of the alarms
Odometer Recorder Odometer Recorder is a tool that can track your business or personal trip mileage and let you know how much you‘re driving when and for what purpose
Auto Mileage Tracker for Pocket PC 2003 Auto Mileage Tracker for Pocket PC 2003 - Over 300 copies sold for Pocket PC 2002!
Perfect for those who get reimbursed for their mileage
SmartLOG PPC SmartLOG PPC is an interactive Pilot's Logbook designed as a practical aid for Recreational and Professional pilot's for loging, viewing and printing your flying hours. There is nothing more most pilots hate than to fill in and summarize their Logbook no more do you have to SmartLog will do it all for you
Other Software by developer «hobDrive»:
not found
Comments on hobDrive:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.