With WRC Windows Remote Control can you Copy and Start the integrated or any other Service of your choice, from Remote over IP Networks (Internet), on a Win32 Maschine from your PPC. No physical (Disc) contact is needed. Tested over Layer 3 Switched 100 Mbit, 10 Mbit and slow 64 Kbit WAN Routed Networks.
You can Manage wih the integrated Remote Service, the Remote Maschine''s Process List (like Task Manager), the Registry and the File System, no NETWORK Folder is needed .
To install a Service, Browse a Network for Win32 Maschines select then one (double click them) or more targets and press connect, or type one target IP Adress in and press connect, also you can select "from File", if you have your Hosts in a ASCII txt File (one IP Adress per Line) then press connect.
After this you get the Login Page, here can you change the username, default is Administrator, you can type in your password, or if you have to Manage a large number of Hosts with different passwords, you can press the "PW File" Button and select your password File, must be ASCII txt File with clear text passwords one per Line.
Then you can change the Listen Port from the integrated Service that will be copied and started on the Remote Host, also you can define the Start Type from any Service and you can select a Custumer Remote Service. Note this must be a Win32 Programm writen as Service (like a U*X Deamon).
At the Login Page have also a "Login only" CheckBox, if you check this, WRC only login on the Remote Host, but not copy or start any Service. This allows you only to Manage the File System from the Remote Host.
Press the "OK" Button starts the Process, this mean the copy and start works like a Batch Job, if you selected more Hosts with password from File, WRC comes back and the End with a Status Message, for more details what WRC does, you can look in the Logfile.
In the Manage Pages can you select then the Remote Hosts, where WRC successfully installs the Remote Service.
Requirements: Pocket PC 2002 with Intel StrongArm Processor and Network Interface Card.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0
Similar Software:
rCE RCE - Remote operation of the WindowsCE connected by ActiveSync is carried out
.NET VNC Viewer .NET VNC Viewer is a VNC viewer written entirely in C#. It is binary compatible with Smartphones, Pocket PCs and Windows desktops (with .NET Compact Framework or .NET Framework). I write this mainly because other VNC viewers on Pocket PC do not do full screen and screen rotation. Features:
- Of course, basic VNC viewer functionalities.
- Full screen mode
Home Control Home Control is a networked remote control for multimedia programs. The program consists of two parts: server and client. The client program is installed on Pocket PC, which communicate with the server via WiFi network. The server receives commands from the Pocket PC and control multimedia programs using command line parameters or SendMsg Windows function
WinAmp Remote Control WinAmp Remote Control - WinAmp Remote Control with basic functions. Buttons: Volume Up, Volume Down, Mute, Open, Close Play / Pause, Stop, Next track, Previous track ...
NOTE: This is just a skin you need Total Input Elite application to use it
TouchRC TouchRC is a Windows Mobile application to control VMC/7MC via your phone. It uses the VmcController on the host PC, which needs to be installed.
Brief instructions...
It should be self explanatory on how to add a computer. You can use either an IP address or the computer name
Http Remote Http Remote - With this program your computer can be remote controlled by any browser with access to your computer including your PocketIE on your PDA, or with any other W3C compatible browser.
http://mozo1
WakeAndShake 09/02/2010 WakeAndShake Little utility for waking up / shutting down / rebooting or Logging off from the PCs on your network via you Windows Mobile device.
Installation:
1. Install cab on device
2. Install the service via the msi installer on any PCs you wish to 'control'
3. Edit the WakeAndShakeConfig
Remote Command Remote Command- If you experience problems downloading, please download the file without using your download manager and check your firewall settings. Firewalls and download managers usually block HTTP referrers, which are required by some download mirrors
PTvnc2 for ARM/XSCALE PTvnc2 for ARM/XSCALE - NEW Remote PC viewer PTvnc 2
From the developers of Tower Of Souls PTvncS and PTvncGPRS comes a unique utility for your Pocket PC
PT_VNC 2 will allow you to control your PC from your Pocket PC via your wireless network.
Features include:-
Full control of your PC............From the comfort of you Pocket PC
File transfer to/from the server
Other Software by developer «Heinrich Voggenreiter»:
NToolc Network Tools 2.2 NToolc Network Tools 2.2 - Make your PPC with NToolc to a Powerfull Tool for Network Trouble Shooting and Scanning.
NToolc Provide ICMP Scans, Port Scans, Ping, NSLookup, Trace Route, MIB Browser, Protokol Statistics, Telnet Client, FTP Client, TFTP Server
WNC_IP Windows Network Connect WNC_IP Windows Network Connect - With WNC_IP can You Browse on your Windows IP Network for all Shared Disc and File Resources and connect them to your PPC.
At first Time You Start, WNC_IP creates a Folder named Network in the Root Filesystem of your Pocket PC. After this You must warm reset your PPC
NetDump Realtime Network Sniffer NetDump Realtime Network Sniffer is a realtime Network Sniffer that works with LAN / WLAN / IrDA and most other Interfaces.
NetDump can export the dumped Packets with timestamp in "Ethereal" Format for future use.
Detail Packet exploration is possible while the Sniffer Process is running,
also Packet Filters can be set without stopping the Sniffer Process
