LeoCpuSpeed is an app to control the speed of the CPU. Started out as a test to determine if the "1ghz hack" was genuine or not, and ended up to be able to control cpu speed and to overclock to some degree.
Notes on auto-apply speed at startup
1) Disable autoscaling
2) Select the cpu speed you want
3) Menu > Apply speed at boot
Notes on overclocking
1) Obviously overclocking is completely at your own risk, as you could harm your device. Luckily, in most cases, your device will just lock up and you'll need to restart your device (remove battery, re-insert and turn on again).
2) The green buttons were the overclock settings that have been successful 9 out of 10 times. The orange speeds have been successful like 5 out of 10 times. The red speeds have never worked for me yet.
3) The higher the speed, the more unstable. This is mainly because I don't have a way to increase voltage of the core.
4) Overclocking only works on AC power! When on battery power, the overclock will work but will be undone within 500 milliseconds by the OS. Something within the OS, or a driver, or the radio rom, enforces the proper CPU speed every 500ms.
Notes on battery
I have seen only very very miniscule differences on battery usage when using 998MHz all the time. You really wouldn't notice the difference if it were at 998MHz all the time, or at 768MHz (default). The only thing you _do_ notice, is that it feels snappier.
Try playing a decent movie in TCPMP or coreplayer with autoscaling on, and try again with autoscaling off and at 998mhz. Huge difference. (Note that some ROMs already have autoscaling disabled and will run at 998MHz all the time, like CleanEX. You won't notice a difference there obviously.)
· Updates CPU speed every half second (calculated from the processor registered directly! not from some driver)
· Can stress the CPU to show you that it goes up to 998mhz under load (when idle speed is less than 998mhz)
· Disable autoscaling so that you can control the speed yourself
· Select the speed you want by moving the slider or pressing 768/998 presets
· Automatically disable autoscaling and set speed at boot (via menu)
· Overclocking
What's New in This Release:
· For advanced users only: call LeoAutoCpuSpeed.exe with a custom performance level to set that speed (and disable autoscaling if enabled). So, calling "LeoAutoCpuSpeed 12" will set it to 768MHz. And FYI, 18 = 998MHz.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Requirements:HTC Leo
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
Shubaroo Bluetooth Toggle Shubaroo Bluetooth Toggle - When you are in a phone call the Phone application by default shows on the screen. If you want to transfer the phone call to bluetooth headset, and bluetooth is turned off, you have to enter the Comm manager to enable bluetooth before you can enable the Headset from the Phone application's context menu
Seeker of Special Seeker of Special - You always want find out more info about your PDA, where are all the special directories? SoS is handy. It stands for "Seeker of Special Folders".
It is FREE. But we don't mind if you'd like to donate $3.00 for us to continue the development
Kai's Phone Pack.Net Kai's Phone Pack.Net - Use all possible opportunities of your Windows Mobile Phone. You save more than 70 US$ compared to single purchase.
Call Manager.Net Plan your calls
Babyphone.Net Room monitoring
Car Dialer.Net Call Phone Numbers with big Buttons in the car
GPS Tracker.Net Send your Location per SMS to eMail
Mute Timer
Hot Fix to Enhance Response Time for HTC Touch HD Hot Fix to Enhance Response Time for HTC Touch HD - Sometimes the screen stops responding for about 3 to 5 seconds when running an application that needs to use the stylus to click the screen repeatedly within a short time. For example, the windows built-in software like email, SMS, solitaire, etc.
Note: This hot fix can only be installed in ROM version less than 1.19.xxx
XCPUScalar 2007 XCPUScalar allows you to dynamically scale the processor speed of your handheld Pocket PC 2002, 2003, WM2003 SE, and Windows Mobile 5. It uses the power of the XSCALE or TI OMAP (OMAP850 and OMAP1510) processor and unlocks its dynamic scaling capabilities. You can scale the processor speed from 100 to 728MHz
Clear Temp Clear Temp is a utility which cleans the Temp folder each time you reset your device
Appreciation Offer Appreciation Offer - Unzip file, copy and paste the selected file into your Pocket PC's "Windows" or "My Documents" folder. Click Start-Settings-Today, then highlight the theme you want, then click ok
ValkSoft Space Reclaimer ValkSoft Space Reclaimer -"In summary, this is a very useful utility. It's lightweight and performs its tasks extremely quickly." - Pocket PC Life.
"...a product that dispenses with detritus, clears away the cookie crumbs, and takes out the temp-trash is practically priceless. In short, Space Reclaimer kicks butt." - DingBat Magazine
nueUSBKeyboard nueUSBKeyboard - nueUSBKeyboard turns your mobile device into a real USB HID Keyboard, allowing you to use your device's keyboard (or soft keyboard) to enter text, control the BIOS, etc on your computer, or other USB Host that accepts HID Keyboards (i.e. Playstation3, XBOX360, etc.)
Other Software by developer «Martijn Stolk»:
KeypadLedControl KeypadLedControl By default the keypad lights turn off after 10 seconds when the device comes out of standby. This little application keeps the light on while the display is on
TorchButton TorchButton Dropped your keys? Finding something behind the bench? Performing surgery on a computer and need to find that jumper on the mainboard?
This is a simple application built for some HTC devices that have a hardware LED, normally used to take pictures in the dark. However the LED can be used as a handy pocket flashlight
Msm7kCpuSpeed Msm7kCpuSpeed - An application for overclocking the MSM7k SoC on the Raphael. The same processor is present on the Diamond, Rhodium and the Topaz, so it should work on all of these devices. It was able to underclock to 57MHz and overclock up to 710MHz, using small 19.2MHz steps
LeoExtendedNotifications LeoExtendedNotifications is a small app that blinks the keypad when there are notifications.
If you also use KeypadLedControl, you may get some irregular blinking during notifications. Nothing serious
