LeoCpuSpeed is an app to control the speed of the CPU. Started out as a test to determine if the "1ghz hack" was genuine or not, and ended up to be able to control cpu speed and to overclock to some degree.
Notes on auto-apply speed at startup
1) Disable autoscaling
2) Select the cpu speed you want
3) Menu > Apply speed at boot
Notes on overclocking
1) Obviously overclocking is completely at your own risk, as you could harm your device. Luckily, in most cases, your device will just lock up and you'll need to restart your device (remove battery, re-insert and turn on again).
2) The green buttons were the overclock settings that have been successful 9 out of 10 times. The orange speeds have been successful like 5 out of 10 times. The red speeds have never worked for me yet.
3) The higher the speed, the more unstable. This is mainly because I don't have a way to increase voltage of the core.
4) Overclocking only works on AC power! When on battery power, the overclock will work but will be undone within 500 milliseconds by the OS. Something within the OS, or a driver, or the radio rom, enforces the proper CPU speed every 500ms.
Notes on battery
I have seen only very very miniscule differences on battery usage when using 998MHz all the time. You really wouldn't notice the difference if it were at 998MHz all the time, or at 768MHz (default). The only thing you _do_ notice, is that it feels snappier.
Try playing a decent movie in TCPMP or coreplayer with autoscaling on, and try again with autoscaling off and at 998mhz. Huge difference. (Note that some ROMs already have autoscaling disabled and will run at 998MHz all the time, like CleanEX. You won't notice a difference there obviously.)
· Updates CPU speed every half second (calculated from the processor registered directly! not from some driver)
· Can stress the CPU to show you that it goes up to 998mhz under load (when idle speed is less than 998mhz)
· Disable autoscaling so that you can control the speed yourself
· Select the speed you want by moving the slider or pressing 768/998 presets
· Automatically disable autoscaling and set speed at boot (via menu)
· Overclocking
What's New in This Release:
· For advanced users only: call LeoAutoCpuSpeed.exe with a custom performance level to set that speed (and disable autoscaling if enabled). So, calling "LeoAutoCpuSpeed 12" will set it to 768MHz. And FYI, 18 = 998MHz.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Requirements:HTC Leo
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
All Day Events Sound Fix All Day Events Sound Fix - Solution for the "all day events no sound notification" BUG in Windows Mobile 6.1. It occurs in WM 6.1 , builds >20000 and
Known limitations:
For some reason, the workaround only works with WAV files set as sound for reminder. WMA files don't work
Kai's Phone Pack.Net Kai's Phone Pack.Net - Use all possible opportunities of your Windows Mobile Phone. You save more than 70 US$ compared to single purchase.
Call Manager.Net Plan your calls
Babyphone.Net Room monitoring
Car Dialer.Net Call Phone Numbers with big Buttons in the car
GPS Tracker.Net Send your Location per SMS to eMail
Mute Timer
XCPUScalar for Samsung i700 Phone XCPUScalar for Samsung i700 Phone - New version 2.3, now with Auto Scale, CPU Meter, Health meters & Auto Start on Soft Reset.
This product was designed for the Samsung i700 Pocket PC phone edition only. XCPUScalar allows you to dynamically scale the processor speed of your handheld Pocket PC 2002
Kai's Phone Pack.Net Kai's Phone Pack.Net - Nutzen Sie alle Moglichkeiten Ihres Windows Mobile Telefons. Sie sparen uber 80 EUR gegenuber Einzelkauf.
Anruf Manager.Net Planen Sie Ihre Anrufe
Babyphone.Net Raumuberwachung
Car Dialer.Net Nummern im Auto wahlen mit grossen Tasten
GPS Tracker.Net Position per SMS to eMail senden
Mute Timer
X1BC (X1 Button Controller) X1BC (X1 Button Controller) is capable of capturing both short and long presses of panel key, ok key, L/R softkeys, up/down volume keys, and the win key on the slide out KB. The camera half and full press can also be captured and fully configured for short and long half press, as well as short and long full press
IndiBar LITE IndiBar LITE
Task Manager allows to operate the started application (Switch, Close, Close all, Close Incative)
Task Panel it is show and switching of active application in the top bar
Indicators
Pocket Talkit Pocket Talkit - Introduction:
Pocket Talkit was written for the mobile user who does not always find it convenient to use a stylus to enter and retrieve information from their Pocket PC.
With Pocket Talkit information can be accessed without a stylus
Update for HTC HD2 - SD Card Storage Capacity Update for HTC HD2 - SD Card Storage Capacity - This update for HTC HD2 further extends support of the SD Storage Capability. Taking pictures with your 5 Megapixel lens and dual LED flash can only truly be appreciated at the maximum quality, and now with this update, you will be able to appreciate how much more you can store in your 8GB or more SD Card
TorchButton TorchButton Dropped your keys? Finding something behind the bench? Performing surgery on a computer and need to find that jumper on the mainboard?
This is a simple application built for some HTC devices that have a hardware LED, normally used to take pictures in the dark. However the LED can be used as a handy pocket flashlight
LeoExtendedNotifications LeoExtendedNotifications is a small app that blinks the keypad when there are notifications.
If you also use KeypadLedControl, you may get some irregular blinking during notifications. Nothing serious
Msm7kCpuSpeed Msm7kCpuSpeed - An application for overclocking the MSM7k SoC on the Raphael. The same processor is present on the Diamond, Rhodium and the Topaz, so it should work on all of these devices. It was able to underclock to 57MHz and overclock up to 710MHz, using small 19.2MHz steps
KeypadLedControl KeypadLedControl By default the keypad lights turn off after 10 seconds when the device comes out of standby. This little application keeps the light on while the display is on
