Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
SQ Pocket SQ Pocket-alternative task switching application that does better system status, launcher and much more, including screen captures!
Function:
- Task switch
- Task close
- Display a Bitmap (BMP,2BP)/JPG image in the background (JPG file standard encoding only. Not supports progressive encoding
iFonz 2 iFonz 2 is a new Windows Mobile interface, with a lots of customization and a fully graphical design and animations for Windows Mobile 5/6 completely writed in .NET.
It is a clone of iPhone interface, with a lots of customization and a fully graphical design and animations.
- Uninstall older version
- Extract ZIP in any folder and start iFonz.exe
P.S
SK Today Commander SK Today Commander is used to manage different Today screen configurations (profiles), and to switch them easily
Touch Shell Free Touch Shell Free is an application offering modern and flexible user interface for Windows Mobile Devices. The ultimate must-have for all Windows Mobile Pocket PC Phone users, Touch Shell makes your device more usable than ever and adds rich graphics and fabulous 3D effects to the interface
SysColor Changer SysColor Changer is a Pocket PC application to change the system colors, e.g. system text color.
Usage Notes:
Select a component from the dropdown list that you wish to change.
Tap on the color box to select a color for the component.
Tap on the "Apply" after selecting the colors for all the components.
Exit and Soft Reset to activate the changes
Manila 2D TodayPage Manila 2D TodayPage - This application displays standard today plug-ins in different Manila 2D pages.
With this program you can:
* Put many different standard today plug-ins into different Manila pages,
* Easily increase space between plug-ins,
* Define auto switching to Home page
GORAPSWeather Widget for Androkkid GORAPSWeather Widget - Weather widget for Androkkid.
Installation and Setup Instructions:
1) Download and unpack GORAPSWeather.zip
2) Open GorapsWeather.mscr with a text editor and make the appropriate changes to the two variables: location and units.
- Change location to the accuweather.com location code for your location.
If you need to find your code go to www
o3touch O3touch is a windows mobile dialer that significantly speeds up calling, searching, texting and emailing your contacts making the use of the phone (and you) much more effective
Today Life Today Life XML customizable full screen Today screen with custom PNG/ZLIB decoder.
No install required - No Mobile Shell required - No third party programs required - this replacement for your Today screen is fully contained - and fully FREE!
Simply copy all files to a folder on the device and run the EXE.
Every resolution is supported
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device Datalogic Mobile J Series
