Backlight On will turn on the backlight of your m505 every time you turn your Palm on.
Backlight On differs from the "official" Palm app in several ways:
-There is never any user interface. It just works, and doesn't need to be configured.
- It is much smaller (under 1Kb).
- It turns on the backlight everytime the m505 is turned on.
There's no icon to clutter up your launcher.
This is not a hack! It uses the Notification Manager introduced in Palm OS 4.0. It is safe to run on any Palm Powered device - but won't do anything unless it is an m505.
You can always turn the backlight off by holding the power button for 2 seconds.
Holding the power button for 2 seconds again turns the backlight back on - just like you expect it to!
If you decide you don't like the app you can just delete it and your Palm will revert to its original operation.
Like it? Share with your friends!
Supported operating systems:
Palm OS 4.x, Palm OS 5.x
Similar Software:
Reflecticus Reflecticus is a Mirror/Flashlight for Palm OS
Lamp Lamp only displays a never-ending white screen which has no value expect that it can be used as a backup lamp. At the bottom of the screen, the battery percentage level is displayed.
No parameters, no special features - excepts that UP and DOWN buttons can be used to increase/decrease brightness. Tap on the screen to exit the application
Profeo LightControl Profeo LightControl is one of the most advanced light management utilities for palmOne Treo 600 smartphones, suitable for people who don't want to install a profile manager on their Treo. It provides you with complete control over the lights of your palmOne Treo 600
BrightCam BrightCam sets the brightness of the Treo600 screen and the keyboard backlight depending on the light levels measured from the camera.
How to configure BrightCam?
The light levels measured by the camera may change depending on the camera type of your Treo600. BrightCam remembers the biggest and the lowest values received by the camera to adjust the brightness properly
StreakHack StreakHack - Does your Palm 'streak'? Some Palm IIIx and Vx machines show 'streaking', shadow lines extending from vertical and horizontal lines on the display. This is especially noticeable in the Calendar view in the DateBook app.
StreakHack can help reduce the streaking. After activating StreakHack in HackMaster, adjust the contrast to your liking
PDAMirror PDAMirror is a very simple app that turns you PDA Screen into a mirror.
What's New in This Release:
· Rewrote the code so that it no longer needs the AppForge Booster.
· Was also able to get it to load faster along with some other minor fixes
MirrorPro MirrorPro is another Mirror application for PalmOS.
It combines several featuresthat are unlikely to be found (at least not together) in other implementations:
It's freeware
Twinkle Twinkle Little Pix! Twinkle Twinkle Little Pix! can help you to check the Dead Pixel at your Color Screen
BacklightDAs BacklightDAs - instead of draining your battery because you THOUGHT you've turned off the backlight under that strong sunlight (and honestly, who can tell?) - download these DAs today!
You'll need a DA launcher to see and run these DAs once installed
Other Software by developer «Whizoo»:
Whizoo Power Power management for Palm OS 4 and OS5 handhelds!
Whizoo Currency Whizoo Currency - This currency converter is designed to perform conversions quickly and easily! Large buttons eliminate the need to use your stylus. The conversion happens as soon as each digit is tapped so you get your conversion instantaneously! Over 65,000 downloads!
· Support for up to 4 currencies of your choosing
· Instantaneous calculations
BtServer BtServer - uses Palm's Bluetooth virtual serial driver to communicate with other Bluetooth devices that support the Serial Port Profile.
It opens the Bluetooth virtual serial driver in server mode. This creates an RFCOMM listening socket and an SDP entry that advertises the Serial Port Profile
BtToggle Classic Bluetooth and Power Management in one small app!
Net Sync Net Sync - FREEWARE - Perform a network HotSync quickly and easily.
This application gives you quick access to all your services and connections, allowing you to quickly select the one you want and HotSync over any network.
This is very convenient if you HotSync over different connections like Bluetooth Access Points, cellphones etc
BtSerial Pro BtSerial Pro - BtSerial Pro allows you to connect to any Bluetooth device that supports the Serial Port profile.
This gives you an easy way to connect to cell phones, sensors and more.
BtSerial Pro is a member of a family of communication programs that includes BtSerial and BtServer
RegCode RegCode is just the thing you need to boost sales of your Palm OS application! RegCode generates a registration code based on a user's HotSync ID which encourages each user to pay for their own copy of your app. The small investment you make in RegCode will quickly be recouped
MapButtons MapButtons - Do you have a Palm OS handheld with a camera or voice recorder that you never use? Do you accidentally bump these buttons while doing other things and get frustrated when a voice memo suddenly starts recording? MapButtons in the answer! This application allows you to change the application that launches when you press these buttons
