Categories: Multimedia & Graphics, System Utilities
Upload date: 21 Jan 11
Developer: Zevele
License: Freeware
Downloads: 6221 File Size: 343 Kb
AutoLoudspeaker is an application that will automatically turn on the loudspeaker when the phone is away from the ear, and turns it off when it is near the ear.
AutoLoudspeaker is fairly simple to use. When running the application a service starts. If the shortcut is pressed again, a notification message pops and the user can choose to close the service. As long as the service runs the loudspeaker will automatically switch on if the proximity sensor is unblocked and off if it is blocked (only during an active phone call).
· Switch the loudspeaker according to the proximity-sensor or g-sensor.
· Answer an incoming call by gesture (wave your hand in front of the proximity-sensor).
What's New in This Release:
· Add ability to automatically answer a call when the proximity sensor is blocked (altec1000's request). This feature can be set by selecting the "Block" gesture in the settings window. The gesture first waits for the sensor to be unblocked for a certain amount of time, after which it checks that the sensor is blocked for a second period of time - only if both periods were fulfilled AutoLoudspeaker will answer the call. Two registry keys were added: BlockGestureOpenDelay - Sets the minimum period (in msec) the sensor has to be unblocked before checking the block status. BlockGestureBlockDelay - Sets the minimum period (in msec) the sensor has to be blocked before answering the call.
· Add command-line controls (to Start/Stop the service). Two commands are available: quit - Stops the service. update - Force AutoLoudspeaker to reread the settings from the registry.
· Changed the notification behavior. Now pressing the notification immediately brings the Settings application.
· I've included the proximity-sensor registry keys of Omnia2 reported by O2amksin.
· Some minor code and gui changes.
What's New in 1.5:
· Reverted to the polling method of v1.3 for the Proximity-Sensor (it just works better). This should also solve the exception on devices with no proximity sensor.
· Fixed issue where AutoLoudspeaker failed to create a shortcut in a non-English localizations.
· Fixed issue where the notification icon remained visible when the service was closed from the settings application.
· Fixed an issue where the delay occurred also before turning the speaker off (instead of just before turning it on).
· Added a short vibration before changing the loudspeaker state. The vibration length can be set via the registry value: HKCU/Software/AutoLoudspeaker/VibrationLength (default: 20ms). The vibration LED index can be set via the value: HKCU/Software/AutoLoudspeaker/VibrationLED (default: 1 - this is the one for the HD2).
· If proximity sensor is not detected (it's registry keys are missing) the possibility to select the proximity method is disabled in the settings application.
· Some performance improvement for the "managed service" code
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 2003, Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
BugScrambler BugScrambler - This program can be used to scramble a listening bug. Tap the button and your PocketPC will make a sound that would make it hard to listen into the conversation.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
PhoneAnswerer PhoneAnswerer - This program allows you to record your phone greeting and play it back in another person's voice.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
VoiceCompressed VoiceCompressed - This program is a voice recorder that ZIPs the wave file after recording. You can then browse the ZIP files on your PocketPC. Tap on a ZIP file to unzip it and play it. The program also has a mute button. The ZIP compression/decompression routines from Info-Zip.org.
This program requires that you have both the 'BeanDLL
SoundEffects SoundEffects - This program is a set of 10 sound effects. When you are talking to a person on the phone you can make it sound like you are in another area.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
MusicFMMp3Pictures MusicFMMp3Pictures allows you to browse the MP3/WMA files on your PocketPC and downloads the singers/bands images in bulk to the storage card. Select the Mp3/WMA file and tap on it download the images from the Last.fm website. This service is provided by Last
FrequencyFolders FrequencyFolders - FrequencyFolders allows you to create and replay wave file frequency tones files in a file explorer interface. Select 'New' from the toolbar to add a new tone file. You can select the frequency (in Hz) and the length. When you tap save the program will create the wave file in the current folder
PoweronVoice PoweronVoice - PoweronVoice lets you make a voice greeting that is played when your Windows Mobile device is powered on. Simply tap the button to record your voice message and tap again to stop recording. Select 'Set PowerOn' and each time your device is powered on the program will play the voice message. You can also remove the message in the settings
ProgressRecorder ProgressRecorder is a high definition 44Khz mono voice recorder. It allows you to set a 'maximum time' to each recording. Select 'Record' from the toolbar and enter the name for the file to the recorder and tap the 'Stop Record' button to stop the voice recorder. NOTE: The program overrides the default WindowsCE wave format settings
Drum Loop Osymo Drum Loop is an electronic drums software for creating drum loops. You can use this application for composing or as an accompaniment or a luxury metronome for your guitar, bass, piano or another instrument practising
Other Software by developer «Zevele»:
Zevele's Blinker Zevele's Blinker - This application blinks the device LED every few seconds. The idea is to have some notification that the device is still alive.
· Blink the LED every few seconds. If the battery level is below the threshold, orange led is blinking otherwise the green on is used
Zevele's SimplePiano Zevele's SimplePiano - A simple piano application for Windows Mobile.
· WVGA, VGA, QVGA, HVGA versions.
· It has three octaves.
· Record and Playback.
· Dualtouch via the PinchToZoom events
· Customizable skins.
· Customizable sounds (currently include Piano, Acoustic Guitar & Violin)
