BrightnessDAs - with a stroke of your finger (depends on the DA launcher you're using and the options you choose to invoke my DAs) your could quickly choose between minimum brightness (great for reading at night), low (~20%, for battery-conscious users ;), medium (50%, should be enough for most situations) or maximum (100%. The range above 50% up to 100% is superfluous).
Installation
- BrightnessMinDA.prc - Sets brightness to 0% (retaining backlight)
- BrightnessLowDA.prc - Sets brightness to approximately 20%
- BrightnessMedDA.prc - Sets brightness to 50%
- BrightnessMinDA.prc - Sets brightness to 100%
Like it? Share with your friends!
Supported operating systems:
Palm OS 4.x, Palm OS 5.x
Similar Software:
Service LED for Treo 680 This freeware utility enables your Treo 680's LED light flashes green when your phone is connected to the mobile network
Lamp Lamp only displays a never-ending white screen which has no value expect that it can be used as a backup lamp. At the bottom of the screen, the battery percentage level is displayed.
No parameters, no special features - excepts that UP and DOWN buttons can be used to increase/decrease brightness. Tap on the screen to exit the application
AutoBacklight AutoBacklight is a small application that allows to adjust backlight intensity according to the current time. It helps to improve display readability and optimize power consumption. It means that your PDA will run longer without recharging
Torch-by-stone-age Torch-by-stone-age - Torch is the worlds smallest useful Palm app at 494 bytes! makes your screen as bright as possible through judicious choice of screen colouring (black)
Screen Prefs Screen Prefs sets the default screen color/gray scale depth and color scheme for your Palm OS device. It can handle screen modes from black and white (1-bit) all the way up to 16-bit color.
This program shows up in your Palm Preferences application (known as Prefs) and not in the application launcher. However, it can be configured to show up in the application launcher
BrightTools BrightTools - BrightTools is a program that controls the brightness of the screen. To achieve this it has three different tools that controls the LCD brightness value: scheduled brightness change, popup dialog box and external power connection.
The Scheduled brightness tool changes the brightness of the screen according to a profile of hourly brightness values
GreenLightHack GreenLightHack is a HackMaster hack that reverses the polarity of the screen when the backlight is turned on (all white pixels become black and all black pixels become white).
This has the effect of making the backlight on the old Palm models (Palm III and below) look like the new ones, and the backlight on the new ones (Palm IIIx and above) look like the old ones
Landscape Landscape - Mobile Stream utility Landscape allows to use very popular Sony CLIE NX/NZ/TH series models in landscape mode. The utility implements standard PalmSource Pen Input Manager API 1.1. Practically this means that any application that works in landscape mode on Tungsten T|3, Tungsten T|5 or Zodiac handhelds will work in landscape mode on Sony CLIE handhelds
Backlight Combo Backlight Combo is designed to be the ultimate solution for effective use of the backlight on the recent Palm models (Palm Vx and the m50x series).
Backlight Combo consists of two separate programs that work together: Backlight Panel (BLT-Panel.prc) and Backlight Hack (BLT-hack.prc)
Torchlight Torchlight - Turn your palm into an emergency torchlight or hand-mirror.
During a recent storm late one night recently our house lost all electrical power.
Fortunately, I had my trusty palm on me and was able to find way around a completely dark house
Other Software by developer «Yuval Melamed»:
FindPrivate FindPrivate - If you're using the 'Find' on your PalmOS device, and if you also hide/mask private records, you may miss some search results that you'd like to see.
Not always you may remember to show private records prior to 'Find', and even if you do - it's a little bit cumbersome when you need your data fast
HoldSync HoldSync allows you to HotSync by holding one of your hardware buttons.
Enabled by default, it can't get any easier than that:
Hold first hardware button for 8/10 of a second and release to HotSync.
(You'll hear a confirmation sound after holding the button long enough) Disable by clearing the "Hold..
SafeRecs SafeRecs can either mask or hide your private records:
At power-off: If shown, private records will be made safe, and 'Security' will be launched (see Q&A).
Before 'normal' launching of applications under OS5+
When tapping the 'Find' silk-screen button (asks for password to continue, OS5+)
PowerBright PowerBright allows you to toggle your brightness from maximum to minimum by holding the 'Power' button for a configured time.
You may also hold the Page-Down/Up buttons too, to adjust the brightness down/up respectively - the step value and treshold are configurable for your convenience
pTunesDA pTunesDA - displays the console window of Pocket Tunes if it's running in background & launches app if not.
(pTunes already has its own user-friendly means to show this console window, but users wanted DA...;)
pTunes/Pocket-Tunes is copyright of NormSoft, Inc
LensWarning LensWarning - Tested under TH55 only - may work for others too.
LensWarning will remind you to cover the lens of your CLIE(R) device before running non-camera apps, or at power-off/on (configurable).
The warning is by LED and optionally a sound, and won't interfere with other programs or power off
BacklightDAs BacklightDAs - instead of draining your battery because you THOUGHT you've turned off the backlight under that strong sunlight (and honestly, who can tell?) - download these DAs today!
You'll need a DA launcher to see and run these DAs once installed
AutoOffExtender AutoOffExtender - AutoOff is when your device shuts itself off automatically after a specified period of user-inactivity, in order to conserve battery power.
AutoOffExtender can detect when your device is powered on after being off for less than a few seconds, and extend the auto-off time for that session, assuming you need more time to watch the screen with no action
