DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Fake screen Fake screen - is an application which forbids other people see the current application in your mobile device. First of all this application was designed for automatical turning/hiding of a game
Tiny Torch - Flashlight Tiny Torch - Flashlight - Simplest and lightest flashlight app ever of just 2.2mb. No irrelevant things in the application. Just the app needs camera permission to access the flashlight. Just On and Off button to use the flashlight
死點復修器 Dead Pixel Fixer 死點復修器 Dead Pixel Fixer - This simple app is to try to fix any dead pixel in your Android device. Just tap on the dead pixel to proceed the recovery. It stimulates the screen region with flash. Keep your device wake up mode and screen on, let the flash square runs for about 15~30 minutes, the pixel can be repaired. It is free for use
Brightest Flashlight FreeTM Brightest Flashlight Free - Turns on all available lights. Brightest Flashlight App – Free of Charge * Turns on all available lights on the device * Camera Flash LED at Maximum
Love Zipper Lock Screen Love Zipper Lock Screen - Love Zipper Lock Screen will let you protect your phone in a unique way. We give you the possibility to unlock your phone with specially prepared zippers. It’s easy to use – after activating your phone simply unzip the zipper and you will unlock it
WechatLock WechatLock - Get the ultimate locking app to lock your Wechat app ! Wechat Lock will securely lock all your Wechat app to secure your private conversations from unauthorized access
iBulb Swing the phone upward to turn on/off the light
Android Flashlight FREE Android Flashlight FREE - Turn your Android phone into a flashlight using the device's camera LED. Simple, fast and elegant.
The app has been tested to work with: Samsung Galaxy Nexus, Samsung Galaxy S II, Samsung Galaxy W, Samsung Galaxy Note, Samsung Nexus S, LG Optimus 2X, Motorola Droid II, HTC Wildfire, HTC EVO 3D, HTC Desire
Light On Light On - One of the simplest torch utilities. No extra useless options, just turn on/off you camera led and use it as torch.
Your phone must have a camera with a flash.
App has been tested on Motorola Defy
Other Software by developer «leppie»:
not found
Comments on DHD Proximity Sensor Recalibrator:
papa beat:
I hope it wprks
Date: 9 Oct 12
HKG:
This app doesnt work with Sony Ericsson Arc S. Error: "Kernel not supported" -ps_kadc not found.
Date: 9 Nov 12
anil:
sensor
Date: 10 Dec 12
Jawad:
his app doesn't work with sky vega a830L Error: "Kernel not supported" -ps_kadc not found.
Date: 30 Apr 13
jpmurf:
Doesn't work on LG G2 D800 "Kernel not supported" -ps_kadc not found.
Date: 5 Aug 14
deepak:
in lava xolo a600 "Kernel not supported" -ps_kadc not found. same issue
Date: 7 Dec 16
If you noted an error or download link is broken, please, report it via this page or use comments.
DHD Proximity Sensor Recalibrator is compatible with your device Blackview A7 Dual Sim LTE
