DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
Fast Torch Flashlight LED Quickly turn your device’s LED flash on and off with the touch of a button
Free disco effect lights Turn Your phone or tablet into disco effect light, police lights or stroboscope. Use it as a solitaire or become a DJ and control all devices on party
LineLock LineLock - Get the ultimate locking app to lock your Line App ! Line Lock will lock your Line App to secure your private conversations & calls from unauthorized access
FlashDroid FlashDroid is an open source Flashlight application.
This tool take advantage of your phone's bright screen to help you find your stuff in the dark.
This flash light application is a demonstration of how to make your Android application run in full screen
LED Strobe LED Strobe - This app turns your Android device into a strobe light or stroboscopic lamp, commonly called a strobe. It produces regular flashes of light using the camera flash LED. The speed of flashes can be adjusted.
What's New in This Release:
· Bug fixes.
· Ad network changed
Flashlight Flashlight - An application that turns your phone into a flashlight. This application can also send Morse code according to international Morse code standards. Morse code can be either SOS or a custom message
Bagf Light With this application you can use the flashlight of your device as torch! Enjoy!
Rainbow Lamp Rainbow Lamp - Rainbow Lamp turn your phone into a color flashlight. Small application size but it has various
Flash Light Torch Flash Light Torch - The brightest fastest and most handy flash light torch
Flash light torch is probably essential tool and free Smartphone application that surely everyone knows its use!
If your Smartphone has flash then maybe you do not need to bring a flashlight with you in the dark. This simple, handy, free application would help you even a flashlight
Multitouch Test Multitouch Test - This app shows how your phone''s hardware handles multitouch. Multitouch Test allows you to find out the multi touch capabilities of your device. It supports up to 20 pointers (fingers). Each touch pointer is visualized with a colored circle (blue: down, green: move, grey: up)
Other Software by developer «leppie»:
not found
Comments on DHD Proximity Sensor Recalibrator:
papa beat:
I hope it wprks
Date: 9 Oct 12
HKG:
This app doesnt work with Sony Ericsson Arc S. Error: "Kernel not supported" -ps_kadc not found.
Date: 9 Nov 12
anil:
sensor
Date: 10 Dec 12
Jawad:
his app doesn't work with sky vega a830L Error: "Kernel not supported" -ps_kadc not found.
Date: 30 Apr 13
jpmurf:
Doesn't work on LG G2 D800 "Kernel not supported" -ps_kadc not found.
Date: 5 Aug 14
deepak:
in lava xolo a600 "Kernel not supported" -ps_kadc not found. same issue
Date: 7 Dec 16
If you noted an error or download link is broken, please, report it via this page or use comments.
DHD Proximity Sensor Recalibrator is compatible with your device Casper V6 LTE
