Getdeblu - It allows you to receive files into the expansion card through Bluetooth, IrDA, HotSync, etc.
Like it? Share with your friends!
Supported operating systems:
Palm OS 4.x, Palm OS 5.x
Similar Software:
BtServer BtServer - uses Palm's Bluetooth virtual serial driver to communicate with other Bluetooth devices that support the Serial Port Profile.
It opens the Bluetooth virtual serial driver in server mode. This creates an RFCOMM listening socket and an SDP entry that advertises the Serial Port Profile
BtSerial BtSerial is a tool which helps you improve the connectivity of your Palm device at the moment you connect, via Bluetooth, to other devices like phones, laptops etc.
BtSerial Pro uses the Bluetooth Serial Port Profile (SPP) to connect to other Bluetooth devices. After discovering the device, they establish a L2CAP, then RFCOMM connection to it
FixWiFi FixWiFi - Due to an apparent bug in the Palm TX's and LifeDrive's operating system, an unnecessary event (firstUserEvent) is generated whenever the WiFi disconnects (e.g., due to inactivity) or fails to connect.
This can result in incorrect functionality in whatever application is running when the disconnect happens
Nemerix BT GPS Nemerix BT GPS- simple application that replicates some of the configuration functions of the RCT (Receiver Control Tool) PC application so that the GPS receiver may be configured from a Palm device.
After making the Bluetooth connection to the GPS, the user can perform Factory, Cold, Warm and/or Hot resets
WifFi WifFi is a scanner for locating wireless Access Points (APs) using your WiFi enabled Palm OS device.
Installation
Download WifFi.
Install WifFi on your device
Start the scan and walk/jog/drive around searching for access points
Blue Fang Blue Fang is a utility that simplifies the management of your handheld's Bluetooth radio, making it is easy to keep Bluetooth off when you don't need it, and on when you do. As well as being a more convenient way of controlling Bluetooth, this helps to reduce the drain on your battery
USB-2-IR USB-2-IR is a repeater between the USB and the infrared port of a Visor.
It sends all data it gets on one port to the other.
The infrared port can be used in IrCOMM mode or in the raw SIR mode.
Therefore you are able to connect your computer via USB to to an IrDA device like cell phones or a GPS
TriConnect TriConnect is a freeware program for communicating through Bluetooth, TCP/IP and Serial line.
It can both establish outgoing and listen for incoming connections. The program uses the TriComm C++ library to provide these features.
For wireless communications, the Bluetooth Serial Port Profile is used
Dial! (English) Dial! (English) - Dial telephone numbers and write SMS-messages with your Palm.
Dial! offers an easy way to communicate with your GSM mobile phone over the IR-port
Softick Blue Files Softick Blue Files - Don't you want Card Export II for Bluetooth? Here it is, we call it Softick Blue Files
Other Software by developer «Rodolfo Turco»:
FrequencyP FrequencyP - Serial CTS digital frequency meter.
Measure the frequency on CTS serial pin, typically with a 1Hz - 3kHz range on old Palms.
What's New in This Release:
· Added the pulse counter