IrOff - "Beam receive" is a feature that allows a Palm handheld to continuously scan its IR receiver for incoming transfers.
It is useful in some situations, but it draws a fair amount of power from the battery and reduces autonomy.
You can turn this feature off from the Prefs/General panel; but on Palm OS 4.x machines, the "Beam receive" preference is often unexpectedly reset to "On", even when the user has explicitly set it to "Off".
This utility allows you to keep the "Beam receive" preference always off, and thereby increase the autonomy of your handheld.
IrOff requires PalmOS 4.0 or higher (it has no purpose on previous versions).
Once the PRC file is hotsynced to your handheld, launch the "IrOff" application, and check the "Keep beam receive off" box.
The counters at the top of the screen display the number of times that IrOff checked for Beam receive preference, and the number of times it actually changed it from "On" to "Off".
IrOff is automatically reactivated after a soft reset.
IrOff has been reported to crash the Clie PEG-T675C at reset (under investigation).
IrOff is freeware. You are allowed to distribute it as long as you don't charge for it or alter it in any way.
IrOff is offered in the hope that it will be useful, but the author can not be held responsible for any damage that would occur from its use or the impossibility to use it.
Like it? Share with your friends!
Supported operating systems:
Palm OS 4.x, Palm OS 5.x
Similar Software:
PowerOff for Palm OS PowerOff for Palm OS - Power off with a tap or any hard button. You are no longer restricted to using the power button anymore.
Features:
One tap off - Power off your Palm by tapping on the PowerOff icon.
Use any button to power off - You can also assign PowerOff to another hard button in your Prefs application
Afterburner Afterburner - Do you have a need for speed? Tired of waiting for your Palm? This utility allows you to run your Palm up to 353% (for Prism - different Palms have different limits) the normal speed.
Going on a trip, want to conserve power and extend battery life - Yes! Afterburner can do that too by underclocking the CPU.
The successor to Afterburner 2
CryptoPad-HE CryptoPad-HE - This version of CryptoPad has been adapted to use some of the HandEra 330's features, including the fonts, graffiti area minimization, and the jog wheel
Softick Cache Softick Cache is an adaptive "disk" cache for flash cards used in Palm OS PDA and smartphones. It speeds upcard access by using faster dynamic memory instead of slower SD/MMC card and SD host controller.
Why Softick Cache?
All desktop operating systems has built-in cache for disk operations
DateBk5 DateBk5 is the successor to the very popular DateBk4 and DateBk3 calendar/time management programs. A light version of DateBk3 was licensed to Handspring as their Advanced Datebook application (Datebook+) underscoring the popularity of this very powerful application
XMSwitchSet XMSwitchSe - X-Master system extension that allows you to activate X-Master sets from any application.
If you have certain system extensions that are mutually exclusive or that you want to use only in certain situations, you can define sets in X-Master and switch between these sets
Pive - Palm Internals ViEwer Pive - Palm Internals ViEwer - Pive presents Palm data hierarchically: the list of creators, features or data bases for selected creator, resources/records for selected data base, and finally a dump of selected resource or record in mixed (hex+char) format.
It also shows data base properties and blocks.
Preliminary knowledge of PalmOS is expected
OntheInside OntheInside - Color devices only... Have a look at the guts of your Palm device.
OntheInside will tell you the time, in 12 or 24 hour format, the date, as formatted by your device, and some system info.
To view info, use your stylus to probe spots on the printed circuit board.
Try holding your stylus on some of the components
Memory Scanner Memory Scanner - Now using ARM code - runs up to 20x faster on Palm OS 5 devices!
RNS:: Memory Scanner - find anything anywhere in the memory of your Palm!
Memory Scanner will scan the whole memory built into your device (RAM and ROM)
Profeo SystemAlarms Profeo SystemAlarms - allows you to set up to 5 alarms based on the remaining capacity of the battery, memory and expansion card, with different trigger level (2-50%). You can set multiple alarms for the same parameter (battery, etc.), each with different level and alarm notification options. The program will silently check for alarm triggers every 30 minutes
Other Software by developer «Olivier Gerardin»:
not found
Comments on IrOff:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
