HardReset will hard reset any device, with a 10-second warning. If your power button has stopped working, this will help you do a hard reset.
Like it? Share with your friends!
Supported operating systems:
Palm OS 5.x
Similar Software:
Clean T3 Original DIA Clean T3 Original DIA - I've always been bothered by the status bar's odd, broken black background and the incorrect sizes of some of the active buttons.
This is my simple touched up version of the T3 original to make it a little cleaner.
Standard skin and T3AgendaBG skin versions included in the zip file.
NOTE: This only works on a Tungsten T3
Disable Buttons Disable Buttons - Did you ever lose some data because your palm turned on for an accidental key press?
This seems to be a frequent problem, especially for users keeping their palm in a pocket of their trousers.
This tiny application allows you to disable the hard buttons (except, of course, the power button) when the palm is off
Palm Auto Installer Palm Auto Installer is an Command line Interface to the delivered Palm Hotsync Install Application
USB Sync Fixer USB Sync Fixer - Some Palm M500's and M505's have sporadically quit Hotsyncing. One way to solve this issue is to drain the battery on the Palm until it is absolutely dead. Then charge the Palm back up and it will Hotsync again.
While this does not work on every Palm, we've found it works on about 8 or 9 out of every 10 Palms
Pocket Shortcuts Pocket Shortcuts - With Pocket Shortcuts you can free up to 95% of your device's memory by moving applications to an SD or MMC card and creating a shortcut on your device's memory.
You can create a shortcut to any application in your device's memory
Memory Scanner Memory Scanner - Now using ARM code - runs up to 20x faster on Palm OS 5 devices!
RNS:: Memory Scanner - find anything anywhere in the memory of your Palm!
Memory Scanner will scan the whole memory built into your device (RAM and ROM)
keepoff keepoff - will disable the keyboard on a Treo (600) until the power button is pressed, or a screen tap, even when the device wakes up for email or alerts.
KEEPOFF locks out all keys when the Treo is turned off (with the power button) UNTIL IT IS TURNED ON AGAIN using the power button. YOU MUST DISABLE KEYGUARD for this to work properly
IrOff IrOff - "Beam receive" is a feature that allows a Palm handheld to continuously scan its IR receiver for incoming transfers.
It is useful in some situations, but it draws a fair amount of power from the battery and reduces autonomy.
You can turn this feature off from the Prefs/General panel; but on Palm OS 4
CFX CFX allows you to store/retrieve files directly to/from TRGpro's CF card using the XMODEM protocol in your standard terminal program
ID-plate ID-plate is a system info viewer for Palm Powered handhelds with specific support for Sony Clié. It displays the OS version, processor type, memory info, IDs for model-identification. In addition, it displays Sony Clié info such as model and codename.
Reports may be beamed or sent via Bluetooth or SMS
Other Software by developer «PalmPowerups»:
PowerSDHC PowerSDHC - As you may be aware, most Palm devices that do not carry a "Treo" or "Centro" brand cannot read or write to the new SDHC cards. This leaves everyone owning such devices behind in terms of storage and costs. SD cards top out at 2GB, while SDHC cards are available at 32GB sizes already, and 16GB cards can be obtained for less than $80 USD
FastDIA FastDIA removes the DIA animation on Palm 320x480 devices
Flash Installer Installs the Flash Player normally found on Sony devices
GrandCentral Dialer A dialer application to dial any number through the GrandCentral service
BluePill BluePill is the simplest and the most secure way to protect your PalmPowered Treo device and the data it contains.
It is significantly more advanced than other applications made for this purpose as well as being much easier to use and having a muchfaster response. You may define up to 16 trigger SMS messages that performdifferent things when you send them to your phone
vDub vDub makes the device play the same sounds the microphone hears. The practical upshot of this is that if you connect a cable to headphone jack of the device and the other end to a microphone receptacle of another device, you can use the Palm as an amplified microphone
DynaClock DynaClock adjusts CPU speed based on demand of the current application.
CPU speed is adjusted once every second. You may configure applications to be run at a certain minimum speed or set a maximum speed. This application produces noticeable gains in battery life. Try it with a free 14-day trial
Treo Ringtone Installer Will install MP3 ringtones from card to Treo 680 without loss of quality. Source code included
warpSpeed warpSpeed is an overclocking/underclocking utility for PalmOS devices. It also, for some devices, has the ability to kill the infamous screen whine. This program is unique because it does not limit the user at all, so you are free to experiment with no limits. Every single possible speed on your hardware is acessible to you
Mandelbrot Mandelbrot will show and allow you to explore the Mandelbrot set of any power. Can be used to be a banchmark
