LeoCpuSpeed is an app to control the speed of the CPU. Started out as a test to determine if the "1ghz hack" was genuine or not, and ended up to be able to control cpu speed and to overclock to some degree.
Notes on auto-apply speed at startup
1) Disable autoscaling
2) Select the cpu speed you want
3) Menu > Apply speed at boot
Notes on overclocking
1) Obviously overclocking is completely at your own risk, as you could harm your device. Luckily, in most cases, your device will just lock up and you'll need to restart your device (remove battery, re-insert and turn on again).
2) The green buttons were the overclock settings that have been successful 9 out of 10 times. The orange speeds have been successful like 5 out of 10 times. The red speeds have never worked for me yet.
3) The higher the speed, the more unstable. This is mainly because I don't have a way to increase voltage of the core.
4) Overclocking only works on AC power! When on battery power, the overclock will work but will be undone within 500 milliseconds by the OS. Something within the OS, or a driver, or the radio rom, enforces the proper CPU speed every 500ms.
Notes on battery
I have seen only very very miniscule differences on battery usage when using 998MHz all the time. You really wouldn't notice the difference if it were at 998MHz all the time, or at 768MHz (default). The only thing you _do_ notice, is that it feels snappier.
Try playing a decent movie in TCPMP or coreplayer with autoscaling on, and try again with autoscaling off and at 998mhz. Huge difference. (Note that some ROMs already have autoscaling disabled and will run at 998MHz all the time, like CleanEX. You won't notice a difference there obviously.)
· Updates CPU speed every half second (calculated from the processor registered directly! not from some driver)
· Can stress the CPU to show you that it goes up to 998mhz under load (when idle speed is less than 998mhz)
· Disable autoscaling so that you can control the speed yourself
· Select the speed you want by moving the slider or pressing 768/998 presets
· Automatically disable autoscaling and set speed at boot (via menu)
· Overclocking
What's New in This Release:
· For advanced users only: call LeoAutoCpuSpeed.exe with a custom performance level to set that speed (and disable autoscaling if enabled). So, calling "LeoAutoCpuSpeed 12" will set it to 768MHz. And FYI, 18 = 998MHz.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Requirements:HTC Leo
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
HD2 Tweak HD2 Tweak is tool allows you to tweak your HTC Touch HD2 very easily, to customize it and optimize it as you want. It includes many tweaks with descriptions. Choose your tweak, check option, and simply apply it!
Note: Since many options need a soft reset, you will have to restart your device to completely apply them
Flash Gadgets Dozens of small gadgets for Windows Mobile
LockAndOff LockAndOff will lock hardware buttons on your communicator, then immediately turn the device off
SuspendScheduler SuspendScheduler - SuspendScheduler allows you to set the times when your PocketPC power suspend will be disabled. You can make a power chart file and set the times when the power stays on. The program will keep the power on in the selected time slots. NOTE: Use caution when using this program since you can drain your PocketPC battery
Hot Fix for G-Sensor Calibration in HTC Touch Diamond If you encounter a G-Sensor malfunction, for example when playing the "Teeter" game or changing your web browser orientation, install this hot fix so that you can perform the calibration by yourself
FileDuplicator FileDuplicator - This program allows you to select a text file on your PocketPC. Then you enter the number of copies you want of the 'template' file made and writes them with a number suffix.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
rk-Sleep rk-Sleep - Ok, here is the phone switcher (flight mode on/off) based on the cell tower ID.
System automatically switches OFF phone when you are at predefined location (Say Home) based on the time you setup. So when you are at home, say from 10:00 PM to morning 6:00 AM your phone is really sleeping so no one can call your mobile
AE Button Plus AE Button Plus - Extends functionality of hardware keys on Windows Mobile devices
S2U2SettingsPlus S2U2SettingsPlus - S2U2SettingsPlus adds functionality to S2U2 Settings.
Can edit:
S2U2 Lock/Unlock wave files.
S2U2 Text
S2A Text
S2U2Unlock Path (what is launched when S2U2 unlocks).
Usage:
Install and load.
Select wav/exe files by clicking on the "..." buttons next to the text box
Kai's Cleaning Pack Kai's Cleaning Pack - Keep your Pocket PC clean. In this package are include 5 programs for keep cleaning your Pocket PC
Other Software by developer «Martijn Stolk»:
KeypadLedControl KeypadLedControl By default the keypad lights turn off after 10 seconds when the device comes out of standby. This little application keeps the light on while the display is on
LeoExtendedNotifications LeoExtendedNotifications is a small app that blinks the keypad when there are notifications.
If you also use KeypadLedControl, you may get some irregular blinking during notifications. Nothing serious
TorchButton TorchButton Dropped your keys? Finding something behind the bench? Performing surgery on a computer and need to find that jumper on the mainboard?
This is a simple application built for some HTC devices that have a hardware LED, normally used to take pictures in the dark. However the LED can be used as a handy pocket flashlight
Msm7kCpuSpeed Msm7kCpuSpeed - An application for overclocking the MSM7k SoC on the Raphael. The same processor is present on the Diamond, Rhodium and the Topaz, so it should work on all of these devices. It was able to underclock to 57MHz and overclock up to 710MHz, using small 19.2MHz steps
