Categories: Internet & Communications, System Utilities, Travel & Navigation
Upload date: 17 Jun 11
Developer: James Larry Gaines
License: Freeware
Downloads: 1427 File Size: 370 Kb
SmartProtect helps you track and recover your phone once stolen or lost.
Features includes:
1. A Thief or Lost Prevention Software with SMS Auto-Responder and GPS Capability created for Windows Mobile Devices.
2. When you forget your phone and can''t remember where you put it, you can SMS your phone to get the exact location via GPS information if your phone has GPS Capability or approximate location based on Cell Location.
3. You can SMS your phone for other information such as IMSI, IMEI or even remotely reboot your phone etc.
4. This software is also equipped with Thief Prevention system which will automatically SMS your partner phone number if the SIM has been changed against the registered SIM.
5. This software supports registration of Multiple SIM Cards and of Multiple Phone Conctacts as Partners.
6. When your phone has been stolen, it will automatically SMS relevant information such as IMEI, SIM Card Number or IMSI, GPS Location if supported or Cell Location.
7. It is able to also auto-delete Phone Memory Contacts if the phone has been stolen.
8. It is password protected and the password is encrypted with AES-Encryption.
9. Its un-install proof. It requires special procedure to uninstall the protection, so even if you uninstall it, it is still working.
10. It has MortScript support.
Note that Cell Location depends on your device. It should be working but the problem is not all devices interfaces with RIL functionality so it may or may not work.
For testing, kindly use Emulation Mode to determine if the application will work on your phone before using these features:
1. Make Phone Unusable
2. Protected Folders
3. Delete Contacts on SIM Change
Emulation mode will run the protection, however on test mode only and not real mode. Therefore, it will just produce a log file to tell you of the action it is supposed to make (however since its a test mode, it does not do that action). If everything is fine, make sure that after testing, to disable the emulation mode.
This software also can accept SMS Commands from the partner phone so that it can return informations as commanded by you explicitly. Here are the SMS Commands that you can send. Note though that the SMS is only accepted when :
1. The SMS came from a partner phone. (You need to register the phone as a partner phone first).
2. The password is correct. Password is based on the password that you have saved when you configure SmartProtect on your phone. The password is authenticated by the phone once the SMS Command is received.
3. When the SMS Command is correct.
The SMS commands syntax is:
::/[command],[password]
example :
::/getGPSLocation,mypassword
Available Commands are:
getIMEI - Retrieves the IMEI Number
lockMyPhone - makes your phone unusable
enableLockPhone - Enable the Lock Mechanism of your Phone. When your phone is stolen, your phone will become unusable.
rebootPhone - Reboots your phone.
deleteContacts -Deletes your mobile phone contacts. It does not delete the SIM Card Contacts.
unregisterPhone - Unregisters the sender as a partner phone.
disableSecurity - Disables the security mechanism of your phone. This requires restart to take effect.
enableSecurity - Enables the security mechanism of your phone.This requires restart to take effect.
getIMSI - Retrieves the IMSI Number.
alertContacts - alerts your contacts that your phone has been stolen.
getCellLocation - Gets the approximate location based on Cell Tower that your phone has registered to.
getGPSLocation - Retrieves the GPS Coordinates.
exitApp - When you use getGPSLocation command, this application stays in the memory. This command exits the application. However, this applications will still be activated if any of the command is received.
registerPhone - Registers your sender as partner phone number.
listCommands - List the commands available for the Software.
versionInfo - Retrieves the current version of the SmartProtect.
deleteProtectedFolders - Removes the protected folders.
disableEmulation - Disabled the emulation mode.
stopAlert- Stops the alertContacts action.
stopAlert- Stops the alertContacts action.
runPreScript- Runs the pre-action MortScript you've defined.
runPostSCript- Runs the post-action MortScript you've defined.
runAllScripts- Runs all the MortScripts you've defined.
Please follow the procedure below to update the software:
1. From the partner phone. SMS your phone with the command ::/exitApp,[password]. This is to make sure that the SMS module is not loaded in the memory or update may fail.
2. Uninstall the SmartProtect. (optional)
3. Install the latest SmartProtect. If you didnt uninstall SmartProtect, it will ask you if you want to uninstall the older SmartProtect. Just click.
4. Once installed, Run SmartProtect to verify that your settings is still there.
5. Once verified, click either exit or save.
6. You will be notified that there's a need to restart the phone. Proceed to restart.
7. To verify its installed, SMS your phone with ::/versionInfo,< password >. This should yield the latest version.
Please follow the procedure below to remove the software:
1. Uninstall SmartProtect from your Mobile Phone.
2. From the partner phone. SMS your phone with the command ::/exitApp,[password]. This is to make sure that the SMS module is not loaded in the memory or update may fail.
3. Install SmartProtectRemove.CAB to your mobile phone.
3. Run the SmartProtectRemove
4. Enter the appropriate password you've configured for SmartProtect. Click on Remove SmartProtect.
5. Reboot/soft reset your phone.
6. To verify that it has been removed, SMS any commands to your phone. It should get thru now.
THOSE WITH SMS MODULE OF SMARTPROTECT NOT WORKING
Kindly run SmartProtect on Emulation Mode and test by sending SMS commands. The emulation mode works for all commands except for disableemulation, versioninfo and listcommands. Then the resulting log, kindly send to me for debugging purposes. Note that in emulation mode, no SMS will be sent out and all actions are recorded on the log file
What's New in This Release:
· Removed Debug Statements.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
Antitheft SMS Alarm This simple application sends SMS from the thief's phone number with IMSI and GPS coordinates when SIM-card is changed
Spb Kiosk Terminal SPB Kiosk Introduction
SPB Kiosk is an enterprise tool which helps you control how your Pocket PC devices are used. With SPB Kiosk you can lock the device to one or several business applications and restrict usage of any other features like games, multimedia, web browsing etc
BankingPIN BankingPIN - This program generates a random banking PIN number. Tap the button to create a new number. You can select the number length from the toolbar.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
RemoteTracker RemoteTracker is a security system allowing you to control your Windows Mobile devices remotely, using any other mobile phone, sending SMS formatted messages. If your device has a built in GPS receiver, you will be able to use it in several commands.
What can I do with RemoteTracker?
RemoteTracker has a lot of useful objectives
Mobidog Mobidog is a TheftAlert and PhoneSecure software built-in mobile phone. If mobile phone is lost and SIM card is replaced, MobiDog will secretly send alarm messages to the default security numbers to inform the replacement number for the owner to take measure.
Major feature:
1.Theft alert and phone secure
2
Wallet Master (Professional Edition) Wallet Master is committed to your security anywhere anytime...
Wallet Master is a perfect password manager with features to cover all aspects of storing and using sensitive information.
If you have passwords, then Wallet Master will make your life easier
Auto Lock (CSDEVCTRL) Auto Lock (CSDEVCTRL) - This is mainly an auto locking program which utilizes the Windows Locking for partial locking (phone related keys are active) or complete locking (no keys are active)
Cell Spy Software Cell Spy Software is the next generation of spy software which allows you to secretly record all activities of your iPhone, iPad, BlackBerry, Android, Windows Mobile or Symbian OS phone. Cell Spy Software allows you to secretly record all phone activities. Silently record every SMS message. View information about every call (including phone numbers with durations)
Kai's SIM Alarm.Net Kai's SIM Alarm.Net - SIM-Alarm: This function will be activated after power-on and checks the SIM-card. If the device is stolen and the thief inserts another simcards, then it sends a SMS to the phonenumber entered. Content: the phonenumber of the newely inserted SIM-card
Other Software by developer «James Larry Gaines»:
not found
Comments on SmartProtect:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
SmartProtect is compatible with your device Bluebird Pidion BM-150R GSM/CDMA
