USB Sync Fixer - Some Palm M500's and M505's have sporadically quit Hotsyncing. One way to solve this issue is to drain the battery on the Palm until it is absolutely dead. Then charge the Palm back up and it will Hotsync again.
While this does not work on every Palm, we've found it works on about 8 or 9 out of every 10 Palms.
This FREE utility will drain your battery for you, speeding up the process for you. It should drain a full battery in about 3 to 4 hours. This program also has instructions on it as to what you are to do during the procedure.
This should get your USB Hotsync back operational. This is not guaranteed in anyway to get your Hotsync operational again. However, its about a 90% chance that it will work.
If your Palm will not Hotsync then you will need to get someone to download it and install it onto their Palm and beam it to you, or if you can do an Infared Hotsync or Serial Hotsync, then you can get this program on your Palm that way.
This is a handy program to have even if you haven't run into this issue with your Palm yet. If this still doesn't get your Palm Hotsyncing then we suggest you call Palm Technical Support for further assistance.
Like it? Share with your friends!
Supported operating systems:
Palm OS 4.x, Palm OS 5.x
COMutator COMutator is a system tray application that allows you to easily switch the Palm HotSync Manager between different COM ports, even allowing you to use multiple COM ports at the same time
Memory Scanner Memory Scanner - Now using ARM code - runs up to 20x faster on Palm OS 5 devices!
RNS:: Memory Scanner - find anything anywhere in the memory of your Palm!
Memory Scanner will scan the whole memory built into your device (RAM and ROM)
Digifix Digifix - will automatically save and restore your digitizer calibration.
Will solve Mad Digitizer Syndrome - (when digitizer slides out of alignment).
Everyone needs this free little utility.
This program does everything and more than AutoDigi but is Freeware
SharkROM SharkROM is the new utiltity by Sharkboy717 allowing you to totally revolutionize your launcher's look by hiding ROM programs that you don't use
Tool One Color Tool One Color - show information of your PALM based handheld.
It will show you information of memory cards, user, battery, RAM and ROM, free RAM, PALM ID etc.
Tool One show most needed system information of PALM based PDA's.
Tool One is available 1/2/4/8 Bit color version and SONY Hires Version with 320x320 pixel support.(see REQUIREMENTS)
Since Version 1
KeepOn KeepOn - Keeps your Palm OS enabled device switch on until you press the Power button With KeepOn enabled any sysNotifySleepRequestEvent is catched so that the device will not go to sleep. Only is the sleep request is released by the sysSleepPowerButton the device will switch off. Attention! May be the battery of your device gets drained und you may loose your data
KeySwitch KeySwitch is a basic key remapping utility which remaps keys on an app by app basis. Simply choose the program who's keys you would like to remap then add any number of key swaps. The best example of what to use KeySwitch for is the Capture application (Camera or Camcorder)
DynaClock DynaClock adjusts CPU speed based on demand of the current application.
CPU speed is adjusted once every second. You may configure applications to be run at a certain minimum speed or set a maximum speed. This application produces noticeable gains in battery life. Try it with a free 14-day trial
UtiALL UtiALL let you check the time, battery, memory and Card free space within any application, simple as select the icon in the menu command bar.
What's New in This Release:
· HiRes Digits for the clock.NEW.
· HiRes Launcher Icon.NEW.
· Auto reactivate on soft reset.NEW
Other Software by developer «Langman Technologies»:
not found
Comments on USB Sync Fixer:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
USB Sync Fixer is compatible with your device Clie NX Series