nueClockControl - nueClockControl allows you to change the clock speed of your Qualcomm MSM7XXX(A) based mobile device.
Although overclocking is not possible yet, you can set the frequency of the ARM11 core to the preset ranges between 19.20 MHz and 528.00 MHz for MSM7x01A (384.00 MHz for MSM7x00). Note that Device Information always displays 528.00 MHz or 400.00MHz, so you should use nueClockControl to gauge your current device frequency.
There is also a command line mode:
nueClockControl.exe setting
where setting is a number from 0-7, corresponding to frequencies in the combobox. 7 is 528.00 MHz and 0 is 19.20 MHz. The numbers are different on the MSM7x00 400MHz parts.
Also note that it currently cannot determine the voltage level for non-A parts.
What's New in This Release:
· Added support for MSM7500/MSM7200, Added voltage level form MSM7501A/MSM7201A
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0
Similar Software:
Custom Scroll Custom Scroll - A small and simple application which allows you to customize the scrolling behavior of HTCScroll Windows addon which is used in File Explorer, MS Contacts, Programs, Settings... - everywhere where scrolls are used - and we are using fingers (flick gestures) to scroll..
PocketTweak PocketTweak is a small program for Pocket PC to configure device settings without using any registry editors. That is, PocketTweak is a Pocket PC version of SmallTweak.
The following settings can be configured with the current version of PocketTweak:
To associate Extensions with Applications.
Device power off time.
Window animation.
Menu animation
Windows Media Player Mobile Playlist Maker Windows Media Player Mobile Playlist Maker - Generate .asx playlists for Windows Media Player mobile. Just select a folder, and the program creates playlist of all *.mp3 under the selected folder (including sub-folders).
No installation is needed, just copy the program to the wanted folder and run it
BananaPC BananaPC allows you to make any PocketPC application run in full-screen mode, terminate a window and mute your device with a single tap
VJTodayButton VJTodayButton - This simple app needs to be assigned to a Hardware Key using the control panel.
Then, when the assigned hardware button is pressed, the PDA will switch from your current application to the Today Screen. When you let go of the assigned key, it will jump back to the application you were previously in
HTC CM Killer HTC CM Killer is a fully automated cab file to completely remove and replace the stock HTC_CM_Guardian.exe with a dummy file. It should work on any HTC device.
HTC_CM_Guardian is a process locked into stock HTC roms (carrier specific???)
this process appears to only monitor certain registry/phone settings, reverting any change back to factory default
nueSIPStylus nueSIPStylus - nueSIPStylus automatically changes the input method / software input panel (SIP) based on whether the stylus is in or out. Note that you must have a device that comes with a stylus sensor (Touch Diamond, Touch Pro, Touch HD, etc...) for this program to work
HomeScreen++ HomeScreen++ - HomeScreen PlusPlus is a freeware today-plugin which shows the remaining load of the main battery for XDA Neo (HTC Prophet - Windows Mobile 5 Phone Edition). This is the function by design. Other devices are reported to work with this plugin as well.
It looks similar to the O2-Battery-Plugin of XDA mini, but without the remaining load of backup-battery
pocketMax Spacer Simple blank plugin to allow spacing other plugins on the Today Screen
Other Software by developer «No2Chem»:
nueSlidingKB nueSlidingKB - nueSlidingKB is a system service that automatically switches between keyboards when you slide your Windows Mobile device open. This is convenient so that the SIP does not take so much space when you open your keyboard. nueSlidingKB also comes with a control panel so you can define sliding sound and keyboard parameters
nueLight nueLight - nueLight turns your device into a versatile flashlight. nueLight uses the flash LED for the camera and can even enter high-beam mode. nueLight also has a morse code function where it will send text you type as morse code over the flash LED
nueMMS nueMMS - nueMMS is a program designed to send MMS over e-mail, which is especially useful if you have MMS blocked or don't have an MMS plan. It can send from your contacts or you can use the handy dialing mode to quickly send an MMS without going through outlook.
Note: Preset messages currently not yet implemented. Not all providers support multiple attachments
nueLED2 nueLED2 - nueLED2 is an open source LED control library. The control libraries are licensed under LGPL v3.0, while the sample applications are licensed under the MIT license. A .NET wrapper is also included.
For Users
nueLED2, unlike nueLED, does not provide a user interface for controlling LEDs (yet!)
nueSIPStylus nueSIPStylus - nueSIPStylus automatically changes the input method / software input panel (SIP) based on whether the stylus is in or out. Note that you must have a device that comes with a stylus sensor (Touch Diamond, Touch Pro, Touch HD, etc...) for this program to work
nueKBLight nueKBLight - nueKBLight automatically turns on the keyboard backlight of your HTC Touch Pro when you switch to landscape mode, so you don't need to guess the first button to press anymore when using your device at night.
Note: The exe file in the archive is intended to be run on your phone/device. Copy the exe to your phone/device and run it from there
nueNullKB nueNullKB - nueNullKB is a new version of nullKB which does not require ATL and supports VGA devices (i.e. the icon is not stretched out anymore).
If you want to change the icon, use a resource hacker – the first icon is a 32x32 icon for VGA devices and the second icon is a 16x16 icon for QVGA devices
nueRecMod nueRecMod - nueRecMod is an updated version of RecMod. nueRecMod recovers files from modules in the format Imgfstools outputs them in (S000, etc). It is based on RecMod by mamaich. However, this version is lighter and properly sets the imagebase, which is especially important when disassembling via IDA
nueSIPDefault nueSIPDefault - nueSIPDefault automatically selects the default input method at startup. It is very lightweight and implemented as a service dll which unloads itself after it is done processing. It also has a configurable wait time to adjust for new versions of Windows Mobile that adjust the default SIP sometime during boot
