DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
AiFlashlight AiFlashlight - is a multifunctional lighting able to turn your Android device into a flashlight, lighter and even blinkers of emergency services. You can enter text and the application will transform it into Morse alphabet and will send a message by means of light signals
APK Multi Tools APK Multi ToolsThis free App contains Multi Tools for Your Android Phone. You can use Wifi Booster, Compass, Battery Booster, Torch and App Lock in this Latest and Free Android Application
Dead Pixel Tester Dead Pixel Tester - Dead Pixel Tester
This simple app is to test if any dead pixel in your Android device. It fills the entire screen with a single color, allowing the user to easily spot the abnormal pixels that fail to show the color. Just tap anywhere on the screen to proceed to the next test color. It is free for use
Pick-A-Color Nightlight Pick-A-Color Nightlight - Pick-A-Color Nightlight is an easy-to-use nightlight and sound machine. In three simple steps, you can turn on your nightlight and add a little safety, security, and comfort to any room. Here's what to do:
Step 1 - Choose Your Nightlight Color: Use the color wheel to select your favorite nighttime color
Firmus Torch Firmus Torch - Free version of Firmus Torch. Includes all the same features as the pro version, but with ad's. This application allows you to use the torch feature of your phone. It includes both battery and torch widgets. Current features include: - Torch (App + Widget) - Battery Widget Support: http://venaliasolutions
Flash Lamp Flash Lamp - FLASH LIGHT ANDROID APPS
Flash light is the the most useful apps for your device.Increadebly yet it is simple and very useful application.Currently flashlight is the best led light app on the android market.the brightest,fastest and most effective light is enbuild in the android mobile as free apps
LedEffects LedEffects runs as a service and applies different selectable effects to the DPAD ring of Raphael/Diamond phones depending on different events. Optionally notifications can be set for each event.
What's New in This Release:
· bugfixes: the sound checkbox is taken into account properly, the player is terminated properly (timed or when e.g
死點測試器 Dead Pixel Tester This simple app is to test if any dead pixel in your Android device. It fills the entire screen with a single color, allowing the user to easily spot the abnormal pixels that fail to show the color. Just tap anywhere on the screen to proceed to the next test color. It is free for use
Cool FlashLight Cool FlashLight is a simple but powerful application intended to turn your phone into a flashlight.
Cool FlashLight allows you to use camera LED (if supported) or screen with full brightness as flashlight.
Also Cool FlashLight supports animated flashlight.
What's New in This Release:
·
