SerialFix is an OS/5 system extension that corrects a variety of problems with serial support in Tungsten/T and Tungsten/T3 devices.
Version 2 allows the Tungsten/T3 to communicate with devices that do not support hardware flow control, such as GPS units.
Non-standard baud rates are provided on the Tungsten/T. Devices such as MIDI controllers or automotive computer interfaces that require special baud rates can operate normally with SerialFix installed.
If a program fails on the Tungsten/T or Tungsten/T3, but works on other Palm devices, SerialFix may allow that program to operate normally on these devices.
SerialFix enables other programs to operate. It is not something that you need pay attention to once it is installed. The Active status checkbox specifies whether or not it is active. The AutoActivate checkbox specifies whether or not it is automatically made Active after a Soft Reset. These checkboxes are normally both enabled.
What's New in This Release:
· Version 2.3 adds support for overriding the connection type to Serial or USB, bypassing of the normal detection logic. This can be used with "Y" cables to select the serial connection. It can also be used to improve reliability with connections that are intermittent or incorrectly identified.
Like it? Share with your friends!
Supported operating systems:
Palm OS 5.x
Similar Software:
Pive - Palm Internals ViEwer Pive - Palm Internals ViEwer - Pive presents Palm data hierarchically: the list of creators, features or data bases for selected creator, resources/records for selected data base, and finally a dump of selected resource or record in mixed (hex+char) format.
It also shows data base properties and blocks.
Preliminary knowledge of PalmOS is expected
Clean T3 Original DIA Clean T3 Original DIA - I've always been bothered by the status bar's odd, broken black background and the incorrect sizes of some of the active buttons.
This is my simple touched up version of the T3 original to make it a little cleaner.
Standard skin and T3AgendaBG skin versions included in the zip file.
NOTE: This only works on a Tungsten T3
IrOff IrOff - "Beam receive" is a feature that allows a Palm handheld to continuously scan its IR receiver for incoming transfers.
It is useful in some situations, but it draws a fair amount of power from the battery and reduces autonomy.
You can turn this feature off from the Prefs/General panel; but on Palm OS 4
Daikin VRVII error codes Daikin VRVII error codes - Simple Smartlist of DAIKIN VRV M-series (also known as VRVII) error codes.
List contains brief description with supposed causes of trouble.
Useful for all people working with DAIKIN VRV as a quick reference
Apt Apt is a unique palm application. It is something of a mix between a preferences application, a button launcher and a macro program. The most distinguishing feature from other applications is that almost everything it does is on a per-application basis
UnCzech Address UnCzech Address - UnCzech Address is a simple PalmOS application used to replace Czech accent characters (code page 1250) at addresses by their unaccented counterparts. This is usable for synchronizing addresses with GSM phone or printing addresses on printer
PerfectDay New PerfectDay New is the only program that will display pictures when your Palm goes to sleep, wakes, external card inserted or removed.
· Four states. Sleep, Wake, card insert and removal
PMaster PMaster - Uses the internal construction of Master locks to narrow the number of possible combination that have to be checked.
It gives a list based on either the first, second, or third number.
The program also has a check box to disable the auto-off while checking combinations.
Any damage done is the responsibility of the user
StartAp StartAp is a PDA extension application that allows the user to select which application to start when power is applied to the PDA. Instead of returning to the same application that was running when the PDA was turned off (or powered itself off) the user selected application is started when the PDA is powered on
CFX CFX allows you to store/retrieve files directly to/from TRGpro's CF card using the XMODEM protocol in your standard terminal program
Other Software by developer «Larson Computing»:
not found
Comments on SerialFix:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
SerialFix is compatible with your device Clie TH55
