nueLight - nueLight turns your device into a versatile flashlight. nueLight uses the flash LED for the camera and can even enter high-beam mode. nueLight also has a morse code function where it will send text you type as morse code over the flash LED.
To use the locking mode, let go of the app button (default: voice command) and quickly tap the lock button (default: comm manager).
Warning: Overriding the built in safety timer can burn out the flash LED. Use at your own risk.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0
Similar Software:
Backlight Toggle Backlight Toggle - This is a simple utility that will toggle the backlight of a Compaq iPaq on or off. There is no user interface, it just does its job and exits. I have assigned it to the record button on my iPAQ, so that I can easily toggle the backlight off and on whenever I wish
Pocket LAMP Pocket LAMP is the universal program for Pocket PC. The program can turn your pocket computer into a lamp, flash and siren. You can use this program in different situation of your life
NoScreen NoScreen - Shut off your screen whenever you don't need it
VJCandela VJCandela - Turn you phone into a super bright torch!
This program is used to permit control of the flash light on the Universal family of HTC Phones, to allow it to be used as a torch etc.
Note: this may cause damage to your hardware over prolonged periods! I don't see why it should, but use at your own risk
Kai's Flash Light Kai's Flash Light - Use your Pocket PC as flashlight in the dark
Any color selectable
Adjust Brightness
Fullscreen and clear screen (without buttons)
New: Lightning Background in any interval from 100 ms to 5 sec.
Device don't Power Off!
System requirements:
Pocket PC 2000, 2002, Windows Mobile 2003 & SE, 5.0, 6
Extended Control Extended Control - Pocket PC Control Panel settings are notoriously difficult to access. Extended Control puts configurable icons on your today screen which provide direct access to frequently used settings.
In addition, there's a running display of used program memory, storage memory and battery strength percentages
RotateSE270 .NET RotateSE270 .NET - This little program rotates the screen on Windows Mobile 2003 SE devices in 270 degrees. Its perfect to be used in Today Screen Launchers.
THIS TOOL IS FOR WINDOWS MOBILE 2003 SECOND EDITION, PLEASE READ THE REQUIREMENTS BEFORE YOU WRITE A REVIEW SAYING THAT THIS DOES NOT WORK IN ANY OTHER OPERATING SYSTEM
QWERTY Backlight Timeout Changer QWERTY Backlight Timeout Changer - On many of the Windows Mobile devices with hardware keyboard there is no way to adjust the backlight on the keys to your liking. This little application lets you set the timeout to whatever you want
KeypadLedControl KeypadLedControl By default the keypad lights turn off after 10 seconds when the device comes out of standby. This little application keeps the light on while the display is on
Other Software by developer «No2Chem»:
nuePower/nueBattery nuePower/nueBattery - nuePower consists of nuePowerCPL, and a modified power driver (nueBattery) that allows you to view increasing battery power in 1% increments. The power driver is currently available for the Titan and Vogue (i.e. Sprint Mogul, Touch)
nueBattery is available for the CDMA Touch Pro and Diamond
nueClockControl nueClockControl - nueClockControl allows you to change the clock speed of your Qualcomm MSM7XXX(A) based mobile device.
Although overclocking is not possible yet, you can set the frequency of the ARM11 core to the preset ranges between 19.20 MHz and 528.00 MHz for MSM7x01A (384.00 MHz for MSM7x00). Note that Device Information always displays 528.00 MHz or 400
nueSIPStylus nueSIPStylus - nueSIPStylus automatically changes the input method / software input panel (SIP) based on whether the stylus is in or out. Note that you must have a device that comes with a stylus sensor (Touch Diamond, Touch Pro, Touch HD, etc...) for this program to work
nueRecMod nueRecMod - nueRecMod is an updated version of RecMod. nueRecMod recovers files from modules in the format Imgfstools outputs them in (S000, etc). It is based on RecMod by mamaich. However, this version is lighter and properly sets the imagebase, which is especially important when disassembling via IDA
nueSIPDefault nueSIPDefault - nueSIPDefault automatically selects the default input method at startup. It is very lightweight and implemented as a service dll which unloads itself after it is done processing. It also has a configurable wait time to adjust for new versions of Windows Mobile that adjust the default SIP sometime during boot
nueAdvancedProcessor nueAdvancedProcessor - nueAdvancedProcssor lets you change some advanced processor settings such as program flow prediction, unaligned accesses, and the cache replacement strategy on ARMv6 or new processors
nueTTY-Console nueTTY-Console - nueTTY-Console is an utility to communicate with HTC-branded Windows CE devices in bootloader mode. It uses the WinUSB library to communicate with the device. Currently only working in Windows Vista.
WARNING!!!
Some commands can damage or destroy ("brick") your device
nueSlidingKB nueSlidingKB - nueSlidingKB is a system service that automatically switches between keyboards when you slide your Windows Mobile device open. This is convenient so that the SIP does not take so much space when you open your keyboard. nueSlidingKB also comes with a control panel so you can define sliding sound and keyboard parameters
nueKBLight nueKBLight - nueKBLight automatically turns on the keyboard backlight of your HTC Touch Pro when you switch to landscape mode, so you don't need to guess the first button to press anymore when using your device at night.
Note: The exe file in the archive is intended to be run on your phone/device. Copy the exe to your phone/device and run it from there
nueTVOut nueTVOut - nueTVOut allows you to force TV output to be on, and allows use of the TV Out control panel even if you do not have an original HTC Video out cable.
To use the TV Out, you will need the audio dongle (rectangular block) that came with the phone, as well as a camcorder/iPod video cable
