No Streak Hack - Some Palm IIIx displays have the 'streaking' problem. They tend to extend vertical lines (can be seen in the datebook month view) . Sometimes this can be adjusted by reducing the contrast using the contrast adjustment wheel.
This problem can sometimes be solved with software by changing the display refresh frequency. The PalmOS 3.1.1 upgrade and other programs cure this.
Flickering greyscale on the Palm IIIx and Handspring Visors
In order to prevent streaking, the PalmOS 3.1.1 upgrade and all later OS versions for the Palm IIIx and some old models of the Handspring Visor (not the prism or the platinum) reduce the screen refresh rate like this hack does.
Reducing the refresh rate has one major disadvantage: Greyscale pixels are generated by turning the pixels on and off very fast by the video controller. Together with the reduced screen refresh rate of the Palm IIIx and some Visors, this causes visible flicker in greyscale video modes used by some games and e.g. programs like AvantGo.
It is possible to setup nostreak to disable the anti-streaking code in these OS versions. In order to prevent flickering greyscale modes in e.g. programs like PalmBoy on the Palm IIIx and the Handspring Visor, install nostreak, start the hackmaster application, go to the nostreak setup (the small '+') and set the refresh rate to '0' and select 'enable in greyscale mode'. After that you might need to re-adjust the contrast setting, but the flickering in greyscale applications will be gone.
This disables the anti-streaking features of PalmOS and you might see streaking on your Palm IIIx or Visor after this. There is no way to reduce streaking and to avoid flickering greyscale at the same time.
What's New in This Release:
· Version 1.3 can be activated for greyscale modes separately
Like it? Share with your friends!
Requirements:HackMaster
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
ReDigi ReDigi - ReDigi helps you to access the digitizer screen when your pen is severely misaligned.
Calibrate after a soft reset - Normally, after a soft reset, the Prefs screen will appear. With ReDigi, the calibration screen will show after a soft reset. This allows you to calibrate the digitizer
ScnCalibrate Program for recalibrate the digitizer with one click
TinyMirror TinyMirror - Unlike other mirrors, TinyMirror uses the whole screen (there is no annoying menu bar to ruin your reflection).
TinyMirror can also display an all black or an all white screen.
You can toggle between the two by pressing the scroll buttons.
TinyMirror can also conveniently transform into a flashlight if the backlight is turned on
Mirror+ Mirror+ turns the whole screen black, unlike other programs, and takes up just 2kb of space.
Run the program and your Palm or Visor will become an effective mirror, great for checking your teeth or fixing your hair before that big date
MALZ Mirror MALZ Mirror is a freeware application that turns all pixels in screen to black so the pda's screen turns into a mirror
PDAMirror PDAMirror is a very simple app that turns you PDA Screen into a mirror.
What's New in This Release:
· Rewrote the code so that it no longer needs the AppForge Booster.
· Was also able to get it to load faster along with some other minor fixes
Backlight On Backlight On will turn on the backlight of your m505 every time you turn your Palm on.
Backlight On differs from the "official" Palm app in several ways:
-There is never any user interface. It just works, and doesn't need to be configured.
- It is much smaller (under 1Kb).
- It turns on the backlight everytime the m505 is turned on
GreenLightHack GreenLightHack is a HackMaster hack that reverses the polarity of the screen when the backlight is turned on (all white pixels become black and all black pixels become white).
This has the effect of making the backlight on the old Palm models (Palm III and below) look like the new ones, and the backlight on the new ones (Palm IIIx and above) look like the old ones
Lamp Lamp only displays a never-ending white screen which has no value expect that it can be used as a backup lamp. At the bottom of the screen, the battery percentage level is displayed.
No parameters, no special features - excepts that UP and DOWN buttons can be used to increase/decrease brightness. Tap on the screen to exit the application
Backlight Combo Backlight Combo is designed to be the ultimate solution for effective use of the backlight on the recent Palm models (Palm Vx and the m50x series).
Backlight Combo consists of two separate programs that work together: Backlight Panel (BLT-Panel.prc) and Backlight Hack (BLT-hack.prc)
Other Software by developer «Till Harbaum»:
IR Pong IR Pong - IR Pong is a two player action game for the Palm Pilot. You'll need a palm with infrared or bluetooth capabilities and a second person with a similar machine to play this game.
You can choose between nine different board layouts and adjust the level of difficulty as you get better
Battery Meter Hack Battery Meter Hack - This program replaces the battery symbol in the PalmOS launcher application with a customizable symbol and an additional value. This value can be configured to display the absolute battery voltage or the battery level in percent
IR Ping IR Ping - This program allows to check the communication between a Palm III or a PalmPilot Professional with IrDA extension and other IrDA devices or another PalmPilot. The current version tries to access a IrCOMM port. This is present in most printers and Palm devices with PalmOS >= 3.3
PBrick PBrick - The PBrick library provides a API for bidirectional IR communication between the palm computing platform and the lego mindstorms RCX controller
BlueBlocks BlueBlocks - BlueBlocks is the first real multiplayer Bluetooth game for PalmOS. It uses a so-called piconet to connect up to four palm PDAs into a bluetooth network. These four palms can then join each other in a multiplayer session of BlueBlocks.
The game has been developed and tested with a PalmOne M515 and a PalmOne Tungsten T
Argon V Argon V - Your objective is to survive as long as possible and to shoot down everything that moves. Avoid to crash into buildings, energy barriers, bombs and other ships, since this will damage you shield. Try to collect upgrades to increase the ship strength or to reduce damage
The Grayscale Hack The Grayscale Hack - This is a utility for the Bodos PalmBoy and Phoinix Gameboy emulators. It may be useful for other applications as well.
This is a Hackmaster hack and requires the hackmaster application or a compatible replacement to be installed in order to work.
This hack allows the systems grayscale settings to be modified
Mulg Mulg - Guide the marble through the maze and to the cross. Along the way you'll encounter stones blocking your passage, flipper bumpers, slippery ice, and several other obstacles. Be sure to visit Till's web site for hundreds of additional levels
Mobile25 Mobile25 is a mapping application. It was meant to be used on our geocaching trips. The maps are stored as compressed bitmaps on memory card and e.g. the 1:100.000 (TOP100) and 1:25.000 (TOP25) maps of Baden-Wurttemberg, Germany together require about 700MB of memory card space.
Mobile25 supports bluetooth GPS devices and can display the current GPS position on the map
