LevelSight - This application was originally built to flatten the brightness levels between AC and BATT on the Kaiser, but since lacking a workable front-camera API access, this works out better on devices with a light sensor.
· works with native OEM backlight without extra .NET layer
· history-less sensor-data filtering
· Native C++ and assembly, floating-point-less DSP/SIMD-accelerated math, and extra optimization analysis in Ida Pro.
· No CPU/power-sucking .NET, nor the standard/default software floating-point emulation used.
· takes 1K of ram, 22K of storage
· 0 process slots (runs as a service)
· no notable power-draw (same amount of power ~53mA with service on/off on Fuze)
· polls every ~2000 milliseconds
· no HTCSensorSDK sensor-data lag (~200-300 ms) nor cpu load -- directly accesses the sensor driver
· dll and supporting code are compressed independently of .cab and use cpu's smaller Thumb (16-bit) code when advantageous
· mostly lockless multi-threading
What's New in This Release:
· fix bug where max backlight was clamped to level 5. It now uses the full 1-10 (10 levels) range. Level 0 disabled because not useful.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0
Similar Software:
TouchLockPro TouchLockPro is designed not to interfere with running applications and is a multipurpose locking application. Other locking solutions are often specific for locking only incoming calls/SMS. A lot of locking solutions also place a (transparent looking) Window on top of the running application (e.g
Extended Control Extended Control - Pocket PC Control Panel settings are notoriously difficult to access. Extended Control puts configurable icons on your today screen which provide direct access to frequently used settings.
In addition, there's a running display of used program memory, storage memory and battery strength percentages
VJCandela VJCandela - Turn you phone into a super bright torch!
This program is used to permit control of the flash light on the Universal family of HTC Phones, to allow it to be used as a torch etc.
Note: this may cause damage to your hardware over prolonged periods! I don't see why it should, but use at your own risk
QWERTY Backlight Timeout Changer QWERTY Backlight Timeout Changer - On many of the Windows Mobile devices with hardware keyboard there is no way to adjust the backlight on the keys to your liking. This little application lets you set the timeout to whatever you want
Mobile ScreenTester Mobile ScreenTester is excellent for testing your PDA''s display to quickly find dead pixels. It is simple to use and it is also a very thin application and it is FREE!
G-Light G-Light - Adjust your backlight levels according to the values your light sensor measures.
Because I wasn't satisfied with the automatic backlight adjustment of my Diamond (it was always too bright for my needs), I made G-Light.
With this tool you can adjust your backlight levels according to the values your light sensor measures..
disCali disCali - disCali disables the "Align Screen" that pops up whenever you press the middle D-PAD button + Message Button.
Instructions:
1. Install the cab.
2. Run "disCali" form Start Menu > Programs, this will disable the align screen function from your entire device until soft-rest (even from the control panel).
3
The Tribe 2 for Pocket PC The Tribe 2 for Pocket PC - Life of a hideaway tribal village goes all plain to see. A small thatch hutment is pitched in the jungles beneath a dormant volcano. Nor chucklesome aborigines all rapt in hunting and gathering coconuts, neither you can yawn through the seen. After sunset the neigbourhood resounds with a slam bang clatter of tom-toms
Force High Resolution Force High Resolution - Many applications display poorly on Pocket PC VGA as they don't support VGA mode, but use "double pixelisation". There's a work-around for this problem without having to go to "Full VGA" (as SE_VGA and OzVGA do). But this requires adding a little file next to each specific executable
Other Software by developer «NuShrike»:
KaiserSimFix KaiserSimFix - KaiserSimFix hides the sim contacts. Drop in the cab, run it, it will create an app directory and shortcut into the StartUp directory. Run it directly, or it will run on reboot. It will zero ShowSim on startup, reset it back to 0 in case one "something" decides to flip it back to one again within the next ~1 minute. Then, it will quit out
HideApp HideApp hides the current foreground window in a way similar to the way the OK/Back button does
WirelessNotifyOff WirelessNotifyOff - This is a fix for the broken Wireless Networks detected pop-up in the OEM AT&T FUZE rom that is hardcoded to ON after each soft-reset. Install the cab and it will install the program into the right places to auto-start it after each soft-reset. You are also given the option of running it immediately
Fusion GPS Fix Fusion GPS Fix - FusionGPSFix tries to deal with the anemic GPS on the Raphael, and any other post-WM5 device with slow GPS locking.
This app runs after install, and after soft-reset, and immediately starts up the GPS hardware through the WM5+ GPS API. It waits 5 minutes for a GPS lock, or it quits
