EVDash is a Palm OS application that acts as a set of dash board gauges for electric vehicles. It displays battery pack voltage, amps being drawn from the battery pack, and two different estimates of remaining battery capacity. It works with Xantrex's Link 10, formerly called the E-Meter. Just plug the Palm device into the E-Meter, preferably through an optical isolator to protect the Palm device and start the EVDash program.
- Voltage - Battery pack voltage.
- Amps - Amps being drawn from or put back into the battery pack.
- Capacity based on voltage - Capacity calculated from the pack voltage under very low load. Voltage drops off as pack capacity drops.
- Capacity based on amps - Capacity calculated from the amps drawn integrated over time compared to the pack capacity. The peukert effect is taken into account.
Once you install the EVDash.prc on the Palm pull down the menu and go to the setup window. Enter the pack capacity and the Peukerts constant. The state of charge voltages should be determined experimentally by recording the voltages as the battery pack is completely discharged.
To transfer ASCII data from your Palm, use the standard Hot sync cable and a terminal program. Set the following communications information:
Clie AudioPlayer Stylus Volume and Position Hack This application addresses one of the greatest inconveniences of the Clie AudioPlayer application, which is the inability to set the playback position and volume by tapping on the appropriate bar on screen
AlwaysOnHack AlwaysOnHack - You can now focus on your activities without any interruption from the "autosleep" feature.
Useful when used with programs that require a password to start, even after an unexpected "autosleep" mode.
Hope it is useful
PalmBuzzer PalmBuzzer allows you to set sound to the 4 hardware buttons, to letters and numbers and to add a picture on top of the window.
These are the naming rules at the moment:
Every file needs to be a WAVE audio file and stored in /PALM/Programs/PalmBuzzer/
* for the 16 on-screen buttons: Test1.wav to Test16.wav
* for the 4 hardware buttons: Hard1.wav to Hard4
mobileWATCH mobileWATCH is a watch face application, generally used on the Fossil WristPDA watch, but usable on any device with PalmOS 4 or greater. mobileWATCH solves some of the typical functional problems of the WristPDA. For instance, it allows louder alarm sounds, better control of alarm sound duration, and prevents 'phantom' alarm
Send2Palm Send2Palm is a simple utility that allows you to easily install applications and databases in Palm OS powered devices, through the command-line in an automatic and customized way.
Send2Palm uses the default HotSync API to send files to the HotSync queue, which is the list of applications that shall be installed on the next sync
Skeleton Key Skeleton Key is a program that automatically calculates the possible combinations of a MasterLock combination lock.
The number of combinations is decreased from 64,000 to 100 which can then be checked in under 10 minutes!
In order for this system to work however you must be able to find the third number
List Hack List Hack is a small system extension that will scroll through a standard list when the up/down buttons are pressed. I created this hack, because I found I was pressing the scroll buttons and expecting a list to scroll, and because it didn't I had to tap the to small buttons in the list itself
TreoSelCntlHack TreoSelCntlHack - provides button and category selection on a Handspring Treo.
The functions are invoked by pressing one or two keys simultaneously. ButtonOpt+Space Next ButtonOpt+Space CategoryOpt+Menu Category UpRocker Up Category DownRocker Down SelectReturn SelectSpace .
Additionally for some Categories, pressing the first letter of the list item selects the list
TickHack TickHack - Tick tick tick! TickHack adds audible feedback to your Graffiti input -- handy when you're looking away from your Palm while you write.
TickHack was developed entirely on-board a Palm Vx using the Quartus Forth compiler
Other Software by developer «Peter Ohler»:
EV1Dash EV1Dash is a program for Palm OS devices that will collect data from the EV1 and display it on the Palm OS device display. The intent is to provide more information to the driver so that range and performance can be optimized. Here is one of the displays. There are two other displays
