TiltLander is a simple project to demonstrate accelerometer use in Android. It's just the Android Lunar Lander demo, with the accelerometer hooked up to control the tilt of the lander.
How to play
You have to land the lander on the landing pad, which is shown as a green line at the bottom of the screen. (The actual position changes at random.) Sounds easy, but:
* You must be moving slowly -- see your speed at the top middle of the screen
* You must be reasonably level
* You must be completely on the landing pad
You can control your descent by firing your engine. The engine always pushes you in the direction you are pointing, so by tilting the lander, you can also control your side-to-side movement. But watch out -- fuel is limited. Your fuel state is shown at the top left of the screen.
You can fire the engines by pressing the trackball button or touching the screen; control the angle of the lander by tilting the phone. But note: rotating the lander does nothing in itself; to move sideways, you need to point in the direction you want to go and fire the engine.
What's New in This Release:
· Allow install to SD card.
Like it? Share with your friends!
Supported operating systems:
Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
My paid app My paid app - is a manager of applications bought from Google market. This application will remember and sort out paid applications and will make the work with market easier for a user in this way
Sensors multitool Sensors multitool - is the main tool to get data on your mobile device sensors. With this application you can learn all information about any sensor on your device. Moreover, the information is displayed by means of convenient graphs
Servers Ultimate Servers Ultimate - is an application which can start various servers on your mobile device. Servers support all available fuctions so as soon as you install it you can add users and change settings. All data is stored at the external memory and don't take main memory of the device
Network analyzer Network analyzer - this application contains a set of utilities for getting information on network connection, including network scanner, port scanner and independent speedometer. Requests and reports on performed actions made before will be saved and further can be copied, printed or transferred by email or messaging
WMD-RegInfo Widget for Androkkid WMD-RegInfo Widget for Androkkid - This little widget was started to display information from the registry. And a second question for a widget to show the current appointment could be fit into this as well
Simple system monitor Simple System Monitor - real time mode monitoring of the resources of your smartphone. This application will show you many different kinds of data in real time. This utility offers many functions and it will gladden those who want to know everything about their device. It is rather easy to handle it with all that
Smart System Info Smart System Info is a great minimalistic system information app for your Android device! Just system info that you need, nothing more. Simple, elegant and fast
Super Status Bar Super Status Bar
Super Status Bar free mobile application allows you to change the default status bar without using ROOT rights for Android. Create your own personal status bar. Cool drop down panel, with notifications, recent apps, toggle and room for a widget
Internet Booster Internet Booster - Internet booster undoubtedly saves you time, when you open an internet page. The Internet booster optimizes the data of your device’s traffic. It doesn’t matter if you use 2G, 3G, 4G, Wifi, Bluetooth or any other connection with good or poor signal
2G-3G OnOff 2G-3G OnOff - Simple widget (1×1) for changing network mode.
It's a shortcut for network system settings which allows you to change 2G-3G and data roaming mode with only 2 clicks instead of 4.
What's New in This Release:
· Icon fix for 1.5 and 1.6
· Now you can center icon, when label is off
Other Software by developer «Moonblink»:
Touch Test Touch Test - Shows display parameters, multiple touch points, and trails to let you see how linear your touchpanel is. Different hardware supports 1, 2, or more fingers -- see which yours is. Note Android before 2.0 supported only single touch. Please see the help for more info
Dazzle Dazzle is a configurable switcher widget for Android devices; it allows you to create one or more switcher widgets, in four sizes, with your choice of controls. You can choose from WiFi, Bluetooth, GPS, airplane mode, and brightness controls; on supported devices, brightness lets you toggle between auto and manual modes.
· Four widget sizes
Chime Timer Chime Timer is a simple, configurable timer app, with nice chime sounds. It lets you create up to four timer configurations, each of which can have a pre-timer, a start bell, and an end bell.
Chime Timer keeps running in the background even if you navigate away to some other app; so you can play Scrambled Net, for example, while you're waiting for whatever it is
Audalyzer Audalyzer is a simple audio analyzer for Android. It displays sound readings from the microphone as a waveform display, as a frequency spectrum, and as a dB meter. dB levels are relative to the maximum input level of your device
Test Card Test Card - A very simple screen test card for Android. Designed to allow you to view the structures of pixels under magnification. On many phones this will be totally uninteresting; on some, notably AMOLED displays, it may be more useful. Please read the help for more info
TouchTest TouchTest is a simple Android application to test screen parameters and multi-touch.
The application displays a 50-pixel grid which illustrates the screen sizes, and edge markers to check the registration of the screen edge with the surrounding bezel
Tricorder Tricorder - A simple tricorder simulator for Android powered phones, using real sensors to detect magnetic fields, gravity, etc. See the passing gravity wave from a distant collapsar on your phone screen (actual device sensitivity may be insufficient to detect gravity waves). Detect buried powerful magnets! Be a mega-geek! Etc
Scrambled Net Scrambled Net - NEW: personal high scores, animations, and auto-solver. See menu to turn animations off. You are given a computer network with the connections all scrambled; rotate the tiles to connect all the terminals to the server. See if you can make your way through the 5 difficulty levels. Please see the in-game help
Substrate Substrate - This application contains a collection of live wallpapers for Android. Once installed, you can install any of the wallpapers on your desktop in the usual way. The package also contains a runnable application which previews all the wallpapers and provides access to their settings
