Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
Mobile ScreenTester Mobile ScreenTester is excellent for testing your PDA''s display to quickly find dead pixels. It is simple to use and it is also a very thin application and it is FREE!
Keylight Activate / Deactivate the keyboard LEDs on Treo 700w/750v, HTC TyTn, MDA Pro, MDA III and others
SosFlasher SosFlasher - SosFlasher can turn your Pocket PC into an SOS flashlight.
SosFlasher requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer. For free support on installing, email the author
DevState DevState - This is today plug-in for Pocket PC 2003 and Windows Mobile 5.0. This enables to add mainly 3 functions on your today screen like below:
- Displays Memory/Storage status.
- Displays Battery/Power status and it has following function.
>> Soft reset.
>> Turn off your device
RotateSE270 .NET RotateSE270 .NET - This little program rotates the screen on Windows Mobile 2003 SE devices in 270 degrees. Its perfect to be used in Today Screen Launchers.
THIS TOOL IS FOR WINDOWS MOBILE 2003 SECOND EDITION, PLEASE READ THE REQUIREMENTS BEFORE YOU WRITE A REVIEW SAYING THAT THIS DOES NOT WORK IN ANY OTHER OPERATING SYSTEM
LEDFlashlight LEDFlashlight - turns your PocketPC into a LED flashlight. Simply tap the button to power on the camera LED light and tap again to power it off. It works on Samsung Omnia Lite, Omnia Pro, Armani, Omnia II, SCH i920, Omnia II, TOmnia II, Jack, Intrepid and Oz Omnia
O2Flash O2Flash - Flashlight application for Windows Mobile. O2Flash is integrated into the O2Compass installer, but if you need it alone...
What's New in This Release:
· The application does not let the phone to sleep, so the flash doesn't turn off when the screens turn off
TCD (Taskbar Clock and Date) TCD (Taskbar Clock and Date) - With this little program you can change the look of your date and time shown in the Windows Mobile taskbar.
What's New in This Release:
· Added CheckBox for choosing a date separator ( "/" "-" "
HHZSoft OffScreen HHZSoft Offscreen provide the easist and convenient way to turn off screen and backlight. Also supports tray run mode and timer function, system reset & shutdown mode.
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device CipherLab CPT-9480 / CPT-9490
